外文翻译
论文题目：大型企业网络的设计与规划姓名：贾龙飞
学号：0230
班级：1122102班
年级：2011级
专业：网络工程
学院：软件学院
指导教师：王志波（讲师）
完成时间：二〇一五年四月
目录
NETWORKS ....................................... 错误!未定义书签。
DATE COMMUNICATIONS .......................... 错误!未定义书签。
OF COMPUTER NETWORKS ........................... 错误!未定义书签。
OSI Reference Model ......................... 错误!未定义书签。
TCP/IP Reference Model ...................... 错误!未定义书签。
AREA NETWORK ................................... 错误!未定义书签。
SWITCHED NETWORKS ........................... 错误!未定义书签。
2．LEASED LINE NETWORKS ...................... 错误!未定义书签。
SWITCHING NETWORKS .......................... 错误!未定义书签。
AREA NETWORK ................................... 错误!未定义书签。
............................................. 错误!未定义书签。
media ....................................... 错误!未定义书签。
3. Medium access control methods ............. 错误!未定义书签。
1.计算机网络.................................... 错误!未定义书签。
数据通信..................................... 错误!未定义书签。
2.计算机网络的体系结构.......................... 错误!未定义书签。
参考模型..................................... 错误!未定义书签。
IP参考模型 .................................. 错误!未定义书签。
3.广域网........................................ 错误!未定义书签。
1.电路交换网................................. 错误!未定义书签。
2.专线网..................................... 错误!未定义书签。
3.分组交换网................................. 错误!未定义书签。
4.局域网........................................ 错误!未定义书签。
1.拓扑结构................................... 错误!未定义书签。
2.传输媒体................................... 错误!未定义书签。
3.媒体访问控制方法........................... 错误!未定义书签。
NETWORKS
DATE COMMUNICATIONS
The end equipment which either generates the digital information for transmission or uses the received digital data can be computer ,printers ,keyboards, CRTs, and so on. This equipment generally manipulates digital information internally in word units—all the bits that make up a word in a particular piece of equipment are transferred in parallel. Digital data, when transmitted, are in serial form. Parallel transmission of an 8-bit word require eight pairs of transmission lines—not at all cost-effective. Data terminal (DTE) is a general phrase encompassing all of the circuitry necessary to perform parallel-to-serial and serial-to-parallel conversions for transmission and reception respectively and for data link management. The UART (Universal Asynchronous Receiver/Transmitter) and USART (Universal Asynchronous/Asynchronous Receiver/Transmitter) are the devices that perform the parallel-to-serial and serial-to-parallel conversions. The primary DTE includes a line control unit (LCU or LinCo) which controls the flow of information in a multipoint data link system. A station controller (STACO) is the corresponding that belonged to the subscriber in a data link system. Between the DTEs, starting with the modems, was communications equipment owned and maintained by Telco property.
Data communications equipment (DCE) accepts the serial data stream from the DTE and converts it to some form of analog signal suitable for transmission on voice-grade lined. At the receive end, the DCE performs
the reverse function of converting the received analog signal to a serial digital data stream. The simplest form of DCE is a modem (modulator/demodulator) or data set. At the transmit end, the modem
can be considered a form of digital-to-analog converter, while at the receive end, it can considered a form of analog-to-digital converter. The most common of modulation by modems are frequency shift keying (FSK), phase shift keying (PSK), and quadrature amplitude modulation (QAM). This is a typically data transmission mode using the analog telephone lines. If you transmit data by digital channel (sometimes
it is called “Digital T-carrier”), a pulse Code Modulation (PCM) equipment must be used. A microwave transmission system can also be used for the data communication. Finally, you can use the satellite communication system for data transmission.
If the cables and signal levels used to interconnect the DTE and DCE were left unregulated, the variations generated would probably be proportional to the number of manufacturers. Electronics industries Association (EIA),an organization of manufactures with establishing
the DTE and modem. This is a 25-pincable whose pins have designated functions and specified signal levels. The RS-232C is anticipated to
be replaced by an update standard.
OF COMPUTER NETWORKS
Computer network is a complex consisting of two or more conned computing units, it is used for the purpose of data communication and resource resource sharing. Design of a network and its logical structure should comply with a set of design principles, including the organization
of functions and the description of data formats and procedure. This is the network architecture and so called as a set of layers and protocols, because the architecture is a layer-based.
In the next two sections we will discuss two important network architectures, the OSI reference model and the TCP/IP reference model.
OSI Reference Model
The OSI model is shown in (minus the physical medium). This model is based on a proposal developed by the International Standards Organizations (OSI) as the first step toward international standardization of the protocols used in the various layers. The model is called the ISO OSI (Open System Interconnection) Reference Model because it deals with connecting open systems--that is, systems that are open for communication with other systems, We will usually just call it the OSI model for short.
The OSI model has seven has seven layers. Note that the OSI model itself is not a network architecture because it does not specify the exact services and protocols to be used in each layer. It just tells what each layer should do. However , However, ISO has also produced standards for all the layers, although these are not part of the reference model itself. Each one has been published as a separate international standard.
TCP/IP Reference Model
The TCP/IP reference model is an early transport protocol which was designed by the US Department of Defence (DOD) around in 1978. It is often claimed that it gave rise the OSI “connectionless” mode of operation. TCP/IP is still used extensively and is called as a industrial standard
of internet work in fact, TCP/IP has two parts: TCP and IP. TCP means it is on the transport layer and IP means it is on the network layer separately.
are two end-to-end protocols in the transport layer, one of which is TCP (Transmission Control Protocol) , another is UDP (User Datagram Protocol). TCP is a connection-oriented protocol that allows a byte stream originating on one machine to be delivered without error on any other machine in the internet. UDP is an unreliable, connectionless protocol for application that do not want TCP’s sequencing of flows control flow control and wish to provide their own.
network layer defines an official packet format and protocol called IP (Internet protocol). The job of the network layer is to deliver IP packets where they are supposed to go.
