文档来源:河北美德钢管制造有限公司 www.meidegg.com
ASME容器术语(中英文)
Abrasion, allowance for 磨损,裕量
Accessibility,pressure vessels 压力容器可达性
Access openings 通道孔
Allowance for corrosion, erosion, or abrasion 腐蚀裕量侵蚀或/磨损裕量
Applied linings, tightness 应用衬里密封性
Approval of new materials, 新材料的批准
Articles in Section V 第V卷中的各章
Article 1, T-150 第1章T150
Article 2 第2章
Attachments 附件
lugs and fitting 支耳和配件
lugs for platforms, ladders, etc. 平台,梯子等的支耳
nonpressure parts 非受压件
nozzles 接管
pipe and nozzle necks to vessel walls 在器壁上的管子和接管颈
stiffening rings to shell 壳体上的刚性环
Backing strip 垫板
Bending stress, welded joints 弯曲应力,焊接接头
Bend test 弯曲试验
Blind flanges 盲板法兰
Bolted flange connections 螺栓法兰连接
bolt lands 螺栓载荷
bolt stress 螺栓应力
design of 关于设计
flange moments 法兰力矩
flange stresses 法兰应力
materials 材料
studs 双头螺栓
tightness of 紧密性
types of attachment 附件类型
Bolts 螺栓
Braced and stayed surfaces 支持和支撑面
Brazed connections for nozzles 接管的钎焊连接
Brazed joints, efficiency of 钎焊接头,焊缝系数
maximum service temperature 最高使用温度
strength of 强度
Brazing, cleaning of brazed surfaces 钎焊,钎焊的表面清理
fabrication by 用......制造
filler metal 填充金属
fluxes 钎焊剂
heads into shells 封头接入壳体
operating temperature 操作温度
Buttstraps, curvature 对接盖板,曲率
forming ends of 成型端
thickness and corrosion allowance 厚度和腐蚀裕量
welding ends of 焊接端
Carbon in material for welding 焊接用材料中的碳
Cast ductile iron vessels, design 可锻铸铁容器,设计
pressure-temperature limitations 压力-温度界限
service restrictions 使用限制
Castings 铸件
carbon steel 碳钢
defects 缺陷
impact test 冲击试验
inspection 检查
quality factor 质量系数
specifications 标准
Cast iron circular dished heads 铸铁碟形封头
Cast iron standard parts, small 铸铁标准部件,小件
Cast iron pipe fittings 铸铁管件
Cast iron vessels 铸铁容器
corners and fillets 圆角和倒角
head design 封头设计
hydrostatic test 水压试验
nozzles and fittings 接管和配件
pressure-temperatures limitations 压力-温度界限
Certificate of Authorization for Code Symbol Stamp 规范符号标志的认可证书
Certification of material 材料证明书
Certification of Nondestructive Personnel 无损检验人员证明书
Magnetic Particle Examination 磁粉检验
Liquid Penetrant Examination液体渗透检验
Radiographic Examination 射线超声检验
Ultrasonic Examination 超声检验
Chip marks on integrally forged vessels 整体锻造容器上的缺口标志Circumferential joints alignment tolerance环向连接,组对公差assembling装配
brazing钎焊
vessels subjected to external pressure 承受外压的容器
Clad material, inserted strips 覆层材料,嵌条
examination 检查
Clad plate 复合板
Cleaning ,of brazed surfaces 钎焊表面清理
of welded surfaces 焊接表面
Clearance between surfaces to be brazed 钎焊表面间的间隙Combination, of different materials 不同材料组合
of methods of fabrication制造方法
Computed working pressure from hydrostatic tests 由水试验计算的工作压力
Conical heads 锥形封头
Conical sections 圆锥截面
Connections ,bolted flange (see Bolted flange connections)连接,螺栓法兰(见螺栓法兰连接)
brazed 钎焊
clamp 卡箍
expanded 胀接
from vessels to safety valves 由容器至安全阀
studded 双头螺栓
threaded 螺纹
welded 焊接
Cooling, after postweld heat treating 冷却,焊后热处理
Corrosion allowance 腐蚀裕度
Corrosion resistant linings 防腐蚀衬里
文档来源:河北美德钢管制造有限公司 www.meidegg.com
Corrugated shells 波纹形壳体
Corrugating Paper Machinery 波纹板机械
Cover plates 盖板
on manholes and handholes 在人孔和手孔上的
spherically dished 球形封头
Cracking, stress corrosion 应力腐蚀裂缝
Cutting plates 板材切割
Cylindrical shells, supplementary loading 柱状壳体,附加载荷
thickness 厚度
transition in 过渡段
Data report, guide for preparation 准备数据报告的指南
Defects in welded vessels, repair 修理焊接容器中的缺陷
Definitions 定义
Design, brazed vessels 设计钎焊容器
carbon and low alloy steel vessels 碳钢及低合金钢容器
cast ductile iron vessels 可锻铸铁容器
cast iron vessels 铸铁容器
clad vessels 覆层容器
ferritic steel vessels with properuts
enhanced by heat treatment 经热处理后提高抗拉性能的铁素体钢容器
forged vessels 锻造容器
high-alloy steel vessels 高合金钢容器
loadings 载荷
multichamber vessels 多受压室容器
nonferrous vessels 非铁金属容器
welded vessels 焊接容器
design pressure 设计压力
Diameter exemption 直径的豁免
Dimensions, checking of 尺寸,校核
Discharge of safety valves 安全阀泄放
Dished heads (see formed heads) 碟形封头(见成形封头)
Disks, rupture 防爆膜
Dissimilar weld metal 不同金属的焊接
Distortion, of welded vessels 大变形、焊接容器
supports to prevent 用支撑防止
Drainage, discharge from safety and relief valves 排放,由安全阀和泄压阀泄放
Drop weight tests 落锤试验
Eccentricity of shells 壳体的偏心度
Edges of plates, metal removal from 由加工板边去除金属
tapered 锥度
Efficiency, around openings for welded attachments 焊缝系数,环绕焊接附件孔口
Elasticity, modulus of 弹性模量
Electric resistance welding 电阻焊
Ellipsoidal heads 椭圆封头
Erosion, allowance for 侵蚀裕量
Etching, of sectioned speciments 侵蚀,关于截面试样
solutions for examination for materials 检验材料的溶液
Evaporators 蒸发器
Examination, of sectioned speciments 剖面试样的检验
of welded joints 焊接接头的检验
Exemptions diameter and volume 直径和容积的豁免
Expanded connections 胀接连接
External pressure, tube and pipe 外压管
External pressure vessels 外压容器
allowable working pressure for 许用工作压力
charts 算图
design of heads for 封头设计
joints in shells of 壳体上的接头
reinforcement for openings 开孔补强
