Electrical/electronic sub-assembly" (ESA)
参照ECE R10.03 整理出ESA 产品做E-MARK需要做的测试项目及对应的测试标准,非常实用。
sourceufo@https://www.doczj.com/doc/da9328823.html, 2012.07.21
NO.Test Item Standard Method of Testing
1immunity to transient
disturbances conducted
along supply
lines.
ISO 7637-2 2004
(ECE R10-03 6.8)
The immunity of ESA representative of its type shall be
tested by the method(s) according to
ISO 7637-2, second edition 2004 as described in
Annex 10 with the test levels given in
Table 1.
2Emission of Conducted
Disturbances
ISO 7637-2 2004
(ECE R10-03 6.9)
The emission of ESA representative of its type shall be
tested by the method(s) according to
ISO 7637-2, second edition 2004 as described in
Annex 10 for the levels given in Table 2.
3Broadband
Electromagnetic
Interference Generated
by
ESAs.
ECE R10-03 6.5
CISPR 25
The electromagnetic radiation generated by the ESA
representative of its type shall be
measured by the method described in Annex 7.
4narrowband
electromagnetic
interference generated
by ESAs.
ECE R10-03 6.6
CISPR 25
The electromagnetic radiation generated by the ESA
representative of its type shall be
measured by the method described in Annex 8.
Approval Limits
Limit E (dBμV/m) at frequency F (MHz) 30 - 75 MHz E = 62 – 25.13 log (F/30) ;
75 - 400 MHz E = 52 + 15.13 log (F/75) ; 400 – 1000 MHz E = 63 ;
APPENDIX 6
Limit E (dBμV/m) at frequency F (MHz) 30 - 75 MHz E = 52 – 25.13 log (F/30);
75 - 400 MHz E = 42 + 15.13 log (F/75) 400 – 1000 MHz E = 53 ;
APPENDIX 7