The TCP/IP Reference Model is shown in On top of the transport layer is the application layer, It contains all the higher-level protocols. The early ones included virtual terminal (TELNET), file transfer (FTP), electronic mail (SMTP) and domain name service(DNS).
AREA NETWORK
A wide area network, or WAN, spans a large geographical area, often a country or continent . It contains a collection of machines intended for running user (i. e. , application) programs. We will follow traditional usage and call these machines hosts. By a communication subnet, or just subnet for short. The job of the subnet is to carry messages from host to host, just as the telephone system carries words from speaker to listener. By separating the pure communication aspects of the network (the subnet) from the application aspects (the hosts), the complete network design is
greatly simplified. Relation between hosts and the subnet is shown in .
One of many methods that can be used to categorize wide area networks is with respect to the flow of information on a transmission facility. If we use this method to categorize wide area networks, we can group them into three basic types: circuit switched, leased line and packet switched.
SWITCHED NETWORKS
The most popular type of network and the one almost all readers use on a daily basis is a circuit switched network. The public switched telephone network, however, is not limited to the telephone company, By purchasing appropriate switching equipment, any organization can construct their own internal circuit switched network and, if desired, provide one or more interfaces to the public switched network to allow voice and data transmission to flow between the public network and their private internal network
2．LEASED LINE NETWORKS
This is a dedicated network connected by leased lines. Leased line is a communications line reserved for the exclusive use of a leasing customer without inter-exchange switching arrangements. Leased or private lines are dedicated to the user. This advantage is that the terminal or computer is a always physically connected to the line. Very short response times are met with service.
SWITCHING NETWORKS
A packet network is constructed through the use of equipment that
assembles and disassembles packets, equipment that routes packet, and transmission facilities used to route packets from the originator to the destination device. Some types of data terminal equipment (DTE) can create their own packets, while other types of DTE require the conversion of their protocol into packets through the use of a packet assembler / disassemble (PAD). Packets are routed through the network by packet switches. Packet switches examine the destination of packets as they flow through the network and transfer the packets onto trunks interconnecting switches based upon the packet destination destination and network activity.
Many older pubic networks follow a standard called . It was developed during 1970s by CCITT to provide an interface between public packet-switched network and their customers.
CCITT Recommendation controls the access from a packet mode DTE, such as a terminal device or computer system capable of forming packets, to the DCE at a packet mode. CCITT Recommendation controls the interface between non-packet mode devices that cannot interface between the PAD and the host computer. CCITT Recommendation specifies the parameter settings on the PAD and specifies the interface between packet network.
AREA NETWORK
Local area data network , normally referred to simply as local area network or LANs, are used to interconnect distributed communities of computer-based DTEs located within a building or localized group of building. For example, a LAN may be used to interconnect workstations distributed around offices within a single building or a group of buildings such as a university campus. Alternatively, it may be complex. Since all
the equipment is located within a single establishment, however, LANs are normally installed and maintained by the organization. Hence they are also referred to as private data networks.
The main difference between a communication path established using a LAN and a connection made through a public data network is that a LAN normally offers much higher date transmission rates because of the relatively short physical separations involved. In the context of the ISO Reference Model for OSI, however, this difference manifests itself only at the lower network dependent layers. In many instances the higher protocol layers in the reference model are the same for both types of network.
Before describing the structure and operation of the different types of LAN, it is perhaps helpful to first identify some of the selection issues that must be considered. It should be stressed that this is only a summary; there are also many possible links between the tips of the branches associated with the figure.
Most wide area networks, such as the PSTN, use a mesh (sometimes referred to as a network) topology. With LANs, however, the limited physical separation of the subscriber DTEs allows simpler topologies to be used. The four topologies in common use are star, bus ,ring and hub.
The most widespread topology for LANs designed to function as data communication subnetworks for the interconnection of local computer-based equipment is the hub topology, which is a variation a variation of the bus and ring. Sometimes it is called hub/tree topology.
media
Twisted pair, coaxial cable and optical fiber are the three main type of transmission medium used for LANs.
3. Medium access control methods
Two techniques have been adopted for use of the medium access control in the LANs. They are carrier-sense-multiple-access with collision detection (CSMA/CD), for bus network topologies, and control token, for use with either bus or ring networks.
CSMA/CD is used to control multiple-access networks. Each on the network “listens” before attempting to send a message, waiting for the “traffic”to clear. If two stations try to sent their messages at exactly the same time, a “collision”is detected, and both stations are required to “step back” and try later.
Control token is another way of controlling access to a shared transmission medium that is by the use of a control (permission) token. This token is passed form one DTE to another according to a defined set of rules understood and adhered to by all DTEs connected to the medium. ADTE may only transmit a frame when it is in possession of the token and, after it has transmitted the frame, it passed the token on to allow another DTE to access the transmission medium.