stiffening rings in shells 壳体上的刚性环
supports for 支承
thickness of shell 壳体厚度
reducers 变径段
Fabrication, brazed vessels 制造,钎焊容器
Ferritic steels vessels with tensile proper
ties enhanced by heat treatment, design
经热处理后提高抗拉性能的铁素体钢容器,设计
fabrication 制造
head design 封头设计
heat treatment热处理
heat treatment verification tests 热处理验证试验marking 标志
materials 材料
stamping 标记
welded joints 焊接接头
Field assembly of vessels 容器的现场安装
Filler plugs for trepanned holes 锥孔的管塞
Fillet welds 角焊
Fired process tubular heaters 直接火管式加热炉Fitting attachments 附件装配
Flange connections 法兰连接
Flange contact facings 法兰接触面
Flanges 法兰
bolted design 螺柱法兰设计
of formed heads for welding 用于焊接成型封头type of attachment 附件的类型
Flat heads and covers, unstayed 无支撑平封头和盖板reinforcement of openings 开孔补强
Flat spots on formed heads 成型封头上的平坦部分Flued openings 翻边开孔
Forged parts, small 锻造部件,小的
Forged vessels 锻造容器
heat treatment 热处理
localized thin areas 局部薄壁区
welding 焊接
Forgings 锻件
identification of 识别
Ultrasonic Examination 超声检验
Form
manufacturer's data report 制造厂数据报告格式partial report 零部件数据报告
Formed heads 成型封头
flued openings in 封头上翻边开孔
insertion of, welded vessels 插入,焊接容器
joint efficiency 接头系数
knuckle radius 转角半径
length of skirt 直边长度
on welded vessels 在焊接容器上
reinforcement for openings 开孔补强
Forming 成型
ends of shell plates and buttstraps 壳体板和对接搭板端forged heads 锻造封头
shell sections and heads 筒节和封头
Furnaces 炉子
temperatures for postweld head treatment 焊后热处理温度Furnaces for heat treating 热处理炉
temperature control of 炉温控制
Galvanized vessels 镀锌容器
Gasket materials 垫片材料
Girth joints (see circumferential joints) 环缝接头(见环向接头) Handhole and manhole openings 手孔和人孔开孔
Head flange (skirt) length 封头翻边(直边)长度
Head joints 封头接头
brazing 钎焊
welded 焊接
Head openings 封头开孔
entirely in spherical portion 全部在球体部分
Head joints 封头接头
concave and convex 凹面和凸面
flat (see flat heads) 平板(见平封头)
forged 锻造的
formed (see Formed heads) 成型的(见成形封头)
forming 面型
thickness, after forming 厚度,成型之后
Heads, design, conical 封头,设计,锥形
ellipsoidal 椭圆形
hemispherical 半球形
spherically dished 球状碟形
toriconical 带折边的锥形
torispherical 带折边的球形
torispherical, knuckle radius 带折边的球形,转角半径
Heads and shells 封头和壳体
external pressure, out-of-roundness 外压,不圆度
openings through or near welded joints 通过或靠近焊缝处的开孔roundness tolerance 不圆度公差
Heat exchangers 热交换器
Heat treatment 热处理
by fabricator 由制造厂进行
carbon and low-alloy steel vessels 碳钢和低合金钢容器
ferritic steel vessels with tensile properties enhanced by heat treatm ent 经过热处理后提高抗拉性能的铁素体的容器
forged vessels 锻造容器
furnaces 炉子
high-alloy vessels 高合金容器
of test specimens 试样的热处理
verification tests of 热处理验证试验
Hemispherical heads 半球形封头
High pressure vessels 高压封头
Holes 小孔
for screw stays 用于螺丝固定
for trepanning plug sections, refilling 用于穿孔螺塞部分,再填充
telltale 指示孔
unreinforced, in welded joints 不补强,在焊缝上
Hubs, on flanges 高颈,在法兰上
Hydrostatic proof tests 水压验证试验
destructive 破坏性
prior pressure application 在升压之前
Hydrostatic test 水压试验
cast iron vessels 铸铁容器
combined with pneumatic 与气压试验混合的
enameled vessels 搪玻璃容器
external pressure vessels 外压容器
galvanized vessels 镀锌容器
standard 标准
welded vessels 焊接容器
Identification 识别
of forging 锻件
of plates 平板
of welds 焊接
Identification markers, radiographs 识别标志,射线照相
Impact test 冲击试验
certification 证明
properties 性能
specimens 试样
temperature 温度
Inspection 检查
before assembling 组装之前
carbon and low-alloy steel 碳钢和低合金钢
cast ductile iron vessels 可锻铸铁容器
cast iron vessels 铸铁容器
clad vessels 覆层容器
during fabrication 在制造期间
ferritic steel vessels with tensile properties enhanced by heat treatm ent 经过热处理后提高抗拉性能的铁素体的容器
fitting up 组对
forged vessels 锻造容器
heat treatment, forgings 热处理,锻件
high-alloy steel vessels 高合金钢容器
magnetic particle 磁粉
material 材料
nonferrous vessels 非铁金属容器
plate 板材
postweld heat treatment 焊后热处理
pressure vessels, accessibility 压力容器,可达性
quality control 质量管理
sectioning of welded joints 焊接接头的剖面检验
spot examination 抽样检查
steel castings 铸钢件
surfaces exposed and component parts 暴露的表面和元件部分
test specimens 试样
vessels 容器
vessels exempted from 免检容器
welded vessels 焊接容器
Inspection openings 检查孔
Inspectors 检查师
access to plant 在厂内应有的便利
control of stamping 打印管理
duties 职责
facilities 装备
qualification 资格
reports 报告
Installation 安装
pressure-relieving devices 泄压装置
pressure vessel 压力容器
Integral cast iron dished heads 整体铸铁碟形封头
integrally finned tubes 整体翅片管
Internal structures 内部构件
Jacketed vessels 夹套容器
Joints 接头
brazed 钎焊
circumferential (see Circumferential joints) efficiency, brazed 环缝(见环向接头)系数,钎焊
welded 焊接
electric resistance, butt welding 电阻,对接焊
in cladding and applied linings 在覆层及衬里
in vessels subjected to external pressure 在承受外压的容器
lap (see Lap joints) 搭接(见搭接接头)
longitudinal (see Longitudinal joints) 纵向(见纵向接头)
tube-to-tubesheet 管子对管板
Jurisdictional Review 权限审查
Knuckles 过渡圆角
radius 半径
transition section 变径段
Lap joints 搭接接头
