Inductors
Commercial, Molded
IM
Vishay Dale
https://www.doczj.com/doc/6c3183689.html, For technical questions contact magnetics@https://www.doczj.com/doc/6c3183689.html,
Document Number: 34030
FEATURES
?Wide inductance range in small package ?
Flame retardant coating
?Precision performance, excellent reliability,sturdy construction
?Epoxy molded construction provides superior moisture protection
ELECTRICAL SPECIFICATIONS
Inductance Tolerance: ± 1 %, ± 3 %, ± 5 %, ± 10 %, ± 20 %Other tolerances available on request.
Insulation Resistance: 1000 Megohm minimum per MIL-STD-202, Method 302, Test Condition B
Dielectric Strength: Per MIL-STD-202, Method 301:
1000 VAC for IM-2, -4, -6, -8, -9 and -10. 200 VAC for IM-1
MECHANICAL SPECIFICATIONS
Terminal Strength: Per MIL-STD-202, Method 211,Test Condition A: For IM-1, 3 pounds pull
For IM-2, -4, -6, -8, -9 and -10, 5 pounds pull and twist Weight: IM-1 = 0.25 gram maximum IM-2 = 0.30 gram maximum IM-4 = 0.65 gram maximum IM-6 = 0.95 gram maximum IM-8 = 1.5 gram maximum IM-9 = 2.0 gram maximum IM-10 = 2.5 gram maximum
MATERIAL SPECIFICATIONS
Encapsulant: Epoxy
Standard Terminals: IM-1 and IM-2, 24 AWG; IM-4, IM-6and IM-9, 22 AWG; IM-8, 21 AWG; and IM-10, 20 AWG,tinned copper
TEST EQUIPMENT*
?H/P 4342A Q-Meter
?Measurements Corporation Megacycle Meter, Model 59?Wheatstone bridge
* Test procedures per MIL-PRF-15305
INDUCTANCE RANGE AND MILITARY STANDARD
MODEL INDUCTANCE RANGE FROM TO IM-10.10 μH 100 μH IM-2
0.022 μH 0.082 μH 0.10 μH 1 μH 1.2 μH 27 μH 33 μH 1000 μH IM-4
0.15 μH 4.7 μH 5.6 μH 33 μH 36 μH 240 μH 270 μH 1800 μH IM-6
0.10 μH 2.7 μH 3.3 μH 27 μH 33 μH 220 μH 270 μH 1000 μH IM-81100 μH 3600 μH IM-968 μH 150 μH IM-10
3900 μH
10000 μH
ENVIRONMENTAL PERFORMANCE
TEST
CONDITIONS SPECIFICATIONS Barometric Pressure T est Condition C MIL-STD-202,Method 105Thermal Shock T est Condition A-1
MIL-STD-202,Method 107Flammability -MIL-STD-202,Method 111Overload
-MIL-PRF-15305Low T emperature Storage
-MIL-PRF-15305Resistance to Soldering Heat Test Condition A
MIL-STD-202,Method 210Resistance to Solvents
-MIL-STD-202,Method 215
IM
Inductors, Commercial, Molded
Vishay Dale
Document Number: 34030For technical questions contact magnetics@https://www.doczj.com/doc/6c3183689.html,
https://www.doczj.com/doc/6c3183689.html,
* Measured with full length lead. **Rated DC current based on maximum temperature rise as shown in table.STANDARD ELECTRICAL SPECIFICATIONS
MODEL
IND.(μH)
TOL.
Q MIN.