1．计算机网络
数据通信
端设备可以是计算机、打印机、键盘、CRT等，它们可以产生要发送的数字信息，也可使用所接收的数字数据。这种设备通常在内部以字为单位处理数字信息——在一个实际设备中构成一个字的所有位是并行传递的。数字数据在发送一个8对传输线，这是不经济的。那些在发送、接收数据分别完成并-串和串-并转换并进行数据链路管理的所有电路，一般称为数据终端设备（DTE）。UART（通用异步接收/发送器）和USART（通用同步/异步接收/发送器）是实现并-串和串-并转换的设备。主DTE包括控制多点数据链路系统中信息流的线路控制部件（LCU 或LinCo）。从设备一方的相应设备是工作站控制器（STACO）。如果DTE有与LCU 相关的软件，则称为前端处理机（FEP）。同时，DTE也是数据链路系统中属于用户的最后一个设备。在两个DTE之间，先是调制解调器，接着是属于并有电话公司维护的通信设备。最近的调整结果是调制解调器已不属于电话公司独家管理的设备了。
数据通信设备（DCE）从DTE接收串行数据流，并将其转化成适合在话音线路上发送的某种模拟信号形式。在接收端，DCE完成相反的功能，把接收到的模拟信号转换成串行数字数据流。最简单的DCE是调制解调器或数传机。在发送端，调制解调器可以视为一种数/模转换器，而在接收端则可视为一种模/数转换器。调制解调器最常用的几种调制方式是移频键控（FSK）、移相键控（PSK）和正交调幅（QAM）。这是一种典型的使用模拟电话线路传输数据的方式。如果使用数字通信（有时称为T-载波）传输数据，则必须使用脉码调制（PCM）设备。也可以用微波传输系统进行的数据通信，当然还可以用卫星通信系统去传输数据。
如果链接DTE和DCE的电缆和信号电平都是未调整的，则所产生的偏差就是可能与生产厂家的数量成正比。电子工业协会（EIA）（由关心建立行业标准的厂
家组成的组织）同意将RS-232C作为DTE和调制解调器间的标准接口。它是一个25针电缆，每一针都规定了功能及信号电平，预计RS-232C将被修订的标准所取代。
2．计算机网络的体系结构
计算机网络是由两个或多个计算机设备互连而成的一种复合系统，用于数据通信和资源共享。网络设计及逻辑结构应该遵循一套设计原则，包括功能的组织与数据格式和过程的描述，这就是网络的体系结构。由于这种体系结构是分层次的，故又称为一组层次和协议。
下面两节将讨论两个重要的网络体系结构，即OSI参考模型和TCP/IP 参考模型。
1．OSI参考模型
OSI模型如图14-2所示（物理介质未画出）。这一模型是基于国际标准化组织（ISO）提出的一个建议，作为用于各层次的国际标准协议的第一步。该模型也称为ISO开放系统互连参考模型，因为它涉及开放系统的互连，即于其他系统的通信是开放的，通常简称为OSI模型。
OSI模型有7层。应该注意的是，OSI模型本身并不是一种网络体系结构，因为它不具体规定每一层所使用的确切的服务和协议。它只是说明每一层应该做什么。然而，ISO还是对各层制定出了标准，尽管这些标准不是参考模型本身的一部分。每一层都作为一个单独的国际标准来颁布。
2．TCP/IP参考模型
TCP/IP参考模型是美国国防部大约于1978年设计的一种早期的运输协议。该协议通常被视为OSI无连接工作方式的源头。TCP/IP仍在广泛的使用，并且被称为互联网事实上的行业标准。
TCP/IP有两部分：TCP和IP。TCP表明是处于运输层，IP意为是网络层。
（1）运输层有两个端到端协议，其中之一是传输协议（TCP），另一个是用户数据报协议（UDP）。TCP是一种面向连接的协议，它可以在互联网上无差错地将字节流从一台机器发送出去。UDP是一种不可靠的无连接协议，用于不希望那种TCP流控制序列，而希望只提供自身功能的场合。
（2）网络层定义了正式的分组格式及称为互联网协议的IP。该网络层的任务是将IP分组发送到指定的地方。
图14-3所示为TCP/IP参考模型。在运输层上面是应用层。应用层包括所有高层协议。早期的协议包括虚拟终IELNET、文件传送协议FTP、电子邮件（SMTP）和域名服务DNS。
3．广域网
广域网跨越地域很大，通常是一个国家或一个大陆。这种网络中汇集了运行各种用户程序（即应用程序）的计算机。本文还是沿用传统的称呼把它们叫做主机，在一些文献里有时也称其为端系统。这些主机是通过通信子网（有时简称子网）连接起来的。子网的任务是把报文从一个主机传送到另一个主机，就像电话系统把话音从讲话人传到收听者一样。把网络（子网）的纯通信任务与主机的应用任务分开以后，整个网络的设计工作就得到很大的简化。图14-4展示了主机与通信子网之间的关系。
广域网的分类方法很多，其中一种方法是按传输设备中的信息流分类。如果使用这种方法，可将广域网分成3种基本类型：电路交换、专线和分组交换。
1．电路交换网
电路交换网是最常用的并且是几乎所有用户都要用的网络类型。然而，公用电话交换网不限于电话公司。任何单位只要购买了合适的交换设备，就可以建立自己的内部电路交换网，而且如果需要，还可配置一至多个与公用交换网互连的接口，在公用网和他们的专用内部网之间话音和数据传输。
2．专线网
这是一种通过租用线连接的专用网。租用线是由租用客户专用的一条通信线，不须进行交换机间的交换。租用或私人线路是用户专用的。专线的优点是终端或计算机一直连在租用线上，服务的响应时间极短。
3．分组交换网
分组网络是用分组装拆设备、分组路由的设备，以及将分组从源传到目的地的设备构成的。某些类型的数据终端设备DTE可以生成他们自己的分组，而其他一些DTE则要使用分组装拆器（PAD）把其协议转化成分组。分组通过分组交换机在网上传递。当分组在网上传输时，分组交换机检查分组的目的地址，并且根据该分组的目的地址和网络的实际运行情况把分组传向互连交换机的中继结点。
早期网络的许多公用网一般都遵循X。25标准，该标准是20世纪70年代由CCITT开发的，旨在为公用分组交换网与用户之间提供一个接口。
CCITT X。25建议管理从一个分组型DTE，例如从一个具有分组功能的终端设备或计算机系统，去访问一个分组结点DCE。CCITT X。28建议的管理没有分组功能的非分组设备与PAD之间的接口。CCITT X。29建议定义的是PAD与主机之间的接口。CCITT X。3建议规定了PAD上的参数设定，X。75则规定了分组网之间的接口。
4．局域网
局域数据网一般简称为局域网，用于在一幢楼内或局限在楼群范围内把分散的基于计算机数据终端设备互连在一起。例如，一个局域网可以把一幢楼里或像大学校园内各个楼里的各个办公室的工作站连在一起。另外，局域网也可以把分布在工厂或医院建筑群中的计算机设备连在一起。由于所有这些设备都是一个单位的，因此局域网一般也由这些单位负责安装和维护。于
是这类局域网也叫做专用数据网。
用局域网方式建立的通信线路和通过公用数据网连接的线路两者的主要区别在于：因为局域网连接的设备之间相对来说距离较近，因而数据传输速率高的多。但是在ISO的OSI参考模型中，这两种网络是没有区别的。
在叙述几种不同类型的局域网的结构和工作之前先认识一下必须考虑的有关问题可能是很有帮助的。应该强调的是，这仅仅是一个概括，因为各分支之间还可能有很多链路。
1．拓扑结构
大多数广域网，如公共电话交换网（PSTN）就使用网状（有时称为网络）拓扑结构。而局域网，由于用户数据终端设备相距很近，可采用简单的拓扑结构。常用的有星形、总线、环形和集线器等4种拓扑结构。
应用最广的、用于本地计算机设备互连以进行数据通信的局域网拓扑结构是集线器拓扑结构。这种拓扑结构是总线和环形拓扑结构的变种。有时也称为集线器/树形拓扑结构。
2．传输媒体
双绞线、同轴电缆和光纤是局域网采用的3种主要传输媒体。
3．媒体访问控制方法
局域网中采用了两种媒体访问控制技术。他们是用于总线网络拓扑结构的带冲突检测的载波侦听多路存取（CSMA/CD）和既可用于总线又可用于环形网络的令牌控制技术。
