The measurement of the surveying and mapping in mine
Since the seventy s, as the electronic technology and laser technology development, the type of surveying and mapping instruments with electronics (such as range finder, electronic tachometer, gyroscopes) to the traditional surveying and mapping instruments methods produced profound effect. In satellite remote sensing, global positioning system, as a representative of the space on earth observation technology in surveying and mapping application in the science of mature, computer technology, system scientifically based geographic information system and application for the emergence of surveying and mapping information source of access, analyze, management, processing and application fully provide strong technical support, automation and intelligence of surveying and mapping system is already in investigation, therefore we can say, the modern mapping technology is undergoing a profound revolution. Mining of measuring technology of an important application field, in the vast coal, metal mines, nonferrous mine production process played an important role. Mine survey of modern task is: in mine exploration, design, development and production of the different stages of the operation of the ground and underground mining area, the space, resources, (in mineral and land resources and environment are mainly) information acquisition, storage, processing, display and use for reasonable and effective development resources, protecting the resources, protecting the environment, management, industrial and environmental services for the continuous development of the station. In order to realize its modern task, mine measurement must be making full use of modern surveying and mapping instruments and techniques, put the advanced modern technology with mine surveying the actual work, specific characteristics, and the combination of broaden the living space mine survey and business scope, promote the reform and development of mine survey, adapt to the market economy system and mining system reform needs. Electronic tachometer, space information technology, the inertial measurement system and other modern surveying and mapping instruments have been in mine survey technology is used to further development and are constantly.
This paper to modern surveying and mapping instruments of the development of the technology and its application in mine.
1、Electronic tachometer and its application in mine survey:
Electronic tachometer as the most widely used surveying and mapping instruments, is electronic technology and optical technology development of the combination of the photoelectric measuring instrument, is also set range finder, electronic advantages in a wide range of instruments, application prospects, the intelligent electronic tachometer is currently the biggest selling surveying and mapping instruments, is also the main future development direction. Intelligent electronic tachometer is with light, electricity and magnetism, machine of the latest scientific achievements, set the location, measuring Angle for the integration of advanced instrument. The international advanced electronic tachometer are on a memory card, internal memory or electronic hand book way, way of double record data transmission communication function, can receive external computer instruction by the computer input data, also can to outside the computer output data. The international advanced electronic tachometer have Japanese SOKKIA POWERSET series production of electronic tachometer and SET5F, SET6F, SET5W electronic tachometer, Swiss produces the TCA100 and TCA1800 electronic tachometer, Japan NIKON DTM-A series of electronic tachometer, etc. Our country has just south of the surveying and mapping instruments company production NTS-200 series electronic tachometer. Electronic tachometer has set up a file in the engineering survey, mine surveying, cadastral etc a wide range of applications, its development and application is in rapid developing. Electronic tachometer because and has the advantages of transit and range finder, and provide measurement results in digital form, its simple operation, stable performance, data can be through the electronic hand book and the computer to carry on the advantages of communication in the mine in the measurement of a wide range of applications. The ground control survey, topographic, engineering surveying all available is, contact measurement, the measurement work can also be used inunderground i To as a representative of the intelligent, digital instrument is minesurveying instrument one of the development direction in the future. Based on theelectronic tachometer and the modern computer technology can establish a mine 3 d data to be automatic collection, transmission,processing of mine surveying dataprocessing system, instead of traditional hand book records, manual entry,
detailed calculation of repetitive work. In addition, electronic tachometer in mine surfacemovement monitoring, land reclamation project implementation, mine construction aspects also have been applied, each big ore measurement organizations are to instead of traditional instruments for routine measure the work, not only improves the efficiency, picked up speed, and reduced the development, and to ensure the accuracy
2、Space information technology and its application in the measurement of the mine.
The core of spatial information technology and the subject is the "3 S" technology (Remote Sensing:RS)、 (Global Positioning System GPS)、 (Grographic Information System：GIS) Remote sensing including satellite remote sensing and remote sensing, remote sensing data topographic map surveying as the important means in practice has a wide range of applications, satellite remote sensing for mapping is also mine of study and has made some significant results, based on remote sensing data to build digital terrain model (DTM) and then used in surveying and mapping work has won more applications. GPS as a cause of surveying and mapping in the traditional concept of major change technology, has become a main technology of land measurement method, also is the most potential mobile technology, in mine measurement, control survey, project survey, environment monitoring, disaster prevention and reduction of the navigation transport plays a significant role. Because not only have all-weather GPS, high precision and high flexibility, and the advantages of the traditional measuring technology without strict control, compared the level measurement, don't take points between depending on the point, without the need to build standard, there is no error accumulation, the three dimensional positioning etc, and in the field measurement model, error sources and data processing to the traditional concept of surveying and mapping is a revolutionary change. The geographic information system as the geographical distribution of space of therelevant data collecting, processing, management, analysis of computer technology system, and its development and application of surveying and mapping the development of science is of great significance, is the modern mapping technology of important technical support. With "3 S" integration or integrated as the leading
technology of space information system has gradually become the surveying and mapping learning or the earth informat ics new technology system and the work pattern, its advanced nature, timeliness obvious. With the space information technology for technical support, modern surveying and mapping instruments, technology is in rapid development in. The measurement of the remote sensing technology in the mines application has experienced a long time, and has accumulated rich experience.
For remote sensing, it can be used as remote sensing data mining on the data topographic map surveying data source, like a piece of correction, through visual interpretation, field adjustable draw the work, complete the topographic map surveying and mapping. Compared with the traditional mapping method, using remote sensing data of mapping speed, low cost, high precision, it is a kind of application very extensive mapping method. Remote sensing in mine measurement of the applications of the key theory and technology also is in the investigation. Application of remote sensing data mining area, can obtain real-time, dynamic and comprehensive information source, to the mining area environment monitoring of the mining area environment protection to provide decision support. Remote sensing data mining area for prospecting, geological conditions, roof and floor of coal seam in such aspects as research has been applied, all these, explains the application of remote sensing technique in mining measurement is mine surveying realize its modern task important guarantee. GPS technology in the measurement of the mine is mainly applied to replace traditional ground surveying and mapping work. Using GPS technology such as mining surface movement monitoring, hydrology monitoring, mining area control elevation hole net establishment or measure, reform, GPS receiver with performance to price has been rising, and its application in the measurement of mine work the ground has become a part of the modern mine survey is an important support technology. Used in mining area the geographic information system is for mine geographical information system, or called mine material source environment alinformation system (MRIES). MREIS has become the important developing direction mine survey. With mining area environment resources information system as a platform to all kinds of measurement techniques for data acquisition approach, can build a
collection of data acquisition, processing, management, analysis and output in one
of the automation, intelligent technology system, as the sustainable development
of mining decision support system. Mine survey MREIS work is to establish the fist
work, and to create a MREIS mine surveying is an inevitable trend. Therefore, the
GPS in the mining area is first applied used in a mine measurement information system established measurement, and then based on this establish the mining area environment information system resources. Space information technology is mine surveying realize its modern task of important technical support and guarantee, "3
S" technology and other measuring instrument technology on the basis of the organic combination of the mining area environment information system is the spatial data information technology in mine survey of the applications of the comprehensive
results.