amount of overlap 搭接量
brazed 钎焊
longitudinal under external pressure 在外压作用下纵向的
welded 焊接
Laws Covering Pressure Vessels 涉及压力容器的法规
Lethal gases or liquids 致命的气体或液体
Ligaments, efficiency of 孔带,系数
Limitation on welded vessels 焊接容器的限制
Limit of out-of-roundness of shells 壳体不圆度的限制
Linings 衬里
corrosion resistant 抗腐蚀
Liquid penetrant examination 液体渗透检验
Loadings 载荷
Local postweld heat treatment 局部焊后热处理
Longitudinal joints 纵向接头
alignment tolerance 对准公差
brazing 钎焊
vessels subjected to external pressure 承受外压的容器
Low-temperature operation 低温操作
Low-temperature vessels brazed 低温容器,钎焊
for gases and liquids 用于气体和液体
impact test requirements 冲击试验要求
impact test, when not required 冲击试验,当不要求时
marking 标志
materials 材料
testing of materials 材料试验
Lugs for ladders, platforms, and other 梯子,平台及其它附件的支耳Magnetic particle inspection 磁粉检查
Manholes, and handholes 人孔,手孔
cover plate for 盖板
minimum vessel diameter requiring 所需最小容器直径
Manufacture, responsibility of 制造者,职责
Manufacturer's Data Report (see Data Report) 制造厂数据报告(见数据报告)
Manufacturer's stamps 制造厂的印记
Marking castings 标志,铸件
materials 材料
plates 板材
standard pressure parts 标志受压件
valves and fittings 阀门和配件
with Code symbol 带有规范符号
Markings, transfer after cutting plates 标志,板材切割以后的转移Materials, approval of new 材料,新材料的批准
approval of repairs 修补的批准
brazed vessels 钎焊容器
carbon and low-alloy steel vessels 碳钢和低合金钢容器
cast ductile iron 可锻铸铁
castings 铸铁
cast iron vessels 铸铁容器
certification 合格证
clad vessels 覆层容器
combination of 组合材料
ferritic steel vessels with tensile properties enhanced by heat treatm ent 经热处理后提高抗拉性能的铁素体钢容器
forged vessels 锻造容器
for nonpressure parts 非受压元件
heat treatment of 热处理
high-alloy steel vessels 高合金钢容器
inspection of 检查
nonferrous vessels 非铁金属容器
pipe and tube 管子
plate 板
rods and bars 杆和棒
specification for 标准
standard pressure, parts 标准受压元件
unidentified 未鉴别的
use of over thickness listed in Section Ⅱ采用超过列于第Ⅱ卷表中的厚度welded vessels 焊接容器
Measurement, 测量
dimensional 尺寸
of out-of-roundness of shells 壳体不圆度
Metal temperature determination 金属温度,确定
control of 控制
Mill undertolerance 钢厂负公差控制
Minimum thickness of plate 板材的最小厚度控制
Miscellaneous pressure parts 其它受压件控制
Multichamber vessels design 多承压室容器,设计
Multiple duplicate vessels 多个相同的容器
Multiple safety valves 多个安全阀
Nameplates 铭牌
New materials 新材料
Noncircular vessels 非圆形容器
ligament efficiency 孔带系数
nomenclature 术语
obround design 长圆形设计
rectangular design 矩形设计
reinforcement 补强
examples 实例
Nonpressure parts, attachment of 非受压元件的连接
Notch ductility test 缺口韧性试验
Nozzle openings, reinforced 接管开孔,补强的
unreinforced 非补强的
vessels subjected to external pressure 承受外压得容器
Nozzles attachment of to shell 接管,与壳体的连接
minimum thickness of neck 缩颈的最小厚度
(see also Connections)(也可见连接件)
Nuts and washers 螺母和垫圈
Offset of edges of plates at joints 在接头处板边的偏差
Openings adjacent to welds 开孔,邻近焊缝
closure of 封闭
for connections to brazed vessels 用于对钎焊容器的连接
for drainage 用于排放
head (see Openings head and shell) 封头(见开孔,封头和壳体)
in flat heads 在平板封头上
inspection 检查
manhole (see Manholes) 人孔(见人孔)
nozzle (see Nozzle opening) 接管(见接管开孔)
shell (see Openings, head and shell) 壳体(见开孔,封头和壳体) through welded joints 通过焊接接头
Openings, head and shell, computation of 开孔,封头和壳体,计算not requiring additional reinforcement 不需要附加补强
reinforced, size 补强,尺寸
reinforcement for adjacent openings 邻近开孔的补强
reinforcement of 补强
requiring additional reinforcement 需要附加补强
shapes permissible 许用形式
unreinforced, size 不补强的,尺寸
Outlets, discharge, pressure relieving devices 排放口,出料,泄压装置Out-of-roundness 不圆度
Overpressure limit for vessels 容器的超压极限
Partial data report, manufacturer's 零部件数据报告,制造厂的
Parts, miscellaneous 部件,各种各样的
Peening 捶击
Pipe connections openings for 管子的连接,用于开孔
Pipe fittings vessels built of 管子配件,制造的容器
Pipe and tubes 各类管子
Pipe used for shells 用作壳体的管子
piping external to vessel 容器外的管子
Plate, curvature 板,曲率
measurement, dimensional check 测量,尺寸校核
Plate edges cutting 板边,切割
exposed left unwelded 留下不予焊接的显露部分
inspection of 检查
Plates 平板
alignment 找准
cover 盖板
cutting 切割
forming 成型
heat treatment 热处理
identification 标志
impact test 冲击试验
inspection 检查
laying out 划线
less than 6 mm thickness 厚度小6mm
markings transfer after cutting 标志,在切割以后的转移minimum thickness 最小厚度
repair of defects 缺陷修理
specifications 标准
structural carbon steel 结构碳钢
Plug welds 塞焊
Pneumatic test 气压试验
pressure 压力
yielding 屈服
Porosity welded joints 气孔,焊接接头
Porosity charts 气孔图
Postheat treatment 后热处理
connections for nozzles and attachments 用于接管和附件的连接cooling after 随后的冷却
furnace temperature 炉温
inspection 检查
local 局部
requirements 要求
temperature range 温度范围
welded vessels 焊接容器
Preheating 预热
Preparation of plates for welding 焊接板材的准备
pressure, design 压力,设计
limits 极限
(see also Working pressure, allowable) (也可见工作压力,许用) Pressure parts miscellaneous 受压件,其它的
Pressure relieving devices 泄压装置
discharge 排放