CSMA/CD用来控制多路存取网络。网络上的每个站点在试图发送信息前先“侦听”，等待通路空闲。如果两个站点在同一时刻要发送信息，将会检测到冲突，这两个站点必须各自“后退”一步，以后再重试。
令牌控制是另一种用令牌去控制访问共享传输媒体的方法。该令牌按所有连入媒体的DTE都知道并遵守的一套确定的规则从一个DTE传向另一个DTE。当某一DTE掌握这一令牌时，它才能传送一帧数据，而在传送完该帧之后，要将令牌释放，以便其他DTE访问该传输媒体。
外文出处： 《Exploiting Software How to Break Code》By Greg Hoglund, Gary McGraw Publisher : Addison Wesley Pub Date : February 17, 2004 ISBN : 0-201-78695-8 译文标题： JDBC接口技术 译文： JDBC是一种可用于执行SQL语句的JavaAPI（ApplicationProgrammingInterface应用程序设计接口）。它由一些Java语言编写的类和界面组成。JDBC为数据库应用开发人员、数据库前台工具开发人员提供了一种标准的应用程序设计接口，使开发人员可以用纯Java语言编写完整的数据库应用程序。 一、ODBC到JDBC的发展历程 说到JDBC，很容易让人联想到另一个十分熟悉的字眼“ODBC”。它们之间有没有联系呢？如果有，那么它们之间又是怎样的关系呢？ ODBC是OpenDatabaseConnectivity的英文简写。它是一种用来在相关或不相关的数据库管理系统（DBMS）中存取数据的，用C语言实现的，标准应用程序数据接口。通过ODBCAPI，应用程序可以存取保存在多种不同数据库管理系统（DBMS）中的数据，而不论每个DBMS使用了何种数据存储格式和编程接口。 1．ODBC的结构模型 ODBC的结构包括四个主要部分：应用程序接口、驱动器管理器、数据库驱动器和数据源。应用程序接口：屏蔽不同的ODBC数据库驱动器之间函数调用的差别，为用户提供统一的SQL编程接口。 驱动器管理器：为应用程序装载数据库驱动器。 数据库驱动器：实现ODBC的函数调用，提供对特定数据源的SQL请求。如果需要，数据库驱动器将修改应用程序的请求，使得请求符合相关的DBMS所支持的文法。 数据源：由用户想要存取的数据以及与它相关的操作系统、DBMS和用于访问DBMS的网络平台组成。 虽然ODBC驱动器管理器的主要目的是加载数据库驱动器，以便ODBC函数调用，但是数据库驱动器本身也执行ODBC函数调用，并与数据库相互配合。因此当应用系统发出调用与数据源进行连接时，数据库驱动器能管理通信协议。当建立起与数据源的连接时，数据库驱动器便能处理应用系统向DBMS发出的请求，对分析或发自数据源的设计进行必要的翻译，并将结果返回给应用系统。 2．JDBC的诞生 自从Java语言于1995年5月正式公布以来，Java风靡全球。出现大量的用java语言编写的程序，其中也包括数据库应用程序。由于没有一个Java语言的API，编程人员不得不在Java程序中加入C语言的ODBC函数调用。这就使很多Java的优秀特性无法充分发挥，比如平台无关性、面向对象特性等。随着越来越多的编程人员对Java语言的日益喜爱，越来越多的公司在Java程序开发上投入的精力日益增加，对java语言接口的访问数据库的API 的要求越来越强烈。也由于ODBC的有其不足之处，比如它并不容易使用，没有面向对象的特性等等，SUN公司决定开发一Java语言为接口的数据库应用程序开发接口。在JDK1．x 版本中，JDBC只是一个可选部件，到了JDK1．1公布时，SQL类包（也就是JDBCAPI）
华北电力大学科技学院 毕业设计（论文）附件 外文文献翻译 学号：121912020115姓名：彭钰钊 所在系别：动力工程系专业班级：测控技术与仪器12K1指导教师：李冰 原文标题：Infrared Remote Control System Abstract 2016 年 4 月 19 日
红外遥控系统 摘要 红外数据通信技术是目前在世界范围内被广泛使用的一种无线连接技术，被众多的硬件和软件平台所支持。红外收发器产品具有成本低，小型化，传输速率快，点对点安全传输，不受电磁干扰等特点，可以实现信息在不同产品之间快速、方便、安全地交换与传送，在短距离无线传输方面拥有十分明显的优势。红外遥控收发系统的设计在具有很高的实用价值，目前红外收发器产品在可携式产品中的应用潜力很大。全世界约有1亿5千万台设备采用红外技术，在电子产品和工业设备、医疗设备等领域广泛使用。绝大多数笔记本电脑和手机都配置红外收发器接口。随着红外数据传输技术更加成熟、成本下降，红外收发器在短距离通讯领域必将得到更广泛的应用。 本系统的设计目的是用红外线作为传输媒质来传输用户的操作信息并由接收电路解调出原始信号，主要用到编码芯片和解码芯片对信号进行调制与解调，其中编码芯片用的是台湾生产的PT2262，解码芯片是PT2272。主要工作原理是：利用编码键盘可以为PT2262提供的输入信息，PT2262对输入的信息进行编码并加载到38KHZ的载波上并调制红外发射二极管并辐射到空间，然后再由接收系统接收到发射的信号并解调出原始信息，由PT2272对原信号进行解码以驱动相应的电路完成用户的操作要求。 关键字：红外线；编码；解码；LM386；红外收发器。 1 绪论
外文翻译： 会计081班顾洁芳0804002244 Stock:Expected and unexpected return To begin, for concreteness, we consider the return on the stock of a company called Flyers. What will determine this stock’s return in, say, the coming year? The return on any stock traded in a financial market is composed of two parts. First, the normal, or expected, return from the stock is the part of the return that shareholders in the market predict or expect. This return depends on the information shareholders have that bears on the stock, and it is based on the market’s understanding today of the important factors that will influence the stock in the coming year. The second part of the return on the stock is the uncertain, or risky, part. This is the portion that comes from unexpected information revealed within the year. A list of all possible sources of such information would be endless, bet here are a few examples: News about Flyers research Government figures released on gross domestic product (GDP) The results from the latest arms control talks The news that Flyers’s sales figures are higher tan expected A sudden, unexpected drop