3 .the inertial measurement system and its application in the measurement of
the mine
The inertial measurement system (Inertial ISS) is a kind of navigation and positioning technology, have all-w, autonomous, fast can flexible and advantages,
the earth measurement, engineering surveying and mining measure the work of automation and versatility provided another kind of new technology. It is to use
the principle of inertial navigation, and earn geodetic data (longitude and latitude, elevation, azimuth, gravity anomaly and vertical deflection, etc.) of a kind of technology system.
ISS can be divided into two categories: platform utility system and type
system in the field of surveying and mapping, ISS main application target includes: (1) control measure, such as the existing control point review, encryption, and
aerial control, etc.; (2) pipeline monitoring, orientation, crustal deformation,
the surface subsidence observation; (3) underground positioning, all kinds of engineering and construction measure; (4) earthquake, gravity survey, geophysical research; (5) shaft and cans of vertical way beam of monitoring, etc. GPS/ISS combination system is to meet high precision navigation and positioning of the development direction of the request. This combination system can make the GPS and
the performance of theISS, can get a lot of complementary to the whole land
measurement model dataprocessing, and make sure that 3 d coordinate and the positioning and the precision of the navigation unstable, and increased significantly. The inertial measurement system in mine to the measurement of the Lord is applied in application in themeasurement of the application, the activities of the underground measurement, and of course the ground also has been applied in many fields, such as stated above. ISS in mines in China, the application in the measurement of work is to carry out in-depth,continue to develop. With GPS + ISS combination system used in mines measurement is a promising a technologyFour other new technology in the new instrument of surveying and mapping application to the measurement of the mineOther modern surveying and mapping instruments, such as laser point to meter, the gyro th, digital levels and related technology are all mine surveying and mapping measurement is used, and with the instrument technology as the foundation, formed many mining measurement instrument, as mine survey for the application of modern instruments and techniques.
Mine survey as a cross subject, the development and the progress and the mining technology and the development of the mining project, measuring instruments and equipment of science and technology and the development of other subjects like mathematical science, computer science, etc, the development are closely related. Modern mapping technology is based on the electronic technology, space technology, optical technology, computer technology based on comprehensive technology, and has the intelligence, automation and so on a series of advantages. Modern science and technology, the rapid development of surveying and mapping can surely promote the further development of mine survey. With modern technology, mining engineering surveying and mapping technology and related science and technology as the foundation, the mine survey will form and collect data acquisition, processing, management, transmission, analysis, expression, application, output for the integration of intelligence, automation technology system for mine resources, environmental information system establishment provide fundamental material, promoting mine sustainable development.
测绘在矿山测量中的发展