installation and operation 安装和运转
rupture disks 防爆模
setting 整定
Pressure vessels 压力容器
exempted from inspection 免检
Produce form of Specification 产品技术条件
Proof test hydrostatic (see Hydrostatic proof test) 验证试验,水压(见水压试验)
Qualification 评定
of brazers 钎焊工
of welders 焊工
of welding procedure 焊接工艺
Quality Control System 质量保证体系
Quenching and tempering 淬火及回火
Quick-actuating closures 快开盖
Radiograph factor 射线照相系数
Radiographing 射线照相
examination by 检查
partial 部分
quality factors 质量系数
requirements 要求
spot examination 抽样检查
retests 重新试验
thickness, mandatory minimum 规定最小厚度
Radiographs, acceptance by inspector 射线照相,由检查员认为合格gamma rays, radium capsule γ射线,装镭的盒子
interpretation by standard procedure 由标准程序的说明
rounded indications 圆形显示
Reaming holes for screw stays 为固定螺钉用的铰孔
Reducer sections, rules for 变径段,规程
Reinforcement 补强
defined limits 规定的范围
head and shell openings 封头及壳体开孔
large openings 大开孔
multiple openings 多个开孔
nozzle openings 接管开孔
of openings in shells, computation of 壳体上开孔,计算
openings subject to rapid pressure fluctuation 经受压力突然波动的开孔Fluctuation 经受压力突然波动的开孔
strength 强度
Relief devices 泄放装置
(see also Pressure relieving devices, Safety and relief Valves)(也可见泄压装置,安全阀和泄压阀)
Relieving capacity of safety valves 安全阀排量
Repairs, approval of defects in material 修理,材料中缺陷的认可defective Brazing 有缺陷的钎焊
defects in forgings 锻件中的缺陷
defects in welds 焊缝中的缺陷
Responsibility of manufacturer 制造者的职责
Retention of Records 记录的保存
Radiographs 射线照相
Manufacturer's Data Reports 制造厂的数据报告
Retests, frogings 复试,锻件
impact specimens 冲击试样
joints, welded 接头,焊接
Rods, bars, and shapes 杆棒喝型材
Rolled parts, small 轧制件,小件
Rupture disks 爆破模
Safety 安全性
safety relief, and pressures relief valves, adjustable blow down, cap acity certification 安全泄放和泄压阀,可调节的泄放,排放量证明
capacity, conversion 排量,换算
connection to vessels 连接至容器
construction 结构
discharge pipe 排放管
indirect operation 间接操作
installation 安装
installation on vessels in service 容器在役时的安装liquid relief 液体泄放
marking 标志
minimum requirements 最低要求
pressure setting 压力整定
spring loaded 受载弹簧
springs, adjustment 弹簧,调节
stop valves adjacent to 邻近的截止阀
test 试验
protective devices 防护装置
for unfired steam boiler 对非直接火蒸气锅炉
Scope 适用范围
sectioning, closing holes left by 解剖,解剖孔的封闭etching plugs taken 解剖样的侵蚀
examination by 检查
Service restriction 使用限制
Shapes, special 形状,特殊
Shell plates, forming ends of 壳体用材料,封头成型Shells 壳体
allowable working pressure 许用工作压力computation of openings in 开孔计算
forming 成型
made from pipe 由管子制造的
stiffening rings 刚性环
thickness 厚度
Transition section 过渡段
Sigma-phase formation σ相的形成
Skirts length on heads 直边、封头上的长度
support of vessels 裙座,容器支撑
Slag inclusion welds 焊缝中的夹渣
Special constructions 特殊结构
Specification for materials 材料标准
Spherical sections of vessels 容器的球形部分
Spot examination of welded joints 焊接接头的抽样检查
Springs for safety valves 安全阀的弹簧
Stamping location of 打印位置
multipressure vessels 多重压力容器
omission of 省略
safety valves 安全阀
with Code symbol 带有规范标记
Stamps, certificate of authorization 钢印,授权
low stress 低压力
not to be covered 不应覆盖
to be visible on plates 在板上可见
Static head, in setting safety valves, effect of on limiting stresses 静压头,在整定安全阀时,影响,对极限应力
Stayed surfaces 支撑表面
Staying formed heads 成型封头的支撑
Stays and staybolts, adjacent to edges of staybolted surface 支撑件及拉撑螺栓,邻近用螺栓拉撑得表面周边处
allowable stress 许用应力
area supported 支撑面
dimensions 尺寸
ends 端部
location 位置
pitch 节距
screw, holes for 螺孔
upset for threading 为车制螺纹的镦粗
welded 焊接的
Steam generating vessels, unfired 蒸汽锅炉,非直接火
Steel, carbon content 钢,含碳量
Stenciling plates for identification 在板材上打印标志
Stiffening rings, attachment to shell 刚性环,和壳体的装配
for vessels under external pressure 用于外压容器
Stiffness, support of large vessels for 刚性,大容器支座
Stop valves 截止阀
adjacent to safety and relief valves 邻近于安全和泄压阀
Strength of brazed joints 钎焊接头的强度
Stress corrosion cracking 应力腐蚀裂缝
Stress values, attachment weld 应力值,连接焊缝
basis for establishing 确定的基础
carbon and low-alloy steel 碳钢和低合金钢
cast iron 铸铁
ferritic steels with tensile properties enhanced by heat treatment 经热处理后提高抗拉性能的铁素体刚
high-alloy steel高合金钢
nonferrous metals 非铁金属
Stud bolt threads 双头螺栓螺纹
Studded connections 双头螺纹连接
Supplementary design formulas 补充设计公式
Supports, design 支座,设计
pressure vessels 压力容器
temperature free movement under 在温度下活动不受约束
types of steel permissible for 容许的钢材类型
vessels subjected to external pressure 承受外压的容器
Surface Weld Metal Buildup 金属堆焊表面
Tables, effective gasket width b 表,有效垫片宽度b
gasket materials and contact facings 垫片材料和接触面
maximum allowable efficiencies for arc and gas welded joints 电弧焊和气焊接头的最大许用系数
minimum number of pipe threads for connections 管螺纹连接的最少螺纹牙数
molecular weights of gases and vapors 气体和蒸汽的分子量
of stress values, carbon and low-alloy steel 应力值,碳钢和低合金钢cast iron 铸铁
cast ductile iron 可锻铸铁
ferritic steels with tensile properties enhanced by heat treatment经热处理后提高抗拉性能的铁素体钢