in interest rates Based on this discussion, one way to express the return on Flyers stock in the coming year would be: Total return = expected return + unexpected return R = E (R) + U Where R stands for the actual total return in the year, E(R) stands for the expected part of the return, and U stands for the unexpected part of the return. What this says is that the actual return, R, differs from the expected return, E(R), because of surprises that occur during the year. In any given year, the unexpected return will be positive or negative, but, through time, the average value of U will be zero. This simply means that on average, the actual return equals the expected return. Risk: systematic and unsystematic The unanticipated part of the return, that portion resulting from surprises, is the true risk of any investment. After all, if we always receive exactly what we expect, then the investment is perfectly predictable and by definition, risk-free. In other words, the risk of owning an asset comes from surprises-unanticipated events. There are important differences, though, among various sources of risk. Look back at our previous list of news stories. Some of these stories are directed specifically at Flyers, and some are more general. Which of the news items are of specific importance to Flyers? Announcements about interest rates or GDP are clearly important for nearly all companies, whereas the news about Flyers’s president, its research, or its sales is of specific interest to Flyers. We will distinguish between these
外文资料 Numerical Control One of the most fundamental concepts in the area of advanced manufacturing technol-ogies is Numerical Control(NC). Prior to the advent of NC, all machine tools were manually operated and controlled. Among the many limitations associated with manual control machine tools. Perhaps none is more prominent than the limitation of operator skills. With manual control, the quality of the product are directly related to and limited to the skills of the operator. Numerical Control represented the first major step away from human control of machine tools. Numerical Control means the control of machine tools and other manufacturing systems through the use of prerecorded, written symbolic instructions. Rather than operating a machine tool. For a machine tool to be numerically controlled, it must be interfaced with a device for accepting and decoding the programmed instructions, known as a reader. Numerical Control was developed to overcome the limitation of human operators, and it has done so. Numerical Control machines are more accurate than manually operated machines,they can produce parts more uniformly, they are faster, and the long-run tooling costs are lower. The development of NC led to the development of several other innovations in manufacturing technology: (1) Electrical discharge machining. (2) Laser cutting. (3) Electron beam welding. Numerical Control has also made machine tools more versatile than their manually operated predecessors. An NC machine tool can automatically produce a wide variety of parts, each involving an assortment of widely varied and comples machining processes. Numerical Control has allowed manufacturers to undertake the production of products that would not have been feasible from an economic perspective using manually controlled machine tools and processes.