TEST FREQ.L & Q (MHz)
SELF-RESONANT*FREQ. MIN. (MHz)
DCR MAX. (Ohms)RATED**
DC CURRENT (mA)
IM-10.10± 10 %3525.0680.00.13895P H E N O L I C C O R E IM-10.12± 10 %3525.0650.00.15835IM-10.15± 10 %3525.0560.00.18760IM-10.18± 10 %3525.0540.00.21705IM-10.22± 10 %3025.0500.00.25645IM-10.27± 10 %3025.0440.00.38525IM-10.33± 10 %2525.0410.00.49460IM-10.39± 10 %2525.0380.00.59420IM-10.47± 10 %2525.0340.00.62410IM-10.56± 10 %4025.0250.00.18510I R O N C O R E
IM-10.68± 10 %4025.0215.00.20485IM-10.82± 10 %4025.0200.00.22465IM-1 1.0± 10 %4025.0190.00.25435IM-1 1.2± 10 %357.9170.00.28410IM-1 1.5± 10 %407.9150.00.49310IM-1 1.8± 10 %407.9135.00.56290IM-1 2.2± 10 %457.9130.00.72257IM-1 2.7± 10 %457.9110.00.85236IM-1 3.3± 10 %457.9100.0 1.2198IM-1 3.9± 10 %507.995.0 1.5178IM-1 4.7± 10 %557.988.0 2.1150IM-1 5.6± 10 %557.978.0 2.8130IM-1 6.8± 10 %557.969.0 3.2122IM-18.2± 10 %457.952.0 4.4104IM-110.0± 10 %457.947.0 5.295IM-112.0± 10 %40 2.531.0 3.0126IM-115.0± 10 %40 2.526.0 3.4118IM-118.0± 10 %40 2.523.0 3.8112IM-122.0± 10 %45 2.520.0 4.3105IM-127.0± 10 %45 2.517.0 4.7100IM-133.0± 10 %45 2.515.0 5.295IM-139.0± 10 %45 2.513.5 6.883.5IM-147.0± 10 %45 2.512.58.276IM-156.0± 10 %45 2.511.510.069IM-168.0± 10 %45 2.510.511.564IM-182.0± 10 %45 2.510.016.054.5IM-1100.0± 10 %45 2.59.517.552IM-20.022± 20 %5050.0900.00.0252400P H E N O L I C C O R E IM-20.027± 10 %4025.0875.00.032200IM-20.033± 10 %4025.0850.00.0352000IM-20.039± 10 %4025.0825.00.041900IM-20.047± 10 %4025.0800.00.0451800IM-20.056± 10 %4025.0775.00.051700IM-20.068± 10 %4025.0750.00.061500IM-20.082± 10 %4025.0725.00.071400IM-20.10± 10 %4025.0680.00.081350P H E N O L I C C O R E IM-20.12± 10 %4025.0640.00.091270IM-20.15± 10 %3825.0600.00.101200IM-20.18± 10 %3525.0550.00.121105IM-20.22± 10 %3325.0510.00.141025IM-20.27± 10 %3325.0430.00.16960IM-20.33± 10 %3025.0410.00.22815IM-20.39± 10 %3025.0365.00.30700IM-20.47± 10 %3025.0330.00.35650IM-20.56± 10 %3025.0300.00.50545IM-20.68± 10 %2825.0275.00.60495IM-20.82± 10 %2825.0250.00.85415IM-2 1.0± 10 %2525.0230.0 1.0385IM-2 1.2± 10 %257.9150.00.18590I R O N C O R E IM-2 1.5± 10 %287.9140.00.22535IM-2 1.8± 10 %307.9125.00.30455IM-2 2.2± 10 %307.9115.00.40395IM-2 2.7± 10 %377.9100.00.55355IM-2 3.3± 10 %457.990.00.85270IM-2 3.9± 10 %457.980.0 1.0250IM-2 4.7± 10 %457.975.0
1.2
230
IM
Vishay Dale
Inductors, Commercial, Molded
https://www.doczj.com/doc/6c3183689.html, For technical questions contact magnetics@https://www.doczj.com/doc/6c3183689.html,
Document Number: 34030
* Measured with full length lead. **Rated DC current based on maximum temperature rise as shown in table.STANDARD ELECTRICAL SPECIFICATIONS
MODEL
IND.(μH)
TOL.
Q MIN.