七十年代以来，随着电子技术和激光技术的发展，光电结合型的测绘仪器(如测距仪、全站仪、陀螺仪)对传统的测绘仪器方法产生了深刻的影响。以卫星遥感、全球定位系统为代表的空间对地观测技术在测绘科学中的应用日趋成熟，以计算机技术、系统科学为基础的地理信息系统的出现和应用为多源测绘信息的获取、分析、管理、处理及其充分应用提供了有力的技术支持，自动化、智能化的测绘系统已处于研究之中，因此可以说，现代测绘技术正在经历着一场深刻的革命。矿山测量技术的一个重要应用领域，在广大的煤矿、金属矿山、有色矿山等的生产过程中发挥着重要的作用。矿山测量的现代任务是：在矿山勘探、设计、开发和生产运营的各个阶段，对矿区地面和地下的空间、资源、(以矿产和土地资源为主)和环境信息进行采集、存储、处理、显示、利用，为合理、有效地开发资源、保护资源、保护环境、治理环境服务，为工矿区的持续发展报务。为了实现其现代任务，矿山测量必须充分应用现代测绘仪器和技术，将先进的现代技术同矿山测量的实际工作、具体特点相结合，拓宽矿山测量的生存空间和业务范围，促进矿山测量的改革和发展，适应市场经济体制和矿山体制改革的需要。全站仪、空间信息技术、惯性测量系统等现代测绘仪器技术均已在矿山测量中得到了应用并正在不断向纵深发展。为此本文对现代测绘仪器技术的发展及其在矿山测量的应用进行系统的分析和研究，以使矿山测量更好地服务于矿山可持续发展。
现代测绘仪器、技术及其在矿山测量中的应用：
1 全站仪及其在矿山测量中的应用：
全站仪作为当前应用最为广泛的测绘仪器，是电子技术与光学技术发展结合的光电测量仪器，也是集测距仪、电子经纬仪的优点于一体的、应用前途广泛的仪器，智能化的全站仪是目前销量最大的测绘仪器，也是今后发展的主要方向。智能型全站仪是集光、电、磁、机的最新科学成果，集测距、测角为一体的先进仪器。国际上先进的全站仪均以存储卡、内部存储器或电子手簿的方式记录数据，具有双路传输的通讯功能，能接收外部计算机的指令，由计算机输入数据，也能向外部计算机输出数据。目前国际上较先进的全站仪有日本SOKKIA 生产的POWERSET系列全站仪及其SET5F、SET6F、SET5W全站仪，瑞士Leica公司生产的ＴCA100及TCA1800全站仪，日本NIKON的DTM-A系列全站仪等。我国目前仅有南方测绘仪器公司生产的NTS-200系列全站仪。全站仪已在工程测量、矿山测量、地籍测量等领域得到了广泛的应用，其发展及应用正处在飞速发展之中。全站仪由于兼具有经纬仪和测距仪的优点，且以数字形式提供测量成果，其操作简便、性能稳定、数据可通过电子手簿与计算机进行通讯等优点使其在矿山测量中得到了广泛的应用。地面控制测量、地形测量、工程测量均可利用全站仪进行，联系测量、井下测量工作也可用全站仪进行。以全站仪为代表的智能化、数
字化仪器是矿山测量仪器今后的发展方向之一。基于全站仪和现代计算机技术可建立矿山三维数据自动采集、传输、处理的矿山测量数据处理系统，取代传统的手簿记录、手工录入、繁琐计算等大量的重复性的工作。此外，全站仪在矿山地表移动监测、矿区土地复垦工程实施、矿区施工等方面也都得到应用，各大矿的测量机构正在以全站仪取代传统的仪器进行日常的测量工作，既提高了效益，加快了速度，又减少了开发，保证了精度。
2 空间信息技术及其在矿山测量中的应用：
空间信息技术的核心和主体是“3S”技术，即遥感(Remote Sensing：RS)、全球定位系统(Global Positioning System: GPS)、地理信息系统(Grographic Information System：GIS)。遥感包括卫星遥感和航空遥感，航空遥感作为地形图测绘的重要手段已在实践中得到了广泛的应用，卫星遥感用于测图也正在矿究之中并已取得一些意义重大的成果，基于遥感资料建立数字地面模型(DTM)进而应用于测绘工作已获得了较多的应用。GPS作为一项引起传统测绘观念重大变革的技术，已经成为大地测量的主要技术手段，也是最具潜力的全能型技术，在矿山测量、控制测量、工程测量、环境监测、防灾减灾以及交通运输工具的导航方面发挥着重要的作用。由于GPS不仅具有全天候、高精度和高度灵活性的优点，而且与传统的测量技术相比，无严格的控制测量等级之分，不必考虑测点间通视，不需造标，不存在误差积累，可同时进行三维定位等优点，在外业测量模式、误差来源和数据处理方面是对传统测绘观念的革命性转变。地理信息系统作为对空间地理分布有关的数据进行采集、处理、管理、分析的计算机技术系统，其发展和应用对测绘科学的发展意义重大，是现代测绘技术的重大技术支撑。以“3S”一体化或集成为主导的空间信息技术体系已逐渐成为测绘学或地球信息学(Geoinformatics或Geomatics)新的技术体系和工作模式，其先进性、时效性明显。以空间信息技术为技术支撑，现代测绘仪器、技术正处于快速的发展之中。遥感技术在矿山测量中的应用已经历了较长的时间，并积累了丰富的经验。对于航空遥感来说，航空遥感资料可作为进行矿区地形图测绘的资料源，通过象片校正、目视判读、野外调绘等工作，完成地形图的测绘。较之传统的测图方法，利用遥感资料进行测图速度快、成本低、精度高，是一种应用极为广泛的测图方法。航天遥感在矿山测量中应用的关键理论与技术也正处于研究之中。应用遥感资料，可获取矿区实时、动态、综合的信息源，对矿区环境进行监测，为矿区环境保护提供决策支持。遥感资料用于找矿、矿区地质条件研究、煤层顶底板研究等方面都已得到应用，所有这些，都说明遥感技术应用于矿山测量是矿山测量实现其现代任务的重要保证。GPS技术在矿山测量中的应用主要是取代传统的地面测绘工作。如利用GPS技术进行矿区地表移动监测、水文观测孔高程监测、矿区控制网建立或复测、改造等。随着GPS接收机性能价格比的不断上升，其应用于矿山
测量工作的地面部分已成为现代矿山测量的一项重要支撑技术。应用于矿区的地理信息系统即为矿区地理信息系统，或称为矿区资料源环境信息系统(MRIES)。MREIS已成为矿山测量的重要发展方向。以矿区资源环境信息系统为平台，以各种测量技术为数据获取的途径，可以建立集数据采集、处理、管理、分析、输出于一体的自动化、智能化的技术系统，作为矿山可持续发展的决策支持系统。矿山测量工作是建立MREIS的前提性工作，而建立MREIS则是矿山测量发展的必然趋势。因此，GPS在矿区应用首先就是应用于矿山测量建立矿山测量信息系统，然后以此为基础建立矿区资源环境信息系统。空间信息技术是矿山测量实现其现代任务的重要的技术支撑和保证，以“3S”技术和其他测量仪器技术的有机结合为基础的矿区资料环境信息系统就是空间信息技术在矿山测量中应用的综合性成果。
3 惯性测量系统及其在矿山测量中的应用：
惯性测量系统(Inertial Surveying System: ISS)是一种导航定位技术，具有全天候、自主式、快速多能和机动灵活等优点，为大地测量、工程测量和矿山测量作业的自动化和全能性提供了另一种新的技术手段。它是利用惯性导航的原理，以同时获取多种大地测量数据(经纬度、高程、方位角、重力异常和垂线偏差等)的一种技术系统。ISS可分为两大类：平台式系统和捷联式系统，ISS在测绘领域的主要应用目标包括：(1)控制测量，如对已有控制点的检核、加密、航测控制等；(2)管线监测、定位、地壳形变、地表沉陷观测；
(3)井下定位，各种工程和建筑测量；(4)地震、重力测量，地球物理研究；(5)井筒和罐道梁的垂直性监测等。GPS/ISS组合系统是满足高精度导航和定位要求的发展方向之一。这种组合系统可使GPS与ISS的性能得到很多互补，能够以整体大地测量模型进行数据处理，同时确定三维坐标和大地水准面，使定位和导航的精度稳定，且显著提高。惯性测量系统在矿山测量中的应用主是在矿山井下测量中的应用，进行井下测量的各项工作，当然其在地面也有广泛的应用领域，如前文所述。ISS在我国矿山测量中应用的工作尚未深入开展，有待继续发展。以GPS+ISS组合系统应用于矿山测量则是较有发展前途的一项技术
4 其他测绘新仪器新技术在矿山测量中的应用：
其他的现代测绘仪器如激光指向仪、陀螺经纬仪、数字式水准仪及相关的测绘技术等都在矿山测量中得到了应用，并以这些仪器技术为基础，形成了许多矿山测量的专用仪器，作为矿山测量应用的现代仪器和技术。
结论：
矿山测量作为一门交叉性学科，其发展和进步与采矿技术和矿业工程的发展、测量科学技术与仪器设备的发展、其它学科如数理科学、计算机科学等的发展密切相关。现代测绘技术是建立在电子技术、空间技术、光学技术、计算机技术等基础上的综合性技术，并具有智
能化、自动化等一系列优点。现代测绘科学技术迅猛发展，必然会促进矿山测量的进一步发展。以现代测绘技术、矿业工程技术和相关科学技术为基础的矿山测量，必将会形成集数据采集、处理、管理、传输、分析、表达、应用、输出为一体的智能化、自动化的技术系统，为矿区资源环境信息系统的建立提供基础性的资料，促进矿山可持续发展。