外文翻译 专业机械设计制造及其自动化学生姓名刘链柱 班级机制111 学号1110101102 指导教师葛友华
外文资料名称： Design and performance evaluation of vacuum cleaners using cyclone technology 外文资料出处：Korean J. Chem. Eng., 23(6), (用外文写) 925-930 (2006) 附件： 1.外文资料翻译译文 2.外文原文
应用旋风技术真空吸尘器的设计和性能介绍 吉尔泰金，洪城铱昌，宰瑾李， 刘链柱译 摘要：旋风型分离器技术用于真空吸尘器 - 轴向进流旋风和切向进气道流旋风有效地收集粉尘和降低压力降已被实验研究。优化设计等因素作为集尘效率，压降，并切成尺寸被粒度对应于分级收集的50％的效率进行了研究。颗粒切成大小降低入口面积，体直径，减小涡取景器直径的旋风。切向入口的双流量气旋具有良好的性能考虑的350毫米汞柱的低压降和为1.5μm的质量中位直径在1米3的流量的截止尺寸。一使用切向入口的双流量旋风吸尘器示出了势是一种有效的方法，用于收集在家庭中产生的粉尘。 摘要及关键词：吸尘器; 粉尘; 旋风分离器 引言 我们这个时代的很大一部分都花在了房子，工作场所，或其他建筑，因此，室内空间应该是既舒适情绪和卫生。但室内空气中含有超过室外空气因气密性的二次污染物，毒物，食品气味。这是通过使用产生在建筑中的新材料和设备。真空吸尘器为代表的家电去除有害物质从地板到地毯所用的商用真空吸尘器房子由纸过滤，预过滤器和排气过滤器通过洁净的空气排放到大气中。虽然真空吸尘器是方便在使用中，吸入压力下降说唱空转成比例地清洗的时间，以及纸过滤器也应定期更换，由于压力下降，气味和细菌通过纸过滤器内的残留粉尘。 图1示出了大气气溶胶的粒度分布通常是双峰形，在粗颗粒（>2.0微米）模式为主要的外部来源，如风吹尘，海盐喷雾，火山，从工厂直接排放和车辆废气排放，以及那些在细颗粒模式包括燃烧或光化学反应。表1显示模式，典型的大气航空的直径和质量浓度溶胶被许多研究者测量。精细模式在0.18?0.36 在5.7到25微米尺寸范围微米尺寸范围。质量浓度为2?205微克，可直接在大气气溶胶和 3.85至36.3μg/m3柴油气溶胶。
译文（一） THE ACCOUNTING REVIEW V ol. 83, No. 3 2008 pp. 823–853 市场参与者的杜邦分析的使用 马克?t?Soliman 华盛顿大学 文摘:杜邦分析,一种常见的财务报表分析，依靠于净营业资产收益率的两个乘法组件:利润率和资产周转率。这两个会计比率衡量不同的构造。因此,有不同的属性。之前的研究已经发现,资产周转率的变化是未来收益的变化正相关。本文全面探讨了杜邦组件和沿着三个维度有助于文学。首先,本文有助于财务报表分析文献,发现在这个会计信息信号实际上是增量学习会计信号在先前的研究在预测未来收益。其次,它有助于文学在股票市场上使用的会计信息通过检查眼前和未来的股本回报投资者应对这些组件。最后,它增加了分析师的文献处理会计信息的再次测试直接和延迟反应的分析师通过同期预测修正以及未来预测错误。一致的跨市场加入者的两组,结果表明是有用的信息就是明证杜邦组件和股票收益之间的联系以及维度分析师预测。然而,我发现预测未来预测错误和异常返回信息处理表明似乎没有完成。平均水平,分析表明杜邦组件代表增量和可行的操作特征信息的公司。 关键词:财务报表分析、杜邦分析、市场回报、分析师预估。 数据可用性:在这项研究中使用的数据是公开的来源显示的文本。 在本文中,我分析杜邦分析中包含的信息是否与股市回报相关和分析师预测。之前的研究文档组件从杜邦分析,分解的净营业资产收益率为利润率和资产周转率,有解释力对未来盈利能力的变化。本文增加了文献综合研究投资者和分析师反应杜邦组件三个维度。首先,它复制先前记录的预测能力和检查是否健壮和增量其他预测已经考虑在文学的存在。其次,它探讨了使用这些组件的股市投资者通过观察同生和未来收益。在同时代的长窗协会和短时期限信息测试,结果显示积极联系杜邦组件和股本回报率。但小未来异常返回交易策略显示的信息可能不完整的处理。最后,检查当前预测修正由卖方分析师和未来的预测错误。尽管他们似乎修改他们的预测未来收益与这些杜邦组件中的信息一致,修订似乎不完整就是明证可预测的未来预测错误。一致的市场参与者,在两组同期结果表明,信息是有用的,但是未来的测试表明,信息处理似乎没有完成。 由金矿和笔者(2001)提供了一个使用剩余收益的股票估值方法框架,给出了一个简单的财务比率分析的直接映射到股票估值。特别是他们用杜邦分析,分解公司的净营业资产收益率(RNOA)利润率(PM)和资产周转率(ATO)点的地方1。PM和ATO会计信号,测量不同结构对一个公司的业务2。PM 往往是来自定价权,如产品创新,产品定位,品牌知名度,先发优势和市场定位。ATO措施资产利用率和效率,通常来自于有效的利用财产,工厂和设备,有效的库存流程;和其他形式的资本管理工作3。 我们有理由期待竞争力量的影响这两个来源盈利能力不同。大的利润率通常吸引新进入者进入市场或快速模仿新思想从现有的竞争对手。由此产生的竞争导致高利润率回归正常水平,暗示更多暂时的利益。与利润不同,然而,竞争可能少威胁要部署一个有效的资产。更难以模仿另一个公司的高效生产流程因为这样模仿通常包括大型和昂贵的改革目前的工厂和操作。 1.具体来说,RNOA营业收入/平均净营业资产,PM营业收入/销售和ATO销售 /平均净营业资产。此后,点和ATO被称为“杜邦公司组成”。另一个常见的形式是分解罗伊(利润杠杆资产周转率)或(NI /产品销售/资产资产/股本)。讨论的“估值理论和RNOA”部分,我在分析使用RNOA为了专注于操作,因此抽象从公司的融资决策。 2.例如,阿伯克龙比和惠誉赚取高额利润通过出售used-looking服装被认为是时髦和青少年所要
毕业论文外文文献翻译 毕业设计（论文）题目关于企业内部环境绩效审计的研究翻译题目最高审计机关的环境审计活动 学院会计学院 专业会计学 姓名张军芳 班级09020615 学号09027927 指导教师何瑞雄
最高审计机关的环境审计活动 1最高审计机关越来越多的活跃在环境审计领域。特别是1993-1996年期间，工作组已检测到环境审计活动坚定的数量增长。首先，越来越多的最高审计机关已经活跃在这个领域。其次是积极的最高审计机关，甚至变得更加活跃：他们分配较大部分的审计资源给这类工作，同时出版更多环保审计报告。表1显示了平均数字。然而，这里是机构间差异较大。例如，环境报告的数量变化，每个审计机关从1到36份报告不等。 1996-1999年期间，结果是不那么容易诠释。第一，活跃在环境审计领域的最高审计机关数量并没有太大变化。“活性基团”的组成没有保持相同的：一些最高审计机关进入，而其他最高审计机关离开了团队。环境审计花费的时间量略有增加。二，但是，审计报告数量略有下降，1996年和1999年之间。这些数字可能反映了从量到质的转变。这个信号解释了在过去三年从规律性审计到绩效审计的转变（1994-1996年，20％的规律性审计和44％绩效审计;1997-1999：16％规律性审计和绩效审计54％）。在一般情况下，绩效审计需要更多的资源。我们必须认识到审计的范围可能急剧变化。在将来，再将来开发一些其他方式去测算人们工作量而不是计算通过花费的时间和发表的报告会是很有趣的。 在2000年，有62个响应了最高审计机关并向工作组提供了更详细的关于他们自1997年以来公布的工作信息。在1997-1999年，这62个最高审计机关公布的560个环境审计报告。当然，这些报告反映了一个庞大的身躯，可用于其他机构的经验。环境审计报告的参考书目可在网站上的最高审计机关国际组织的工作组看到。这里这个信息是用来给最高审计机关的审计工作的内容更多一些洞察。 自1997年以来，少数环境审计是规律性审计（560篇报告中有87篇，占16％）。大多数审计绩效审计（560篇报告中有304篇，占54％），或组合的规律性和绩效审计（560篇报告中有169篇，占30％）。如前文所述，绩效审计是一个广泛的概念。在实践中，绩效审计往往集中于环保计划的实施（560篇报告中有264篇，占47％），符合国家环保法律，法规的，由政府部门，部委和/或其他机构的任务给访问（560篇报告中有212篇，占38％）。此外，审计经常被列入政府的环境管理系统（560篇报告中有156篇，占28％）。下面的元素得到了关注审计报告：影响或影响现有的国家环境计划非环保项目对环境的影响;环境政策;由政府遵守国际义务和承诺的10％至20％。许多绩效审计包括以上提到的要素之一。 1本文译自：S. Van Leeuwen.(2004).’’Developments in Environmental Auditing by Supreme Audit Institutions’’ Environmental Management Vol. 33, No. 2, pp. 163–1721
附录 Abstract: Programmable controller in the field of industrial control applications, and PLC in the application process, to ensure normal operation should be noted that a series of questions, and give some reasonable suggestions. Key words: PLC Industrial Control Interference Wiring Ground Proposal Description Over the years, programmable logic controller (hereinafter referred to as PLC) from its production to the present, to achieve a connection to the storage logical leap of logic; its function from weak to strong, to achieve a logic control to digital control of progress; its applications from small to large, simple controls to achieve a single device to qualified motion control, process control and distributed control across the various tasks. PLC today in dealing with analog, digital computing, human-machine