high-alloy steel 高合金钢
nonferrous metals 非铁金属
welded carbon low-alloy pipe and tubes 焊接低合金碳钢管
of values factor K系数K值
常用机械专业英语对照 Cutting: 切割 socket weld承插焊接 fillet weld角焊,填角焊 branch connection分支接续 fabrication tolerance.制造容差 local heat treatment 局部热处理 threaded pipe螺纹管 seal welding.密封焊接 flange joint 凸缘接头 undercut 底切 feeder馈电线 conduit outlet电线引出口 seal fitting 密封接头, 密封配件 Screw thread lubricant螺纹润滑剂 Seal: 绝缘层 weld reinforcement 焊缝补强 lock washer 锁紧[止动, 防松]垫圈electrical panel.配电板,配电盘 nipple螺纹接头 zinc plated.镀锌的 ring joint 环接, 围缘接合 bolt 螺栓 control: 控制器 National Electrical Code 全国电气规程master schedule 主要图表, 综合图表, 设计任务书, 主要作业表 torque wrench 转矩扳手 job site 施工现场 flange connection.凸缘联接 Hard hat:安全帽 Goggles:护目镜 stockpile贮存 packing list装箱单 crate: 柳条箱 purchased material list原材料进货单 back-feed反馈 wire coil线盘,线卷, NPT thread. 美国标准锥管螺纹 cable gland 电缆衬垫 terminal block线弧, 接头排接线盒, 接线板, 线夹 power drill机械钻 connector. 接线器 insulated sleeve绝缘套管 wire connector接线器 wire terminal电线接头 control wiring控制线路motor lead电动机引出线 power wiring电力布线 tender document.提供证件 orifice plate.挡板 nut 螺母 flange gasket 法兰垫片 dimensional inspection 尺寸检验 burn through 烧蚀 piping system.管道系统 reinforcement of weld加强焊缝fabrication.制造 dye penetrant examination染料渗透试验法magnetic particle examination 磁粉检验girth weld环形焊缝 cement lined piping 水泥衬里 weld joint 焊缝, 焊接接头 spool drawing 管路图, 管路详图 spot test 抽查, 当场测试 butt weld 对接焊缝 Random Radiography随机射线照相检查radiographic examination 射线照相检查assembly.装配 erection 架设 examination试验 cable tray.电缆盘 rigid steel conduit 钢制电线管 power control 功率控制 arc welding 电弧焊 control cable控制电缆操纵索 normal bend 法向[法线]弯管 cable glands: 电缆衬垫 exfoliation剥落 power receptacle 电力插座 grounding conductor 接地导体 lighting fixture照明器材 junction box 分线箱 race way 电缆管道 terminal box接线盒 distribution board配电盘, 配电屏receptacle 插座 tumble switch.翻转开关,拨动式开关cathodic protection system 阴极保护系统Circuit breaker断路开关 amplifier panel 放大器盘 control console 控制台 electrical material电气材料convenience receptacle.电源插座 cable gland 电缆衬垫
压力容器常用词汇和缩写中英文对照
压力容器常用词汇和缩写中英文对照 化工设备常用词汇和缩写中英文对照2008-7-26 缩写/ 英文 /中文 AB Anchor Bolt 地脚螺栓 Abs Absolute 绝对的 Abs Abstract 文摘、摘要 A/C Account 帐、帐目 AC Alternating Current 交流电 Add Addendum 补充、补遗、附录 ADL Acceptable Defect Level 允许的缺陷标准 Adpt Adapter 连接器、接头 AE Absolute Error 绝对误差AET Acoustic Emission Examination 声发射检验 AISC American Institute of Steel Construction 美国钢结构学会 AISI American Iron and Steel Institute 美国钢铁学会 AL Aluminium 铝 Alk Alkaline 碱的、强碱的 ALM Alarm 报警 Alt Alternate 交流、改变 Amb Ambient 周围的 Amt Amount 数量、金额 Anh Anhydrous 无水的 ANSI American National Standard Institute 美国国家标准学会
API American Petroleum Institute 美国石油学会 App Apparatus 设备 App Appendix 附录、补遗 Appl Applied 应用的 Appl Applicable 适当的、合适的 Approx Approximate 大约、近似 Appx Appendix 附录、附件 Arrgt Arrangement 布置 AS Alloy steel 合金钢 Asb Asbestos 石棉 ASL Above Sea Level 海拔高度 ASM American Society for Metals 美国金属学会ASME American Society of Mechanical Engineers 美国机械工程师学会 Assem Assembly 装配 ASTM American Society for Testing and Materials 美国材料试验学会 Atm Atmosphere 大气 atm Atmosphere pressure 大气压 Auto Automatic 自动 Aux Auxiliary 辅助设备、辅助的 Avail Available 有效的、可用的 Avg Average 平均 AW Arc welding 电弧焊 AW Automatic Welding 自动焊 A.W.G. American Wire Gauge 美国线规
美国ASME标准目录 ASME B1.1-1989(R2001)统一英制螺纹 ASME B1.12-1987(R1998)5级过盈配合螺纹 ASME B1.20.3-1976(R1998)干密封管螺纹(英制) ASME B1.20.5-1991(R1998)干密封管螺纹的检测(英制) ASME B1.20.7-1991(R1998)软管接头螺纹(英制) ASME B1.3M-1992(R2001)螺纹尺寸验收的检测体系—英寸和米制螺纹(UN、UNR、UNJ、M和MJ) ASME B1.5-1997 爱克母(ACME)螺纹 ASME B1.8-1988(R1994) 矮牙爱克母螺纹 ASME B107.46-1998 螺柱、螺钉和管道提取器:安全要求 ASME B16.10-1992 阀门的面至面和端至端尺寸 ASME B16.10-2000 阀门的面对面和端至端的尺寸 ASME B16.11-1996 承插焊式和螺纹式锻造管件 ASME B16.11-2001(2002年颁布)承插焊式和螺纹式锻造管件 ASME B16.1-1998 铸铁管法兰和法兰管件(25、125和250磅级) ASME B16.14-1991 钢铁管螺纹管堵、内外螺丝和锁紧螺母 ASME B16.15-1985 (R1994)铸青铜螺纹管配件(125和250磅级) ASME B16.18-1984(R1994)铸铜合金钎焊接头受压管配件 ASME B16.20a-2000 管道法兰用环垫式、螺旋缠绕式和夹层式金属垫片 ASME B16.21-1992 管法兰用非金属平垫片 ASME B16.22-2001 锻压铜和铜合金钎焊连接压力管配件 ASME B16.24-2001 铸铜合金管法兰和法兰连接管配件 ASME B16.25-1997 对焊端部 ASME B16.28-1994 锻轧钢制对接焊小弯头半径弯头和180。弯头 ASME B16.3-1998 可锻铸铁螺纹管件(150和300磅级) ASME B16.33-2002 压力在125psi以下燃气系统用手动金属制燃气阀门(规格从NPS1/2至NPS2)ASME B16.34a-1998 法兰、螺纹和焊接端连接的阀门 ASME B16.36-1996 孔板法兰 ASME B16.38-1985(R1994)气体分配用大金属阀 ASME B16.39-1998 可锻铸铁螺纹端管套节150、250和300磅级 ASME B16.40-1985(R1994)气体分配系统中手动热塑切断器和阀门 ASME B16.4-1998 灰铸铁螺纹管件(125和250磅级) ASME B16.42-1998 球墨铸铁管法兰和法兰连接管配件 ASME B16.44a-1997 室内管道系统用手动操作金属气阀 ASME B16.47a-1998 大直径管钢制法兰(NPS 26~NPS 60) ASME B16.48-1997 钢制管线盲板 ASME B16.5-2003 管法兰和法兰管件 ASME B16.9-1993 工厂制造的锻钢对焊管件 ASME B16.9-2001 工厂制造的锻轧制对焊管配件 ASME B18.10-82(R2000) 轨道螺栓和螺母 ASME B18.13a-1998 螺钉和垫圈组件