Inventory management Inventory Control On the so-called "inventory control", many people will interpret it as a "storage management", which is actually a big distortion. The traditional narrow view, mainly for warehouse inventory control of materials for inventory, data processing, storage, distribution, etc., through the implementation of anti-corrosion, temperature and humidity control means, to make the custody of the physical inventory to maintain optimum purposes. This is just a form of inventory control, or can be defined as the physical inventory control. How, then, from a broad perspective to understand inventory control? Inventory control should be related to the company's financial and operational objectives, in particular operating cash flow by optimizing the entire demand and supply chain management processes (DSCM), a reasonable set of ERP control strategy, and supported by appropriate information processing tools, tools to achieved in ensuring the timely delivery of the premise, as far as possible to reduce inventory levels, reducing inventory and obsolescence, the risk of devaluation. In this sense, the physical inventory control to achieve financial goals is just a means to control the entire inventory or just a necessary part; from the perspective of organizational functions, physical inventory control, warehouse management is mainly the responsibility of The broad inventory control is the demand and supply chain management, and the whole company's responsibility. Why until now many people's understanding of inventory control, limited physical inventory control? The following two reasons can not be ignored: First, our enterprises do not attach importance to inventory control. Especially those who benefit relatively good business, as long as there is money on the few people to consider the problem of inventory turnover. Inventory control is simply interpreted as warehouse management, unless the time to spend money, it may have been to see the inventory problem, and see the results are often very simple procurement to buy more, or did not do warehouse departments . Second, ERP misleading. Invoicing software is simple audacity to call it ERP, companies on their so-called ERP can reduce the number of inventory, inventory control, seems to rely on their small software can get. Even as SAP, BAAN ERP world, the field of
Statistical hypothesis testing Adriana Albu，Loredana Ungureanu Politehnica University Timisoara,adrianaa@aut.utt.ro Politehnica University Timisoara,loredanau@aut.utt.ro Abstract In this article,we present a Bayesian statistical hypothesis testing inspection, testing theory and the process Mentioned hypothesis testing in the real world and the importance of, and successful test of the Notes. Key words Bayesian hypothesis testing; Bayesian inference;Test of significance Introduction A statistical hypothesis test is a method of making decisions using data, whether from a controlled experiment or an observational study (not controlled). In statistics, a result is called statistically significant if it is unlikely to have occurred by chance alone, according to a pre-determined threshold probability, the significance level. The phrase "test of significance" was coined by Ronald Fisher: "Critical tests of this kind may be called tests of significance, and when such tests are available we may discover whether a second sample is or is not significantly different from the first."[1] Hypothesis testing is sometimes called confirmatory data analysis, in contrast to exploratory data analysis. In frequency probability,these decisions are almost always made using null-hypothesis tests. These are tests that answer the question Assuming that the null hypothesis is true, what is the probability of observing a value for the test statistic that is at [] least as extreme as the value that was actually observed?) 