interface and the network have been a substantial increase in the capacity to become the mainstream of the field of control of industrial control equipment, in all walks of life playing an increasingly important role. ⅡPLC application areas Currently, PLC has been widely used in domestic and foreign steel, petroleum, chemical, power, building materials, machinery manufacturing, automobile, textile, transportation, environmental and cultural entertainment and other industries, the use of mainly divided into the following categories: 1. Binary logic control Replace traditional relay circuit, logic control, sequential control, can be used to control a single device can also be used for multi-cluster control and automation lines. Such as injection molding machine, printing machine, stapler machine, lathe, grinding machines, packaging lines, plating lines and so on. 2. Industrial Process Control In the industrial production process, there are some, such as temperature, pressure, flow, level and speed, the amount of continuous change (ie, analog), PLC using the appropriate A / D and D / A converter module, and a variety of control algorithm program to handle analog, complete closed-loop control. PID closed loop control system adjustment is generally used as a conditioning method was more. Process control in metallurgy, chemical industry, heat treatment, boiler control and so forth have a very wide range of applications 3. Motion Control PLC can be used in a circular motion or linear motion control. Generally use a dedicated motion control module, for example a stepper motor or servo motor driven single-axis or multi-axis position control module, used in a variety of machinery, machine tools, robots, elevators and other occasions. 4. Data Processing PLC with mathematics (including matrix operations, functions, operation, logic operation), data transfer, data conversion, sorting, look-up table, bit manipulation functions, you can complete the data collection, analysis and processing.Data
文献出处：Bedard J C, Hoitash R, et al. The development of the enterprise risk management theory [J]. Contemporary Accounting Research, 2014, 30(4): 64-95. （声明：本译文归百度文库所有，完整译文请到百度文库。） 原文 The development of the enterprise risk management theory Bedard J C, Hoitash R Abstract Enterprise risk management as an important field of risk management disciplines, in more than 50 years of development process of the implementation of dispersing from multiple areas of research to the integration of comprehensive risk management framework evolution, the theory of risk management and internal audit and control theory are two major theoretical sources of risk management theory has experienced from the traditional risk management, financial volatility to the development of the enterprise risk management, risk management and internal audit and control theory went through the internal accounting control and internal control integrated framework to the evolution of enterprise risk management, the development of the theory of the above two points to the direction of the enterprise risk management, finally realizes the integration development, enterprise risk management theory to become an important part of enterprise management is indispensable. Keywords: enterprise risk management, internal audit the internal control 1 The first theory source, evolution of the theory of risk management "Risk management" as a kind of operation and management idea, has a long history: thousands of years ago in the west have "don't put all eggs in one basket" the proverb, the ancient Chinese famous "product valley hunger" allusions and "yicang ("
毕业设计（论文） 外文翻译 题目西安市水源工程中的 水电站设计 专业水利水电工程 班级 学生 指导教师 2016年
研究钢弧形闸门的动态稳定性 牛志国 河海大学水利水电工程学院，中国南京，邮编210098 nzg_197901@https://www.doczj.com/doc/2b9814221.html,，niuzhiguo@https://www.doczj.com/doc/2b9814221.html, 李同春 河海大学水利水电工程学院，中国南京，邮编210098 ltchhu@https://www.doczj.com/doc/2b9814221.html, 摘要 由于钢弧形闸门的结构特征和弹力，调查对参数共振的弧形闸门的臂一直是研究领域的热点话题弧形弧形闸门的动力稳定性。在这个论文中，简化空间框架作为分析模型，根据弹性体薄壁结构的扰动方程和梁单元模型和薄壁结构的梁单元模型，动态不稳定区域的弧形闸门可以通过有限元的方法，应用有限元的方法计算动态不稳定性的主要区域的弧形弧形闸门工作。此外，结合物理和数值模型，对识别新方法的参数共振钢弧形闸门提出了调查，本文不仅是重要的改进弧形闸门的参数振动的计算方法，但也为进一步研究弧形弧形闸门结构的动态稳定性打下了坚实的基础。 简介 低举升力，没有门槽，好流型，和操作方便等优点，使钢弧形闸门已经广泛应用于水工建筑物。弧形闸门的结构特点是液压完全作用于弧形闸门，通过门叶和主大梁，所以弧形闸门臂是主要的组件确保弧形闸门安全操作。如果周期性轴向载荷作用于手臂，手臂的不稳定是在一定条件下可能发生。调查指出:在弧形闸门的20次事故中，除了极特殊的破坏情况下，弧形闸门的破坏的原因是弧形闸门臂的不稳定;此外，明显的动态作用下发生破坏。例如:张山闸，位于中国的江苏省，包括36个弧形闸门。当一个弧形闸门打开放水时，门被破坏了，而其他弧形闸门则关闭，受到静态静水压力仍然是一样的，很明显，一个动态的加载是造成的弧形闸门破坏一个主要因素。因此弧形闸门臂的动态不稳定是造成弧形闸门(特别是低水头的弧形闸门)破坏的主要原是毫无疑问。