常用工程英语词汇 Construction Site 建筑工地 Apologize for any inconvenience caused during building operation 对施工期间带来的不便表示歉意。 Danger of death. Keep out. 生命危险,严禁入内。 Danger,building site, keep out 工地危险,禁止入内。 Danger,evacuation 危险,请走开 Dangerous structure, this bridge is unsafe 危险结构,该桥不安全。 Hot work in progress 正在施工 No persons allowed beyond this point 任何人不许越过此处。 Safety footwear.穿安全靴 Safety helmets must be worn on this site 此工地必须戴安全帽。 Site entrance, dangerous 工地入口,危险 Slow, site entrance 工地入口请慢行 This button has been moved for remedial work 该按钮已卸下拿去修理。 This is just for construction personnel 仅供施工人员使用。 This lift is only for construction personal 此电梯仅供施工人员使用。 This work will be completed by the end of this year. Thank you fo r your patience during the inevitable disruption 此工程于年底完工,感谢你施工期间的宽容大度。 We apologize for any inconvenience caused during this works 对施工期间引起的不便表示歉意。 Working overhead 上面在施工
压力容器专业词汇 A B类 Category A B 安全阀 Safety valve 安装 Installation 鞍式支座 saddle support 凹面 concave 半球形封头 Hemispherical heads 棒 bars 保温支撑 insulation support 爆炸性 explosive 泵 pump 变径段 reducers 标记 stamping 标志 marking 标志的移植 Transfering marking 波纹板 Corrugating Paper 补强管 reinforcing nozzle 补强圈 reinforcing ring 不锈钢 stainless steel 不圆度 out-of-roundness 材料 materials 材料证明书 Certification of material 超声检验 Ultrasonic Examination 衬里 Linings 成型 Forming 成型封头 Formed heads 尺寸 Dimensions 翅片管 finned tubes 冲击试验 impact test 储罐 storage tank 传热面积 heat transfer surface 磁粉检验 Magnetic Particle Examination 次要应力 secondary stress 粗糙度 roughness 淬火 Quenching 带折边的锥形 toriconical 弹簧 springs 弹簧垫圈 spring washer 弹性模量 modulus of Elasticity 挡板 baffle plate 低合金钢容器 low alloy steel vessels 低温容器 Low-temperature vessels 地震烈度 seismic intensity 垫板Backing strip 垫片gasket 垫圈washer 碟形封头Dished heads 顶丝jbckscrew 定距管spacer 定位销pin dowel 定义Definitions 毒性toxicity 镀锌容器Galvanized vessels 锻件Forgings 对焊法兰welding neck flange 耳座lug 阀门valves 法兰flanges 法兰接触面Flange contact facings 防冲板impingement baffle 防腐蚀衬里Corrosion resistant linings 防火fire protection 防涡流挡板vortex breaker 非受压件nonpressure parts 非圆形容器Noncircular vessels 峰值应力peak stress 腐蚀裕量corrosion allowance 附加载荷supplementary loading 附件attachments 复合板Clad plate 覆层容器clad vessels 盖板Cover plates 杆rods or bars 过渡段transition in 过渡圆角Knuckles 焊后热处理after postweld heat treating 焊接工艺welding procedure specification 焊接接头welding joints 焊接系数welding coefficient 厚度thickness 滑动的sliding 环向应力hoop stress 回火tempering 基本地震加速度basic seismic acceleration 基本分压basic wind pressure
化工设备 泵pump 轴流泵axial flow pump 真空泵vacuum pump 屏蔽泵canned pump 柱塞泵plunger pump 涡轮泵turbine pump 涡流泵vortex pump 离心泵centrifugal pump 喷射泵jet pump 转子泵rotary pump 管道泵inline pump 双作用往复泵double action reciprocating pump 计量泵metering pump 深井泵deep well pump 齿轮泵gear pump 手摇泵hand(wobble) pump 螺杆泵screw (spiral) pump 潜水泵submersible pump 斜转子泵inclined rotor pump 封闭式电磁泵hermetically sealed magnetic drive pump 气升泵air-lift-pump 轴承bearing 叶轮impeller 虹吸管siphon 高压容器high pressure vessel 焚化炉incinerator 火焰清除器flame arrester 工业炉furnace 烧嘴burner 锅炉boiler 回转窑rotary kiln 加热器heater 电加热器electric heater 冷却器cooler 冷凝器condenser 换热器heat exchanger 反应器reactor 蒸馏釜still 搅拌器agitator 混合器mixer 静态混合器static mixers 管道混合器line mixers 混合槽mixing tanks
化工设备常用词汇和缩写中英文对照 缩写/ 英文/中文 AB Anchor Bolt 地脚螺栓 Abs Absolute 绝对的 Abs Abstract 文摘、摘要 A/C Account 帐、帐目 AC Alternating Current 交流电 Add Addendum 补充、补遗、附录 ADL Acceptable Defect Level 允许的缺陷标准 Adpt Adapter 连接器、接头 AE Absolute Error 绝对误差 AET Acoustic Emission Examination 声发射检验 AISC American Institute of Steel Construction 美国钢结构学会 AISI American Iron and Steel Institute 美国钢铁学会 AL Aluminium 铝 Alk Alkaline 碱的、强碱的 ALM Alarm 报警 Alt Alternate 交流、改变 Amb Ambient 周围的 Amt Amount 数量、金额 Anh Anhydrous 无水的 ANSI American National Standard Institute 美国国家标准学会 API American Petroleum Institute 美国石油学会 App Apparatus 设备 App Appendix 附录、补遗 Appl Applied 应用的 Appl Applicable 适当的、合适的 Approx Approximate 大约、近似 Appx Appendix 附录、附件 Arrgt Arrangement 布置 AS Alloy steel 合金钢 Asb Asbestos 石棉 ASL Above Sea Level 海拔高度 ASM American Society for Metals 美国金属学会 ASME American Society of Mechanical Engineers 美国机械工程师学会Assem Assembly 装配 ASTM American Society for Testing and Materials 美国材料试验学会Atm Atmosphere 大气 atm Atmosphere pressure 大气压 Auto Automatic 自动 Aux Auxiliary 辅助设备、辅助的 Avail Available 有效的、可用的 Avg Average 平均
压力容器常用词汇和缩写中英文对照 化工设备常用词汇和缩写中英文对照2008-7-26 缩写/ 英文/中文 AB Anchor Bolt 地脚螺栓 Abs Absolute 绝对的 Abs Abstract 文摘、摘要 A/C Account 帐、帐目 AC Alternating Current 交流电 Add Addendum 补充、补遗、附录 ADL Acceptable Defect Level 允许的缺陷标准 Adpt Adapter 连接器、接头 AE Absolute Error 绝对误差 AET Acoustic Emission Examination 声发射检验 AISC American Institute of Steel Construction 美国钢结构学会 AISI American Iron and Steel Institute 美国钢铁学会 AL Aluminium 铝 Alk Alkaline 碱的、强碱的ALM Alarm 报警 Alt Alternate 交流、改变 Amb Ambient 周围的 Amt Amount 数量、金额 Anh Anhydrous 无水的 ANSI American National Standard Institute 美国国家标准学会 API American Petroleum Institute 美国石油学会 App Apparatus 设备 App Appendix 附录、补遗 Appl Applied 应用的 Appl Applicable 适当的、合适的Approx Approximate 大约、近似 Appx Appendix 附录、附件 Arrgt Arrangement 布置 AS Alloy steel 合金钢 Asb Asbestos 石棉 ASL Above Sea Level 海拔高度 ASM American Society for Metals 美国金属学会 ASME American Society of Mechanical Engineers 美国机械工程师学会