2 More formally, they represent answers to the question, posed before undertaking an experiment,of what outcomes of the experiment would lead to rejection of the null hypothesis for a pre-specified probability of an incorrect rejection. One use of hypothesis testing is deciding whether experimental results contain enough information to cast doubt on conventional wisdom. Statistical hypothesis testing is a key technique of frequentist statistical inference. The Bayesian approach to hypothesis testing is to base rejection of the hypothesis on the posterior probability.[3][4]Other approaches to reaching a decision based on data are available via decision theory and optimal decisions. The critical region of a hypothesis test is the set of all outcomes which cause the null hypothesis to be rejected in favor of the alternative hypothesis. The critical region is usually denoted by the letter C. One-sample tests are appropriate when a sample is being compared to the population from a hypothesis. The population characteristics are known from theory or are calculated from the population.
外文出处： 《Exploiting Software How to Break Code》By Greg Hoglund, Gary McGraw Publisher : Addison Wesley Pub Date : February 17, 2004 ISBN : 0-201-78695-8 译文标题： JDBC接口技术 译文： JDBC是一种可用于执行SQL语句的JavaAPI（ApplicationProgrammingInterface应用程序设计接口）。它由一些Java语言编写的类和界面组成。JDBC为数据库应用开发人员、数据库前台工具开发人员提供了一种标准的应用程序设计接口，使开发人员可以用纯Java语言编写完整的数据库应用程序。 一、ODBC到JDBC的发展历程 说到JDBC，很容易让人联想到另一个十分熟悉的字眼“ODBC”。它们之间有没有联系呢？如果有，那么它们之间又是怎样的关系呢？ ODBC是OpenDatabaseConnectivity的英文简写。它是一种用来在相关或不相关的数据库管理系统（DBMS）中存取数据的，用C语言实现的，标准应用程序数据接口。通过ODBCAPI，应用程序可以存取保存在多种不同数据库管理系统（DBMS）中的数据，而不论每个DBMS使用了何种数据存储格式和编程接口。 1．ODBC的结构模型 ODBC的结构包括四个主要部分：应用程序接口、驱动器管理器、数据库驱动器和数据源。应用程序接口：屏蔽不同的ODBC数据库驱动器之间函数调用的差别，为用户提供统一的SQL编程接口。 驱动器管理器：为应用程序装载数据库驱动器。 数据库驱动器：实现ODBC的函数调用，提供对特定数据源的SQL请求。如果需要，数据库驱动器将修改应用程序的请求，使得请求符合相关的DBMS所支持的文法。 数据源：由用户想要存取的数据以及与它相关的操作系统、DBMS和用于访问DBMS的网络平台组成。 虽然ODBC驱动器管理器的主要目的是加载数据库驱动器，以便ODBC函数调用，但是数据库驱动器本身也执行ODBC函数调用，并与数据库相互配合。因此当应用系统发出调用与数据源进行连接时，数据库驱动器能管理通信协议。当建立起与数据源的连接时，数据库驱动器便能处理应用系统向DBMS发出的请求，对分析或发自数据源的设计进行必要的翻译，并将结果返回给应用系统。 2．JDBC的诞生 自从Java语言于1995年5月正式公布以来，Java风靡全球。出现大量的用java语言编写的程序，其中也包括数据库应用程序。由于没有一个Java语言的API，编程人员不得不在Java程序中加入C语言的ODBC函数调用。这就使很多Java的优秀特性无法充分发挥，比如平台无关性、面向对象特性等。随着越来越多的编程人员对Java语言的日益喜爱，越来越多的公司在Java程序开发上投入的精力日益增加，对java语言接口的访问数据库的API 的要求越来越强烈。也由于ODBC的有其不足之处，比如它并不容易使用，没有面向对象的特性等等，SUN公司决定开发一Java语言为接口的数据库应用程序开发接口。在JDK1．x 版本中，JDBC只是一个可选部件，到了JDK1．1公布时，SQL类包（也就是JDBCAPI）
摘要： 建筑工程在施工过程中，施工组织方案的优劣不仅直接影响工程的质量，对工期及施工过程中的人员安全也有重要影响。施工组织是项目建设和指导工程施工的重要技术经济文件。能调节施工中人员、机器、原料、环境、工艺、设备、土建、安装、管理、生产等矛盾,要对施工组织设计进行监督和控制,才能科学合理的保证工程项目高质量、低成本、少耗能的完成。 关键词： 项目管理施工组织方案重要性 施工组织设计就是对工程建设项目整个施工过程的构思设想和具体安排，是施工组织管理工作的核心和灵魂。其目的是使工程速度快、质量好、效益高。使整个工程在施工中获得相对的最优效果。 1．编制施工组织设计重要性的原因 建筑工程及其施工具有固定性与流动性、多样性与单件性、形体庞大与施工周期长这三对特点。所以，每一建筑工程的施工都必须进行施工组织设计。这是因为：其它一般工业产品的生产都有着自己固定的、长期适用的工厂。而建筑施工具有流动性的特点，不可能建立这样的工厂，只能是当每一个建筑工程施工时，建立一个相应的、临时性的，如同工厂作用性质的施工现场准备，即工地。施工单件性特点与施工流动性特点，决定了每一建筑工程施工都要选择相应的机具和劳动力组织。选择施工方法、拟定施工技术方案及其劳动力组织和机具配置，统称为施工作业能力配置。施工周期的特点，决定了各种劳动力、机具和众多材料物资技术的供应时间也比较长，这就产生了与施工总进度计划相适应的物资技术的施工组织设计内容。由此可见，施工组织设计在项目管理中是相当重要的。 2．施工组织设计方案的重要性 建筑产品作为一种商品，在项目管理中工程质量在整个施工过程中起着极其重要的作用。工程建设项目的施工组织设计与其工程造价有着密切的关系。施工组织设计基本的内容有：工程概况和施工条件的分析、施工方案、施工工艺、施工进度计划、施工总平面图。还有经济分析和施工准备工作计划。其中,施工方案及施工工艺的确定更为重要,如:施工机械的选择、水平运输方法的选择、土方的施工方法及主体结构的施工方法和施工工艺的选择等等,均直接影响着工程预算价格的变化。在保证工程质量和满足业主使用要求及工期要求的前提下,优化施工方案及施工工艺是控制投资和降低工程项目造价的重要措施和手段。 2.1施工组织方案在很大程度上影响着工程质量，因此合理的施工组织方案不仅是确保工程顺利完成的基础，也是工程安全的依据。施工组织设计是建筑工
吉林化工学院理学院 毕业论文外文翻译English Title（Times New Roman ，三号） 学生学号：08810219 学生姓名：袁庚文 专业班级：信息与计算科学0802 指导教师：赵瑛 职称副教授 起止日期：2012.2.27～2012.3.14 吉林化工学院 Jilin Institute of Chemical Technology
