100T主要性能与参数
项目?????????????????????????? 数值
最大额定总起重量??????????????? 100000 kg
基本臂最大起重力矩????????????? 3238kN.m
最长主臂+副臂最大起重力矩?????? 1127kN.m
主臂最大起升高度??????????????? 48m????????????????
主臂+副臂最大起升高度?????????? 62.1m??????????
外形尺寸(长×宽×高)??????????? 14550×2750×3750mm
主臂长????????????????????????? 12.8-48m?
副臂长????????????????????????? 18.1m
起重特性表
PATED LIFTING CAPACITY TABLE
单位(UNIT):Kg
说明(NOTE):
●以上作业工况均为支腿全伸,不允许在不打支腿的情况下吊重。(Above working condition is all with outrigger
fully extended,never lift a load on the wheels.)
●表中粗线以上数值是由起重机的结构强度所决定的,粗线以下数值是由起重机整机稳定性所决定的。
(Capacities above the thick line in the table are based on the boom strength,the others,on stablitiy of the complete machine.)
●打好第五支腿时,表中数值适用于圆周360°作业。(With the 5th outrigger fully extended,full 360rotation
is available according to the values listed in the above table.)
●表中所列额定起重量为最大允许值,并包括吊钩重量(100吨吊钩重815Kg,60吨吊钩重560Kg,6吨吊钩重180Kg)
和其他吊具的重量。(The rated lifting capacity listed in the table is max.allowed value,including weight of the hookblock (the hookblock weight is 815kg for 100t,560kg for 60t,180kg for 6t)and other slings.)
●表中所给幅度值,是指吊载后吊钩中心到回转中心的水平距离。(A working radius given in the table is a
horizontal to the axis of the slewing ring when the hookblock is loaded.)
●当实际臂长和工作幅度在两数值之间时,应按最大臂长和幅度值确定起重量。(When actual boom length is between
two values,determing lifting capacity according to bigger boom and radius.)
●在副臂伸出的情况下使用主臂作业时,额定起重量不仅要扣除吊具的重量,还要扣除2250Kg。(Rated lifting
capacity should exclude the weight of clings and 2250kg,when the boom is used with jib extended.)