A Case Study of Pattern-based Software Framework to Improve the Quality of Software Development Chih-Hung Chang, Chih-Wei Lu Dept. of Information Management, Hsiuping Institute of Technology No.11, Gongye Rd., Dali City, Taichung County, Taiwan(R.O.C.) 886-4-24961123 ext 3112 {chchang,cwlu}@ https://www.doczj.com/doc/2b9814221.html,.tw William C. Chu Dept. of Computer Science and Information Engineering, Tunghai University No.181, Sec. 3, Taichung Port Rd.,Taichung City, Taiwan (R.O.C.) 886-4-23508983 cchu@https://www.doczj.com/doc/2b9814221.html,.tw Nien-Lin Hsueh Dept. of Information Engineering and Computer Science, Feng Chia University No. 100 Wenhwa Rd., Taichung, Taiwan (R.O.C.) 886-4- 24517250 ext 3773 nlhsueh@https://www.doczj.com/doc/2b9814221.html,.tw Chorng-Shiuh Koong Dept. of Computer and Information Science, Taichung University No.140, Ming-Sheng Rd., Taichung City, Taiwan (R.O.C.) 886-4-22183804 csko@https://www.doczj.com/doc/2b9814221.html,.tw ABSTRACT In recent years, development of the software industry and demand for software systems have increased rapidly, but developers often does not know whose suggestion to follow regarding methodologies of software engineering. One reason for that is the difficulty in applying new software engineering technologies. Developers take a long time to train. Another reason is the difficulty in integrating CASE toolsets. So many indeterminate factors make the development process more and more complex. On the other hand, software development is too customized, and software reuse is difficult. T he reasons above are the cause for software development and maintenance to become more complex and difficult to control. In this paper we explore the importation of a software pattern-based framework, and the development of an ERP/support chain system. Based on software patterns, developers can separate development and business so as to reduce problems caused by the developer’s lack of business experience. T he quality of the product can thus be enhanced, software development costs be reduced, and software maintenance be improved. Keywords Design Pattern, Framework, Software Development Process, XML 1.INTRODUCTION In Object-Oriented T echnology, the property of inheritance allows software components to be reused, which can obviously reduce the cost of software development. For this reason, to produce a highly reusable software component is an important goal of software engineering. However, programmers are usually focused on code reuse while ignoring design reuse. Design patterns provide a clear concept of design structure by describing the relationships of inheritance and reference between components of the system. Design patterns are a series of familiar usages and constructions utilized throughout system design. Design patterns allow rapid coding of certain components by following certain patterns of steps. T his can improve the documentation and maintenance of existing systems by providing an explicit specification of class, object interactions and their underlying intents. One of the main purposes of design patterns is to help software engineers to understand the common characteristics of software objects/components in specialized domain. In recent years, due to the development and maturation of WWW and Java [14] technologies, many applications are now web applications or leaning in that direction. Many software concepts are utilized for the web as well, such as Design Patterns and Frameworks. The Apache Struts [12] and Spring Framework [13] are both open source frameworks used to address and reduce the complexity of developing an enterprise application. T he advantage of using a framework is the layered architecture it provides. Layered architecture allowed users to choose the component desired, while also providing the integration framework when developing application using J2EE. T hese developing web concepts can facilitate the development of web applications. However, these very useful tools and concepts lack a systematic organization. We hope to use these open source software technologies to develop a software framework which can be applied to web application. T his should solve the problem of web applications lacking a good structure, while through applying these open source software technologies, software development costs will be reduced. Furthermore, a guideline for programmers who wants to use these open source technologies will be provided. This paper is organized as follows: In the next section, we discuss works related to our project; in section 3, the open source technologies used in the paper and the system implementation will be described; Section 4 is a sample experiment. T he conclusion is given in section 5.