TEST FREQ.L & Q (MHz)
SELF-RESONANT*FREQ. MIN. (MHz)
DCR MAX. (Ohms)RATED**
DC CURRENT (mA)
IM-2 5.6± 10 %507.965.0 1.8185I R O N C O R E
IM-2 6.8± 10 %507.960.0 2.0175IM-28.2± 10 %557.955.0 2.7155IM-210.0± 10 %557.950.0 3.7130IM-212.0± 10 %45 2.540.0 2.7155IM-215.0± 10 %40 2.535.0 2.8150IM-218.0± 10 %50 2.530.0 3.1145IM-222.0± 10 %50 2.525.0 3.3140IM-227.0± 10 %50 2.520.0 3.5135IM-233.0± 10 %45 2.524.0 3.4130F E R R I T E C O R E IM-239.0± 10 %45 2.522.0 3.6125IM-247.0± 10 %45 2.520.0 4.5110IM-256.0± 10 %45 2.518.0 5.7100IM-268.0± 10 %50 2.515.0 6.792IM-282.0± 10 %50 2.514.07.388IM-2100.0± 10 %50 2.513.0884IM-2120.0± 10 %300.7912.01366IM-2150.0± 10 %300.7911.01561IM-2180.0± 10 %300.7910.01757IM-2220.0± 10 %300.799.02152IM-2270.0± 10 %300.798.02547IM-2330.0± 10 %300.797.02845IM-2390.0± 10 %300.79 6.53540IM-2470.0± 10 %300.79 6.04236IM-2560.0± 10 %300.79 5.04635IM-2680.0± 10 %300.79 4.06030IM-2820.0± 10 %300.79 3.86529IM-21000.0± 10 %300.79 3.47228IM-40.15± 20 %5025525.00.032450P H E N O L I C C O R E IM-40.22± 20 %5025450.00.0551810IM-40.33± 20 %4525360.00.091400IM-40.47± 20 %4525310.00.121225IM-40.56± 10 %5025280.00.1351150IM-40.68± 10 %5025250.00.151100IM-40.82± 10 %5025220.00.22900IM-4 1.0± 10 %5025200.00.29785IM-4 1.2± 10 %337.9180.00.42650IM-4 1.5± 10 %337.9160.00.50600IM-4 1.8± 10 %337.9150.00.65525IM-4 2.2± 10 %337.9135.00.95435IM-4 2.7± 10 %337.9120.0 1.20385IM-4 3.3± 10 %337.9110.0 2.0300IM-4 3.9± 10 %337.9100.0 2.30280IM-4 4.7± 10 %337.990.0 2.60260IM-4 5.6± 10 %457.960.00.32495I R O N C O R E IM-4 6.8± 10 %507.955.00.50395IM-48.2± 10 %507.950.00.60360IM-410.0± 10 %557.945.00.90290IM-412.0± 10 %65 2.542.0 1.10265IM-415.0± 10 %65 2.540.0 1.40240IM-418.0± 10 %75 2.534.0 2.25185IM-422.0± 10 %75 2.530.0 2.50175IM-427.0± 10 %60 2.525.0 2.60170IM-433.0± 10 %65 2.519.0
3.0
165
IM
Inductors, Commercial, Molded
Vishay Dale
Document Number: 34030For technical questions contact magnetics@https://www.doczj.com/doc/6c3183689.html,
https://www.doczj.com/doc/6c3183689.html,
* Measured with full length lead. **Rated DC current based on maximum temperature rise as shown in table.STANDARD ELECTRICAL SPECIFICATIONS
MODEL IND.(μH)TOL.Q MIN.TEST FREQ.L & Q (MHz)
SELF-RESONANT*FREQ. MIN. (MHz)
DCR MAX. (Ohms)RATED**
DC CURRENT (mA)
IM-436.0± 5 %60 2.515.5 2.50180I R O N C O R E
IM-439.0± 5 %60 2.514.5 2.60176IM-443.0± 5 %60 2.513.7 2.70172IM-447.0± 5 %55 2.513.0 2.75170IM-451.0± 5 %55 2.512.7 2.85167IM-456.0± 5 %55 2.512.0 3.00164IM-462.0± 5 %55 2.511.5 3.15160IM-468.0± 5 %55 2.511.0 3.30156IM-475.0± 5 %55 2.510.5 3.70147IM-482.0± 5 %50 2.510.3 3.90143IM-491.0± 5 %50 2.510.0 4.30136IM-4100.0± 5 %50 2.59.5 4.50133IM-4110.0± 5 %600.798.9 4.90128IM-4120.0± 5 %650.798.7 5.20124IM-4130.0± 5 %650.798.5 5.45121IM-4150.0± 5 %650.798.0 6.05114IM-4160.0± 5 %650.797.5 6.40111IM-4180.0± 5 %650.797.0 6.75108IM-4200.0± 5 %650.79 6.57.10106IM-4220.0± 5 %650.79 6.27.45103IM-4240.0± 5 %650.79 5.97.80101IM-4270.0± 5 %650.79 5.711.0129IM-4300.0± 5 %650.79 5.411.5125IM-4330.0± 5 %650.79 5.112.0123IM-4360.0± 5 %650.79 4.815.5108IM-4390.0± 5 %650.79 4.516.3105IM-4430.0± 5 %650.79 4.217.1102IM-4470.0± 5 %650.79 3.917.9100IM-4510.0± 5 %650.79 3.718.898IM-4560.0± 5 %650.79 3.524.785IM-4620.0± 5 %650.79 3.325.983IM-4680.0± 5 %550.79 3.127.281IM-4750.0± 5 %550.79 