1 外文翻译的基本内容 应选择与本课题密切相关的外文文献（学术期刊网上的），译成中文，与原文装订在一起并独立成册。在毕业答辩前，同论文一起上交。译文字数不应少于3000个汉字。 2 书写规范 2.1 外文翻译的正文格式 正文版心设置为：上边距：3.5厘米，下边距：2.5厘米，左边距：3.5厘米，右边距：2厘米，页眉：2.5厘米，页脚：2厘米。 中文部分正文选用模板中的样式所定义的“正文”，每段落首行缩进2字；或者手动设置成每段落首行缩进2字，字体：宋体，字号：小四，行距：多倍行距1.3，间距：前段、后段均为0行。 这部分工作模板中已经自动设置为缺省值。 2.2标题格式 特别注意：各级标题的具体形式可参照外文原文确定。 1．第一级标题（如：第1章绪论）选用模板中的样式所定义的“标题1”，居左；或者手动设置成字体：黑体，居左，字号：三号，1.5倍行距，段后11磅，段前为11磅。 2．第二级标题（如：1.2 摘要与关键词）选用模板中的样式所定义的“标题2”，居左；或者手动设置成字体：黑体，居左，字号：四号，1.5倍行距，段后为0，段前0.5行。 3．第三级标题（如：1.2.1 摘要）选用模板中的样式所定义的“标题3”，居左；或者手动设置成字体：黑体，居左，字号：小四，1.5倍行距，段后为0，段前0.5行。 标题和后面文字之间空一格（半角）。 3 图表及公式等的格式说明 图表、公式、参考文献等的格式详见《吉林化工学院本科学生毕业设计说明书（论文）撰写规范及标准模版》中相关的说明。
农村社会养老保险的现状、问题与对策研究社会保障对国家安定和经济发展具有重要作用，“城乡二元经济”现象日益凸现，农村社会保障问题客观上成为社会保障体系中极为重要的部分。建立和完善农村社会保障制度关系到农村乃至整个社会的经济发展，并且对我国和谐社会的构建至关重要。我国农村社会保障制度尚不完善，因此有必要加强对农村独立社会保障制度的构建，尤其对农村养老制度的改革，建立健全我国社会保障体系。从户籍制度上看，我国居民养老问题可分为城市居民养老和农村居民养老两部分。对于城市居民我国政府已有比较充足的政策与资金投人，使他们在物质和精神方面都能得到较好地照顾，基本实现了社会化养老。而农村居民的养老问题却日益突出，成为摆在我国政府面前的一个紧迫而又棘手的问题。 一、我国农村社会养老保险的现状 关于农村养老，许多地区还没有建立农村社会养老体系，已建立的地区也存在很多缺陷，运行中出现了很多问题，所以完善农村社会养老保险体系的必要性与紧迫性日益体现出来。 （一）人口老龄化加快 随着城市化步伐的加快和农村劳动力的输出，越来越多的农村青壮年人口进入城市，年龄结构出现“两头大，中间小”的局面。中国农村进入老龄社会的步伐日渐加快。第五次人口普查显示：中国65岁以上的人中农村为5938万，占老龄总人口的67.4%.在这种严峻的现实面前，农村社会养老保险的徘徊显得极其不协调。 （二）农村社会养老保险覆盖面太小 中国拥有世界上数量最多的老年人口，且大多在农村。据统计，未纳入社会保障的农村人口还很多，截止2000年底，全国7400多万农村居民参加了保险，占全部农村居民的11.18%，占成年农村居民的11.59%.另外，据国家统计局统计，我国进城务工者已从改革开放之初的不到200万人增加到2003年的1.14亿人。而基本方案中没有体现出对留在农村的农民和进城务工的农民给予区别对待。进城务工的农民既没被纳入到农村养老保险体系中，也没被纳入到城市养老保险体系中，处于法律保护的空白地带。所以很有必要考虑这个特殊群体的养老保险问题。
外文翻译 专业机械设计制造及其自动化学生姓名刘链柱 班级机制111 学号1110101102 指导教师葛友华
外文资料名称： Design and performance evaluation of vacuum cleaners using cyclone technology 外文资料出处：Korean J. Chem. Eng., 23(6), (用外文写) 925-930 (2006) 附件： 1.外文资料翻译译文 2.外文原文
应用旋风技术真空吸尘器的设计和性能介绍 吉尔泰金，洪城铱昌，宰瑾李， 刘链柱译 摘要：旋风型分离器技术用于真空吸尘器 - 轴向进流旋风和切向进气道流旋风有效地收集粉尘和降低压力降已被实验研究。优化设计等因素作为集尘效率，压降，并切成尺寸被粒度对应于分级收集的50％的效率进行了研究。颗粒切成大小降低入口面积，体直径，减小涡取景器直径的旋风。切向入口的双流量气旋具有良好的性能考虑的350毫米汞柱的低压降和为1.5μm的质量中位直径在1米3的流量的截止尺寸。一使用切向入口的双流量旋风吸尘器示出了势是一种有效的方法，用于收集在家庭中产生的粉尘。 摘要及关键词：吸尘器; 粉尘; 旋风分离器 引言 我们这个时代的很大一部分都花在了房子，工作场所，或其他建筑，因此，室内空间应该是既舒适情绪和卫生。但室内空气中含有超过室外空气因气密性的二次污染物，毒物，食品气味。这是通过使用产生在建筑中的新材料和设备。真空吸尘器为代表的家电去除有害物质从地板到地毯所用的商用真空吸尘器房子由纸过滤，预过滤器和排气过滤器通过洁净的空气排放到大气中。虽然真空吸尘器是方便在使用中，吸入压力下降说唱空转成比例地清洗的时间，以及纸过滤器也应定期更换，由于压力下降，气味和细菌通过纸过滤器内的残留粉尘。 图1示出了大气气溶胶的粒度分布通常是双峰形，在粗颗粒（>2.0微米）模式为主要的外部来源，如风吹尘，海盐喷雾，火山，从工厂直接排放和车辆废气排放，以及那些在细颗粒模式包括燃烧或光化学反应。表1显示模式，典型的大气航空的直径和质量浓度溶胶被许多研究者测量。精细模式在0.18?0.36 在5.7到25微米尺寸范围微米尺寸范围。质量浓度为2?205微克，可直接在大气气溶胶和 3.85至36.3μg/m3柴油气溶胶。
英语专业毕业论文翻译 类论文 Document number：NOCG-YUNOO-BUYTT-UU986-1986UT
毕业论文（设计）Title:The Application of the Iconicity to the Translation of Chinese Poetry 题目:象似性在中国诗歌翻译中的应用 学生姓名孔令霞 学号 BC09150201 指导教师祁晓菲助教 年级 2009级英语本科（翻译方向）二班 专业英语 系别外国语言文学系
黑龙江外国语学院本科生毕业论文（设计）任务书 摘要
索绪尔提出的语言符号任意性，近些年不断受到质疑，来自语言象似性的研究是最大的挑战。语言象似性理论是针对语言任意性理论提出来的，并在不断发展。象似性是当今认知语言学研究中的一个重要课题，是指语言符号的能指与所指之间的自然联系。本文以中国诗歌英译为例，探讨象似性在中国诗歌翻译中的应用，从以下几个部分阐述：（1）象似性的发展；（2）象似性的定义及分类；（3）中国诗歌翻译的标准；（4）象似性在中国诗歌翻译中的应用，主要从以下几个方面论述：声音象似、顺序象似、数量象似、对称象似方面。通过以上几个方面的探究，探讨了中国诗歌翻译中象似性原则的重大作用，在诗歌翻译过程中有助于得到“形神皆似”和“意美、音美、形美”的理想翻译效果。 关键词：象似性；诗歌；翻译
Abstract The arbitrariness theory of language signs proposed by Saussure is severely challenged by the study of language iconicity in recent years. The theory of iconicity is put forward in contrast to that of arbitrariness and has been developing gradually. Iconicity, which is an important subject in the research of cognitive linguistics, refers to a natural resemblance or analogy between the form of a sign and the object or concept. This thesis mainly discusses the application of the iconicity to the translation of Chinese poetry. The paper is better described from the following parts: (1) The development of the iconicity; (2) The definition and classification of the iconicity; (3) The standards of the translation to Chinese poetry; (4) The application of the iconicity to the translation of Chinese poetry, mainly discussed from the following aspects: sound iconicity, order iconicity, quantity iconicity, and symmetrical iconicity. Through in-depth discussion of the above aspects, this paper could come to the conclusion that the iconicity is very important in the translation of poetry. It is conductive to reach the ideal effect of “the similarity of form and spirit” and “the three beauties”. Key words: the iconicity; poetry; translation