ASME标准中文版 ASME B16.20-1993 管法兰用环连接式.螺旋缠绕式及夹套式金属垫片 ASME B16.21-1992 管法兰用非金属平垫片 ASME SECTION-I ASME锅炉及压力容器规范第Ⅰ卷动力锅炉建造规范2004版+05+06增补 ASME SECTION-II A ASME锅炉及压力容器规范第Ⅱ卷A篇铁基材料2004版+05+06增补 ASME SECTION-II B ASME锅炉及压力容器规范第Ⅱ卷B篇非铁基材料2004版+05+06增补 ASME SECTION-II C ASME锅炉及压力容器规范第Ⅱ卷C篇焊条焊丝及填充材料2004版+05+06增补ASME SECTION-II D ASME锅炉及压力容器规范第Ⅱ卷D篇材料性能2004版+05+06增补 ASME SECTION-IV ASME锅炉及压力容器规范第Ⅳ卷采暖锅炉建造规范2004版+05+06增补 ASME SECTION-V ASME锅炉及压力容器规范第Ⅴ卷无损检测2004版+05+06增补 ASME SECTION-III NB 1995版ASME规范Ⅲ卷核动力装置设备制造准则一册NB分卷一级设备ASME SECTION-III NC 1995版ASME规范Ⅲ卷核动力装置设备制造准则一册NC分卷二级设备ASME SECTION-III NCA ASME规范Ⅲ卷(89版) 核动力设备建造规则NCA卷一册与第二册之总要求ASME SECTION-III ND 1995版ASME规范Ⅲ卷核动力装置设备制造准则一册ND分卷三级设备ASME SECTION-III NF 1995版ASME规范Ⅲ卷核动力装置设备制造准则一册NF分卷设备支承结构ASME SECTION-IX ASME锅炉及压力容器规范第Ⅸ卷焊接及钎焊评定标准2004版+05+06增补 ASME SECTION-VI ASME锅炉及压力容器规范第Ⅵ卷采暖锅炉维护和运行推荐规则2004版+05+06增补ASME SECTION-VII ASME锅炉及压力容器规范第Ⅶ卷动力锅炉维护推荐导则05年版 ASME SECTION-VIII-1 ASME锅炉及压力容器规范第Ⅷ卷1压力容器建造规则2004版+05+06增补 ASME SECTION-VIII-2 ASME锅炉及压力容器规范第Ⅷ卷2压力容器另一规则2004版+05+06增补 ASME SECTION-VIII-3 ASME锅炉及压力容器规范第Ⅷ卷3高压容器建造另一规则2004版+05+06增补ASME SECTION-XII ASME锅炉及压力容器规范第Ⅻ卷运输罐的建造和连续使用规则2004版+05+06增补CODE CASES 规范案例2004年版 TCED 41001-2000 ASME 压力容器规范实施导则 ASME B31.1-2004版动力管道 ASME B31.3-2004版工艺管道 ASME规范压力管道及管件B31、B16系列标准(上册)含5个标准 1.ASME B31.4-1998版液态烃和其他液体管线输送系统 2.ASME B31.5-1992(R1994) 制冷管道 3.ASME B31.8-1999版输气和配气管道系统 4.ASME B31.9-1996版建筑管道规范 5.ASME B31.11a-1989(R1998)版浆液输送管道系统 ASME B31G-1991版确定已腐蚀管线剩余强度的手册 (对ASME B31压力管道规范的补充文件) ASME规范压力管道及管件B31、B16系列标准(下册)含10个标准 1.ASME B16.1-1998版铸铁管法兰和法兰管件(25、125和250磅级) 2.ASME B16.3-1998版可锻铸铁螺纹管件(150和300磅级) 3.ASME B16.4-1998版灰铸铁螺纹管件(125和250磅级) 4.ASME B16.9-1993版工厂制造的锻钢对焊管件 5.ASME B1 6.10-1992版阀门的面至面和端至端尺寸 6.ASME B16.11-1996版承插焊式和螺纹式锻造管件 7.ASME B16.14-1991版钢铁管螺纹管堵、内外螺丝和锁紧螺母 8.ASME B16.28-1994版锻轧钢制对接焊小弯头半径弯头和180度弯头 9.ASME B18.2.1a-1999版方头及六角头螺栓和螺钉 10.ASME PTC25-1994 压力泄放装置性能试验规范
ASME标准中文版 ASME 管法兰用环连接式.螺旋缠绕式及夹套式金属垫片 ASME 管法兰用非金属平垫片 ASME SECTION-I ASME锅炉及压力容器规范第Ⅰ卷动力锅炉建造规范2004版+05+06增补 ASME SECTION-II A ASME锅炉及压力容器规范第Ⅱ卷 A篇铁基材料2004版+05+06增补 ASME SECTION-II B ASME锅炉及压力容器规范第Ⅱ卷 B篇非铁基材料2004版+05+06增补 ASME SECTION-II C ASME锅炉及压力容器规范第Ⅱ卷C篇焊条焊丝及填充材料2004版+05+06增补ASME SECTION-II D ASME锅炉及压力容器规范第Ⅱ卷 D篇材料性能2004版+05+06增补 ASME SECTION-IV ASME锅炉及压力容器规范第Ⅳ卷采暖锅炉建造规范2004版+05+06增补 ASME SECTION-V ASME锅炉及压力容器规范第Ⅴ卷无损检测2004版+05+06增补 * ASME SECTION-III NB 1995版ASME规范Ⅲ卷核动力装置设备制造准则一册NB分卷一级设备 ASME SECTION-III NC 1995版ASME规范Ⅲ卷核动力装置设备制造准则一册NC分卷二级设备 ASME SECTION-III NCA ASME规范Ⅲ卷(89版) 核动力设备建造规则NCA卷一册与第二册之总要求 ASME SECTION-III ND 1995版ASME规范Ⅲ卷核动力装置设备制造准则一册ND分卷三级设备 ASME SECTION-III NF 1995版ASME规范Ⅲ卷核动力装置设备制造准则一册NF分卷设备支承结构ASME SECTION-IX ASME锅炉及压力容器规范第Ⅸ卷焊接及钎焊评定标准2004版+05+06增补 ASME SECTION-VI ASME锅炉及压力容器规范第Ⅵ卷采暖锅炉维护和运行推荐规则2004版+05+06增补ASME SECTION-VII ASME锅炉及压力容器规范第Ⅶ卷动力锅炉维护推荐导则 05年版 ASME SECTION-VIII-1 ASME锅炉及压力容器规范第Ⅷ卷1压力容器建造规则2004版+05+06增补 ASME SECTION-VIII-2 ASME锅炉及压力容器规范第Ⅷ卷2压力容器另一规则2004版+05+06增补 ~ ASME SECTION-VIII-3 ASME锅炉及压力容器规范第Ⅷ卷3高压容器建造另一规则2004版+05+06增补 ASME SECTION-XII ASME锅炉及压力容器规范第Ⅻ卷运输罐的建造和连续使用规则2004版+05+06增补CODE CASES 规范案例 2004年版 TCED 41001-2000 ASME 压力容器规范实施导则 ASME 版动力管道 ASME 版工艺管道 ASME规范压力管道及管件B31、B16系列标准(上册)含5个标准 版液态烃和其他液体管线输送系统 (R1994) 制冷管道 $ 版输气和配气管道系统 版建筑管道规范 (R1998)版浆液输送管道系统 ASME B31G-1991版确定已腐蚀管线剩余强度的手册 (对ASME B31压力管道规范的补充文件) ASME规范压力管道及管件B31、B16系列标准(下册)含10个标准 版铸铁管法兰和法兰管件(25、125和250磅级) 版可锻铸铁螺纹管件(150和300磅级) ( 版灰铸铁螺纹管件(125和250磅级) 版工厂制造的锻钢对焊管件 版阀门的面至面和端至端尺寸 版承插焊式和螺纹式锻造管件
工程设计/llljq 发表于2007-08-14, 21:54 作者:李敬琦 一、压力管道设计常用ASME标准 这里有两个标准,一个是组件尺寸型式标准(我国也有相应组件形式标准),另一个是材料标准(我国没有对材料形成专门的标准化)。 型式标准规定了组件的型式、系列、尺寸、公差、试验要求,以及该组件可采用的材料标准等。材料标准规定了适用的对象、原材料(坯料)品种(采用锻轧Wrought或锻件Forged)、化学成分、机械性能、制造工艺(包括焊接)、热处理、无损检查、取样和性能检验、质量证书、标志等。 1. 典型的组件型式标准 1)钢管 ANSI/ASME B36.10M 无缝及焊接钢管 ANSI/ASME B36.19M 不锈钢无缝及焊接钢管 2)管件 ANSI/ASME B16.9 工厂制造的钢对焊管件 ANSI/ASME B16.1 承插焊和螺纹锻造管件 ANSI/ASME B16.28 钢制对焊小半径弯头和回弯头 3)阀门 ANSI/ASME B16.34 法兰连接、螺纹连接和焊接连接的阀门 API 599 法兰或对焊连接的钢制旋塞阀 API 600 法兰或对焊连接的钢制闸阀 API 602 紧凑型碳钢闸阀 API 609 凸耳型对夹蝶阀 4)法兰 ANSI/ASME B16.5 管法兰和法兰管件 ANSI/ASME B16.36 孔板法兰 ANSI/ASME B16.42 球墨铸铁法兰和法兰管件 ANSI/ASME B16.47 大直径钢法兰 API 601 突面管法兰和法兰连接用金属垫片 5)垫片 ANSI/ASME B16.20 管法兰用缠绕式、包覆式垫片和环槽式用金属垫片 ANSI/ASME B16.21 管法兰用非金属平垫片 6)紧固件 ANSI/ASME B18.2.1 方头和六角头螺栓和螺纹 ANSI/ASME B18.2.2 方头和六角头螺母 7)管件 ASMEI B16.9 工厂制造的锻钢对焊管件