2.928.679IM-4820.0± 5 %550.79 2.730.077IM-4910.0± 5 %550.79 2.531.576IM-41000.0± 5 %550.79 2.333.174IM-41100.0± 5 %300.25 2.143.564IM-41200.0± 5 %300.25 2.045.763IM-41300.0± 5 %300.25 1.949.061IM-41500.0± 5 %300.25 1.852.559IM-41600.0± 5 %300.25 1.754.058IM-41800.0± 5 %300.25 1.656.756IM-60.10± 20 %5525.0510.00.0203600P H E N O L I C C O R E IM-60.12± 20 %5525.0510.00.0253300IM-60.15± 20 %5525.0510.00.0303000IM-60.18± 20 %5525.0450.00.0302900IM-60.22± 20 %5025.0415.00.0352800IM-60.27± 20 %5025.0380.00.0502400IM-60.33± 20 %5025.0350.00.0652000IM-60.39± 20 %5025.0320.00.0801800IM-60.47± 20 %5025.0300.00.0851700IM-60.56± 10 %5025.0270.00.1251450IM-60.68± 10 %4525.0250.00.1501300IM-60.82± 10 %4025.0210.00.2051100IM-6 1.0± 10 %4025.0200.00.290930IM-6 1.2± 10 %307.9180.00.400785IM-6 1.5± 10 %307.9170.00.485700IM-6 1.8± 10 %307.9150.00.740580IM-6 2.2± 10 %307.9140.00.970505IM-6
2.7
± 10 %
30
7.9
120.0
1.20
460
IM
Vishay Dale
Inductors, Commercial, Molded
https://www.doczj.com/doc/6c3183689.html, For technical questions contact magnetics@https://www.doczj.com/doc/6c3183689.html,
Document Number: 34030
* Measured with full length lead. **Rated DC current based on maximum temperature rise as shown in table.
STANDARD ELECTRICAL SPECIFICATIONS
MODEL
IND.(μH)TOL.
Q MIN.TEST FREQ.L & Q (MHz)
SELF-RESONANT*FREQ. MIN. (MHz)
DCR MAX. (Ohms)RATED**
DC CURRENT (mA)
LT10K I R O N C O R E
IM-6 3.3± 10 %307.970.00.140990IM-6 3.9± 10 %307.965.00.155870IM-6 4.7± 10 %307.960.00.210745IM-6 5.6± 10 %307.950.00.280645IM-6 6.8± 10 %307.950.00.375560IM-68.2± 10 %307.948.00.440540IM-610.0± 10 %307.942.00.605440IM-612.0± 10 %50 2.536.0 1.05370IM-615.0± 10 %55 2.530.0 1.20310IM-618.0± 10 %60 2.530.0 1.95255IM-622.0± 10 %60 2.524.0 2.20240IM-627.0± 10 %65 2.522.0 2.75205IM-633.0± 10 %75 2.520.0 3.5185IM-639.0± 10 %75 2.518.0 3.8176IM-647.0± 10 %75 2.516.0 4.0170IM-656.0± 10 %75 2.515.0 4.4164IM-668.0± 10 %75 2.512.0 4.7156IM-682.0± 10 %75 2.510.0 5.3143IM-6100.0± 10 %65 2.58.0 6.0133IM-6120.0± 10 %650.79 6.0 5.0124IM-6150.0± 10 %650.79 5.4 5.8118IM-6180.0± 10 %650.79 5.0 6.6114IM-6220.0± 10 %650.79 4.77.4112IM-6270.0± 5 %650.79 5.68.2110I R O N C O R E IM-6300.0± 5 %650.79 5.38.7107IM-6330.0± 5 %650.79 5.09.1105IM-6360.0± 5 %650.79 4.79.6102IM-6390.0± 5 %650.79 4.510.0100IM-6430.0± 5 %650.79 4.310.697IM-6470.0± 5 %650.79 4.011.195IM-6510.0± 5 %650.79 3.811.693IM-6560.0± 5 %650.79 3.612.391IM-6620.0± 5 %600.79 3.513.088IM-6680.0± 5 %600.79 3.413.785IM-6750.0± 5 %600.79 3.314.483IM-6820.0± 5 %600.79 3.115.181IM-6910.0± 5 %600.79 2.915.879IM-61000.0± 5 %600.79 2.816.578IM-81100.0± 5 %600.25 2.821.078I R O N C O R E IM-81200.0± 5 %600.25 2.722.076IM-81300.0± 5 %600.25 2.623.075IM-81500.0± 5 %650.25 2.425.072IM-81600.0± 5 %650.25 2.326.070IM-81800.0± 5 %650.25 2.228.068IM-82000.0± 5 %650.25 2.129.067IM-82200.0± 5 %700.25 2.030.066IM-82400.0± 5 %700.25 1.931.064IM-82700.0± 5 %700.25 1.833.062IM-83000.0± 5 %700.25 1.735.061IM-83300.0± 5 %700.25 1.638.058IM-83600.0
± 5 %
70
0.25
1.5
40.0
57
IM
Inductors, Commercial, Molded
Vishay Dale
Document Number: 34030For technical questions contact magnetics@https://www.doczj.com/doc/6c3183689.html,
https://www.doczj.com/doc/6c3183689.html,
* Measured with full length lead. **Rated DC current based on maximum temperature rise as shown in table.