XXXXXXXXX 毕业设计（论文）外文翻译 学生姓名： 院（系）： 专业班级： 指导教师： 完成日期：
施工组织设计的重要性 摘要： 建筑工程在施工过程中，施工组织方案的优劣不仅直接影响工程的质量，对工期及施工过程中的人员安全也有重要影响。施工组织是项目建设和指导工程施工的重要技术经济文件。能调节施工中人员、机器、原料、环境、工艺、设备、土建、安装、管理、生产等矛盾,要对施工组织设计进行监督和控制,才能科学合理的保证工程项目高质量、低成本、少耗能的完成。 关键词： 项目管理施工组织方案重要性 施工组织设计就是对工程建设项目整个施工过程的构思设想和具体安排，是施工组织管理工作的核心和灵魂。其目的是使工程速度快、质量好、效益高。使整个工程在施工中获得相对的最优效果。 1.编制施工组织设计重要性的原因 建筑工程及其施工具有固定性与流动性、多样性与单件性、形体庞大与施工周期长这三对特点。所以，每一建筑工程的施工都必须进行施工组织设计。这是因为：其它一般工业产品的生产都有着自己固定的、长期适用的工厂。而建筑施工具有流动性的特点，不可能建立这样的工厂，只能是当每一个建筑工程施工时，建立一个相应的、临时性的，如同工厂作用性质的施工现场准备，即工地。施工单件性特点与施工流动性特点，决定了每一建筑工程施工都要选择相应的机具和劳动力组织。选择施工方法、拟定施工技术方案及其劳动力组织和机具配置，统称为施工作业能力配置。施工周期的特点，决定了各种劳动力、机具和众多材料物资技术的供应时间也比较长，这就产生了与施工总进度计划相适应的物资技术的施工组织设计内容。由此可见，施工组织设计在项目管理中是相当重要的。 2.施工组织设计方案的重要性 建筑产品作为一种商品，在项目管理中工程质量在整个施工过程中起着极其重要的作用。工程建设项目的施工组织设计与其工程造价有着密切的关系。施工组织设计基本的内容有：工程概况和施工条件的分析、施工方案、施工工艺、施工进度计划、施工总平面图。还有经济分析和施工准备工作计划。其中,施工方案及施工工艺的确定更为重要,如:施工机械的选择、水平运输方法的选择、土方的施工方法及主体结构的施工方法和施工工艺的选择等等,均直接影响着工程预算价格的变化。在保证工程质量和满足业主使用要求及工期要求的前提下,优化施工方案及施工工艺是控制投资和降低工程项目造价的重要措施和手段。 2.1施工组织方案在很大程度上影响着工程质量，因此合理的施工组织方案 不仅是确保工程顺利完成的基础，也是工程安全的依据。施工组织设计是建筑工程设计文件的重要组成部分，是编制工程投资概预算的主要依据和编制招投标文件的
软件专业毕业论文外文文献中英文翻译 Object landscapes and lifetimes Tech nically, OOP is just about abstract data typing, in herita nee, and polymorphism, but other issues can be at least as importa nt. The rema in der of this sect ion will cover these issues. One of the most importa nt factors is the way objects are created and destroyed. Where is the data for an object and how is the lifetime of the object con trolled? There are differe nt philosophies at work here. C++ takes the approach that con trol of efficie ncy is the most importa nt issue, so it gives the programmer a choice. For maximum run-time speed, the storage and lifetime can be determined while the program is being written, by placing the objects on the stack (these are sometimes called automatic or scoped variables) or in the static storage area. This places a priority on the speed of storage allocatio n and release, and con trol of these can be very valuable in some situati ons. However, you sacrifice flexibility because you must know the exact qua ntity, lifetime, and type of objects while you're writing the program. If you are trying to solve a more general problem such as computer-aided desig n, warehouse man ageme nt, or air-traffic con trol, this is too restrictive. The sec ond approach is to create objects dyn amically in a pool of memory called the heap. In this approach, you don't know un til run-time how many objects you n eed, what their lifetime is, or what their exact type is. Those are determined at the spur of the moment while the program is runnin g. If you n eed a new object, you simply make it on the heap at the point that you n eed it. Because the storage is man aged dyn amically, at run-time, the amount of time required to allocate storage on the heap is sig ni fica ntly Ion ger tha n the time to create storage on the stack. (Creat ing storage on the stack is ofte n a si ngle assembly in structio n to move the stack poin ter dow n, and ano ther to move it back up.) The dyn amic approach makes the gen erally logical assumpti on that objects tend to be complicated, so the extra overhead of finding storage and releas ing that storage will not have an importa nt impact on the creati on of an object .In additi on, the greater flexibility is esse ntial to solve the gen eral program ming problem. Java uses the sec ond approach, exclusive". Every time you want to create an object, you use the new keyword to build a dyn amic in sta nee of that object. There's ano ther issue, however, and that's the lifetime of an object. With Ian guages that allow objects to be created on the stack, the compiler determines how long the object lasts and can automatically destroy it. However, if you create it on the heap the compiler has no kno wledge of its lifetime. In a Ianguage like C++, you must determine programmatically when to destroy the