Construction Site 建筑工地 Apologize for any inconvenience caused during building operation 对施工期间带来的不便表示歉意。 Danger of death. Keep out. 生命危险,严禁入内。 Danger,building site, keep out 工地危险,禁止入内。 Danger,evacuation 危险,请走开 Dangerous structure, this bridge is unsafe 危险结构,该桥不安全。 Hot work in progress 正在施工 No persons allowed beyond this point 任何人不许越过此处。 Safety footwear.穿安全靴 Safety helmets must be worn on this site 此工地必须戴安全帽。 Site entrance, dangerous 工地入口,危险 Slow, site entrance 工地入口请慢行 This button has been moved for remedial work 该按钮已卸下拿去修理。 This is just for construction personnel 仅供施工人员使用。 This lift is only for construction personal 此电梯仅供施工人员使用。 This work will be completed by the end of this year. Thank you for your patience during the inevitable disruption 此工程于年底完工,感谢你施工期间的宽容大度。 We apologize for any inconvenience caused during this works 对施工期间引起的不便表示歉意。 Working overhead 上面在施工 关于建筑的英语词汇 to build, to construct 建设,建筑,修建 architecture 建筑学 building 修筑,建筑物 house 房子 skyscraper 摩天大楼 block of flats 公寓楼(美 作:apartment block) monument 纪念碑 palace 宫殿 temple 庙宇 basilica 皇宫,教堂 cathedral 大教堂 church 教堂 tower 塔,塔楼 ten-storey office block 十层办公大楼 column 柱 colonnade 柱列 arch 拱 town planning 市政(美作:city planning) building permission 营建许可证,建筑开工许可证 greenbelt 绿地 elevation 建筑物的三面图 plan 设计图 scale 比例尺to prefabricate 预制 excavation 挖土,掘土 foundations 基 to lay the foundations 打地基 course of bricks 砌好的砖列 scaffold 脚手架 scaffolding 脚手架 工程词汇 质量合格证书certification of fitness 原材料raw material 底板bottom plate 垫层cushion 侧壁sidewall 中心线center line 条形基础strip footing 附件accessories 型钢profile steel 钢板steel plate 熔渣slag 飞溅welding spatter 定位焊tacking 引弧generating of arc 熄弧quenching of arc 焊道welding bead 坡口beveled edges 外观检查visual inspection 重皮doubleskin 水平方向弧度radian in horizontal direction 成型molding 直线度straightness accuracy 焊缝角变形welding line angular distortion 水平度levelness 铅垂度verticality 翘曲变形buckling deformation 角尺angle square 对接焊缝butt weld 母材parent metal 法兰密封面flange sealing surface 夹层interlayer 表面锈蚀浓度surface corrosion concentration 挠曲变bending deformation 超声波探伤ultrasonic testing/ ultrasonic examination 压力容器pressure vessel 预制下料prefabrication baiting 排版直径set-type diameter 焊缝welding line 中幅板center plate 测量方法measuring method 基准点datum mark 跳焊skip welding 允许偏差allowable variation 补强板stiffening plate 开孔tapping
管道材料等级制定与ASME标准 一、压力管道设计常用ASME标准 这里有两个标准,一个是组件尺寸型式标准(我国也有相应组件形式标准),另一个是材料标准(我国没有对材料形成专门的标准化)。 型式标准规定了组件的型式、系列、尺寸、公差、试验要求,以及该组件可采用的材料标准等。材料标准规定了适用的对象、原材料(坯料)品种(采用锻轧Wrought或锻件Forged)、化学成分、机械性能、制造工艺(包括焊接)、热处理、无损检查、取样和性能检验、质量证书、标志等。 1. 典型的组件型式标准 1)钢管 ANSI/ASME B36.10M 无缝及焊接钢管 ANSI/ASME B36.19M 不锈钢无缝及焊接钢管 2)管件 ANSI/ASME B16.9 工厂制造的钢对焊管件 ANSI/ASME B16.1 承插焊和螺纹锻造管件 ANSI/ASME B16.28 钢制对焊小半径弯头和回弯头 3)阀门 ANSI/ASME B16.34 法兰连接、螺纹连接和焊接连接的阀门 API 599 法兰或对焊连接的钢制旋塞阀 API 600 法兰或对焊连接的钢制闸阀 API 602 紧凑型碳钢闸阀 API 609 凸耳型对夹蝶阀 4)法兰 ANSI/ASME B16.5 管法兰和法兰管件 ANSI/ASME B16.36 孔板法兰
ANSI/ASME B16.42 球墨铸铁法兰和法兰管件 ANSI/ASME B16.47 大直径钢法兰 API 601 突面管法兰和法兰连接用金属垫片 5)垫片 ANSI/ASME B16.20 管法兰用缠绕式、包覆式垫片和环槽式用金属垫片 ANSI/ASME B16.21 管法兰用非金属平垫片 6)紧固件 ANSI/ASME B18.2.1 方头和六角头螺栓和螺纹 ANSI/ASME B18.2.2 方头和六角头螺母 7)管件 ASMEI B16.9 工厂制造的锻钢对焊管件 ASME B16.11 承插焊和螺纹锻钢管件 MSS-SP-43 锻制不锈钢对焊管件 2. 材料标准 ASTM/ASME材料标准主要集中收录在ASME II A篇铁基材料,B篇非铁基材料,C篇焊条、焊丝填充金属,D篇性能,以及一些增补内容。 与压力管道设计相关的典型的为A篇、D篇等。 A篇的主要分类有:钢板、薄板和钢带,公称管(Pipe),管子(Tube),钢法兰、配件、阀门及零件,压力容器用钢板、薄板和钢带,结构钢,钢棒材,钢螺栓材料,钢坯和锻件,钢铸件,耐腐蚀钢和耐热钢,锻轧铁、铸铁和可锻铸铁,以及方法标准等。 材料表示方法用"标准号-级别"及UNS。 如304是级别。TP316前面的TP表示管材,英文单词TUBE &PIPE的首个字母。F316前面的F表示锻件,是FORGING的缩写。一般在ASME里,很多都是引用ASTM标准,并在前面加个S,如A312被ASME纳入后为SA312。在ASTM标准中,A表示为A系列材料,当然还有B、C 等。 美国高合金钢用UNS牌号表示,它是按美国钢铁协会AISI的编号表示方法转过来的,比如,AISI把18-8不锈钢记为UNS No S 30400(3代表镍铬钢),ASTM引用过来叫它为304型,
筒体shell 垫板pad 接管nozzl e 夹套封头jacket head 封头head 夹套jacket shell 椭圆封头ellipsoidal head 管箱channel 管板tubesheet 螺母nut 法兰flange 法兰盖blind flange 垫片gasket 垫圈washer 搅拌装臵agitator d evice 视镜sight glass 排气管vent pipe 进气管gas inl et pipe 接管nozzl e 换热管tube 拉杆tie ro 定距管spacer 旁路档板sealing strip 挡管dummy tbue 双头螺柱stud bolt 螺柱stud bolt 螺栓machine bolt 六角头螺母hex nut 顶丝jack bolt 接地板earth lug 吊耳lifting lug 耳座support lug 膨胀节expansion joint 隔板pass partition plate 凸缘pad flange 补强圈reinforcement plate 折流板baffl e 防冲板impingment plate 防涡流挡板vortex breaker 塔顶吊柱top davit 排气孔vent hole 泪孔tear hole 检漏孔tell-tal e hole 垫板pad plate 腹板web
筋板rib 底板base plate 填料箱gland box 保温螺母insulation nuts 保温支撑insulation support 铭牌name plate 铭牌座name plate support 带颈视镜sight glass 法兰盖blind flange 导流板baffl e 夹套封口环jacket closure 螺塞plug 堵头plug 视镜sight glass 镀锌galvanization 组合件component 衬板lining plate 衬环lining ring 管嘴spray 弯头ellbow 束节socket 管台socket 镀锌galvanization 待定hold 跨中均布straddle equi-spaced 拉筋rib 筋板rib 撑筋rib 人孔man hole asme常用词汇 abrasion, all owance for 磨损,裕量accessibility,pressure vessels 压力容器可达性 access openings 通道孔 all owance for corrosion, erosion, or abrasion 腐蚀裕量侵蚀或/磨损裕量applied linings, tightness 应用衬里密封性 approval of new materials, 新材料的批准 articles in section v 第v卷中的各章article 1, t-150 第1章t150 articl e 2 第2章 attachments 附件 lugs and fitting 支耳和配件 lugs for platforms, ladders, etc. 平