STANDARD ELECTRICAL SPECIFICATIONS
MODEL IND.(μH)TOL.Q MIN.TEST FREQ.L & Q (MHz)
SELF-RESONANT*FREQ. MIN. (MHz)
DCR MAX. (Ohms)
RATED**
DC CURRENT (mA)
IM-968.0± 10%70
2.51
3.0 3.3168I R O N C O R E IM-982.0± 10%65 2.511.7 3.5162IM-9100.0± 10%65 2.510.7 3.8155IM-9120.0± 10%750.799.3
4.7142IM-9150.0± 10%750.798.3
5.3132IM-103900.0± 5%800.25 1.4544.061I R O N C O R E
IM-104300.0± 5%800.25 1.4046.059IM-104700.0± 5%800.25 1.3548.058IM-105000.0± 5%800.25 1.3050.057IM-105600.0± 5%800.25 1.2553.056IM-106200.0± 5%800.25 1.2056.054IM-106800.0± 5%800.25 1.1559.052IM-107500.0± 5%800.25 1.1062.051IM-108200.0± 5%800.25 1.0565.050IM-109100.0± 5%800.25 1.0068.049IM-10
10000.0
± 5%
80
0.25
0.95
72.0
47
MAXIMUM TEMPERATURE RISE
OPERATING
TEMPERATURE RANGE IM-10.10 μH to .47 μH = 35 °C at + 90 °C ambient - 55 °C to + 125 °C 0.56 μH to 1000 μH = 15 °C at + 90 °C ambient - 55 °C to + 105 °C IM-2
0.022 μH to 1.0 μH = 35 °C at + 90 °C ambient - 55 °C to + 125 °C 1.2 μH to 27 μH = 15 °C at + 90 °C ambient - 55 °C to + 105 °C 33 μH to 1000 μH = 15 °C at + 90 °C ambient
- 55 °C to + 105 °C IM-4
0.15 μH to 4.7 μH = 35 °C at + 90 °C ambient - 55 °C to + 125 °C 5.6 μH to 33 μH = 15 °C at + 90 °C ambient - 55 °C to + 105 °C 36 μH to 240 μH = 15 °C at + 90 °C ambient - 55 °C to + 105 °C 270 μH to 1800 μH = 35 °C at + 90 °C ambient
- 55 °C to + 125 °C IM-6
0.1 μH to 2.7 μH = 35 °C at + 90 °C ambient - 55 °C to + 125 °C 3.3 μH to 1000 μH = 15 °C at + 90 °C ambient
- 55 °C to + 105 °C IM-8, IM-9, IM-10
= 15 °C at + 90 °C ambient
- 55 °C to + 105 °C
DESCRIPTION
IM-210 μH
± 10 %
ER
e2
MODEL
INDUCTANCE VALUE
INDUCTANCE TOLERANCE
PACKAGE CODE
JEDEC LEAD (Pb)-FREE STANDARD
Disclaimer Legal Disclaimer Notice
Vishay
All product specifications and data are subject to change without notice.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product.
Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent permitted by law. The product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein, which apply to these products.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay.
The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications.
Product names and markings noted herein may be trademarks of their respective owners.
元器件交易网https://www.doczj.com/doc/6c3183689.html,
Document Number: https://www.doczj.com/doc/6c3183689.html,