毕业论文（设计）外文翻译 题目：中国上市公司偏好股权融资：非制度性因素 系部名称：经济管理系专业班级:会计082班 学生姓名：任民学号： 200880444228 指导教师：冯银波教师职称:讲师 年月日
译文： 中国上市公司偏好股权融资：非制度性因素 国际商业管理杂志 2009.10 摘要：本文把重点集中于中国上市公司的融资活动，运用西方融资理论，从非制度性因素方面，如融资成本、企业资产类型和质量、盈利能力、行业因素、股权结构因素、财务管理水平和社会文化，分析了中国上市公司倾向于股权融资的原因，并得出结论，股权融资偏好是上市公司根据中国融资环境的一种合理的选择。最后，针对公司的股权融资偏好提出了一些简明的建议。 关键词：股权融资，非制度性因素，融资成本 一、前言 中国上市公司偏好于股权融资，根据中国证券报的数据显示，1997年上市公司在资本市场的融资金额为95.87亿美元，其中股票融资的比例是72.5％，，在1998年和1999年比例分别为72.6％和72.3％，另一方面，债券融资的比例分别是17.8％，24.9％和25.1％。在这三年，股票融资的比例，在比中国发达的资本市场中却在下跌。以美国为例，当美国企业需要的资金在资本市场上，于股权融资相比他们宁愿选择债券融资。统计数据显示，从1970年到1985年，美日企业债券融资占了境外融资的91.7％，比股权融资高很多。阎达五等发现，大约中国3/4的上市公司偏好于股权融资。许多研究的学者认为，上市公司按以下顺序进行外部融资：第一个是股票基金，第二个是可转换债券，三是短期债务，最后一个是长期负债。许多研究人员通常分析我国上市公司偏好股权是由于我们国家的经济改革所带来的制度性因素。他们认为，上市公司的融资活动违背了西方古典融资理论只是因为那些制度性原因。例如，优序融资理论认为，当企业需要资金时，他们首先应该转向内部资金（折旧和留存收益），然后再进行债权融资，最后的选择是股票融资。在这篇文章中，笔者认为，这是因为具体的金融环境激活了企业的这种偏好，并结合了非制度性因素和西方金融理论，尝试解释股权融资偏好的原因。
毕业设计（论文） 外文翻译 题目西安市水源工程中的 水电站设计 专业水利水电工程 班级 学生 指导教师 2016年
研究钢弧形闸门的动态稳定性 牛志国 河海大学水利水电工程学院，中国南京，邮编210098 nzg_197901@https://www.doczj.com/doc/6c2680050.html,，niuzhiguo@https://www.doczj.com/doc/6c2680050.html, 李同春 河海大学水利水电工程学院，中国南京，邮编210098 ltchhu@https://www.doczj.com/doc/6c2680050.html, 摘要 由于钢弧形闸门的结构特征和弹力，调查对参数共振的弧形闸门的臂一直是研究领域的热点话题弧形弧形闸门的动力稳定性。在这个论文中，简化空间框架作为分析模型，根据弹性体薄壁结构的扰动方程和梁单元模型和薄壁结构的梁单元模型，动态不稳定区域的弧形闸门可以通过有限元的方法，应用有限元的方法计算动态不稳定性的主要区域的弧形弧形闸门工作。此外，结合物理和数值模型，对识别新方法的参数共振钢弧形闸门提出了调查，本文不仅是重要的改进弧形闸门的参数振动的计算方法，但也为进一步研究弧形弧形闸门结构的动态稳定性打下了坚实的基础。 简介 低举升力，没有门槽，好流型，和操作方便等优点，使钢弧形闸门已经广泛应用于水工建筑物。弧形闸门的结构特点是液压完全作用于弧形闸门，通过门叶和主大梁，所以弧形闸门臂是主要的组件确保弧形闸门安全操作。如果周期性轴向载荷作用于手臂，手臂的不稳定是在一定条件下可能发生。调查指出:在弧形闸门的20次事故中，除了极特殊的破坏情况下，弧形闸门的破坏的原因是弧形闸门臂的不稳定;此外，明显的动态作用下发生破坏。例如:张山闸，位于中国的江苏省，包括36个弧形闸门。当一个弧形闸门打开放水时，门被破坏了，而其他弧形闸门则关闭，受到静态静水压力仍然是一样的，很明显，一个动态的加载是造成的弧形闸门破坏一个主要因素。因此弧形闸门臂的动态不稳定是造成弧形闸门(特别是低水头的弧形闸门)破坏的主要原是毫无疑问。
参考文献 一、翻译理论与实践相关书目 谢天振主编. 《当代国外翻译理论导读》. 天津：南开大学出版社，2008. Jeremy Munday. 《翻译学导论——理论与实践》Introducing Translation Studies---Theories and Applications. 李德凤等译. 北京：商务印书馆，2007. 包惠南、包昂. 《中国文化与汉英翻译》. 北京：外文出版社, 2004. 包惠南. 《文化语境与语言翻译》. 北京：中国对外翻译出版公司. 2001. 毕继万. 《世界文化史故事大系——英国卷》. 上海：上海外语教育出版社, 2003. 蔡基刚. 《英汉汉英段落翻译与实践》. 上海：复旦大学出版社, 2001. 蔡基刚. 《英汉写作对比研究》. 上海：复旦大学出版社, 2001. 蔡基刚. 《英语写作与抽象名词表达》. 上海：复旦大学出版社, 2003. 曹雪芹、高鄂. 《红楼梦》. 陈定安. 《英汉比较与翻译》. 北京：中国对外翻译出版公司, 1991. 陈福康. 《中国译学理论史稿》（修订本）. 上海：上海外语教育出版社. 2000. 陈生保. 《英汉翻译津指》. 北京：中国对外翻译出版公司. 1998. 陈廷祐. 《英文汉译技巧》. 北京：外语教学与研究出版社. 2001. 陈望道. 《修辞学发凡》. 上海：上海教育出版社, 1979. 陈文伯. 《英汉翻译技法与练习》. 北京：世界知识出版社. 1998. 陈中绳、吴娟. 《英汉新词新义佳译》. 上海：上海翻译出版公司. 1990. 陈忠诚. 《词语翻译丛谈》. 北京：中国对外翻译出版公司, 1983. 程希岚. 《修辞学新编》. 吉林：吉林人民出版社, 1984. 程镇球. 《翻译论文集》. 北京：外语教学与研究出版社. 2002. 程镇球. 《翻译问题探索》. 北京：商务印书馆, 1980. 崔刚. 《广告英语》. 北京：北京理工大学出版社, 1993. 单其昌. 《汉英翻译技巧》. 北京：外语教学与研究出版社. 1990. 单其昌. 《汉英翻译讲评》. 北京：对外贸易教育出版社. 1989. 邓炎昌、刘润清. 《语言与文化——英汉语言文化对比》. 北京：外语教学与研究出版社, 1989. 丁树德. 《英汉汉英翻译教学综合指导》. 天津：天津大学出版社, 1996. 杜承南等，《中国当代翻译百论》. 重庆：重庆大学出版社, 1994. 《翻译通讯》编辑部. 《翻译研究论文集（1894-1948）》. 北京：外语教学与研究出版社. 1984. 《翻译通讯》编辑部. 《翻译研究论文集（1949-1983）》. 北京：外语教学与研究出版社. 1984. . 范勇主编. 《新编汉英翻译教程》. 天津：南开大学出版社. 2006. 方梦之、马秉义（编选）. 《汉译英实践与技巧》. 北京：旅游教育出版社. 1996. 方梦之. 《英语汉译实践与技巧》. 天津：天津科技翻译出版公司. 1994. 方梦之主编. 《译学辞典》. 上海：上海外语教育出版社. 2004. 冯翠华. 《英语修辞大全》，北京：外语教学与研究出版社, 1995. 冯庆华. 《文体与翻译》. 上海：上海外语教育出版社, 2002. 冯庆华主编. 《文体翻译论》. 上海：上海外语教育出版社. 2002. 冯胜利. 《汉语的韵律、词法与句法》. 北京：北京大学出版社, 1997. 冯志杰. 《汉英科技翻译指要》. 北京：中国对外翻译出版公司. 1998. 耿占春. 《隐喻》. 北京：东方出版社, 1993.