外文资料翻译
Design, Construction & Structural Details of Burj Dubai
The goal of the Burj Dubai Tower is not simply to be the world's highest building: it's to embody the world's highest aspirations. The superstructure is currently under construction and as of fall 2007 has reached over 160 stories. The final height of the building is 2,717 feet (828 meters). The height of the multi-use skyscraper will "comfortably" exceed the current record holder, the 509 meter (1671 ft) tall Taipei 101. The 280,000 m2 (3,000,000 ft2) reinforced concrete multi-use Burj Dubai tower is utilized for retail, a Giorgio Armani Hotel, residential and office. As with all super-tall projects, difficult structural engineering problems needed to be addressed and resolved。
Structural System Description
Burj Khalifa has "refuge floors" at 25 to 30 story intervals that are more fire resistant and have separate air supplies in case of emergency. Its reinforced concrete structure makes it stronger than steel-frame skyscrapers
Designers purposely shaped the structural concrete Burj Dubai - "Y" shaped in plan - to reduce the wind forces on the tower, as well as to keep the structure simple and foster constructibility. The structural system can be described as a "buttressed" core (Figures 1, 2 and 3). Each wing, with its own high performance concrete corridor walls and perimeter columns, buttresses the others via a six-sided central core, or hexagonal hub. The result is a tower that is extremely stiff laterally and torsionally. SOM applied a rigorous geometry to the tower that aligned all the common central core, wall, and column elements。
Each tier of the building sets back in a spiral stepping pattern up the building. The setbacks are organized with the Tower's grid, such that the building stepping is accomplished by aligning columns above with walls below to provide a smooth load path. This allows the construction to proceed without the normal difficulties associated with column transfers
The setbacks are organized such that the Tower's width changes at each setback. The advantage of the stepping and shaping is to "confuse the wind'1. The wind vortices never get organized because at each new tier the wind encounters a different building shape.
The Tower and Podium structures are currently under construction (Figure 3) and the project is scheduled for topping out in 2008。
Architectural Design
The context of the Burj Dubai being located in the city of Dubai, UAE, drove the inspiration for the building form to incorporate cultural, historical, and organic influences particular to the region。
The center hexagonal reinforced concrete core walls provide the torsional resistance of the structure similar to a closed tube or axle. The center hexagonal walls are buttressed by the wing walls and hammer head walls which behave as the webs and flanges of a beam to resist the wind shears and moments.
Outriggers at the mechanical floors allow the columns to participate in the lateral load resistance of the structure; hence, all of the vertical concrete is utilized to support both gravity and lateral loads. The wall concrete specified strengths ranged from C80 to C60 cube strength and utilized Portland cement and fly ash
Local aggregates were utilized for the concrete mix design. The C80 concrete for the lower portion of the structure had a specified Young's Elastic Modulus of 43,800 N/mm2 (6,350ksi) at 90 days. The wall and column sizes were optimized using virtual work .' La Grange multiplier methodology which results in a very efficient structure (Baker et ah, 2000). The reinforced concrete structure was designed in accordance with the requirements of ACI 318-02 Building Code Requirements for Structural Concrete
The wall thicknesses and column sizes were fine-tuned to reduce the effects of creep and shrinkage on the individual elements which compose the structure. To reduce the effects of differential column shortening, due to creep, between the perimeter columns and interior walls, the perimeter columns were sized such that the self-weight gravity stress on the perimeter columns matched the stress on the interior corridor walls. The five (5) sets of outriggers, distributed up the building, tie all the vertical load carrying elements together, further ensuring uniform gravity stresses: hence, reducing differential creep movements. Since the shrinkage in concrete occurs more quickly in thinner walls or columns, the perimeter column thickness of 600mm (24") matched the typical corridor wall thickness (similar volume to surface ratios) (Figure 5) to ensure the columns and walls will generally shorten at the same rate due to concrete shrinkage
The top section of the Tower consists of a structural steel spire utilizing a diagonally braced lateral system. The structural steel spire was designed for gravity, wind, seismic and fatigue in accordance with the requirements of AISC Load and Resistance Factor Design Specification for Structural Steel Buildings (1999). The exterior exposed steel is protected with a flame applied aluminum finish.
Analysis for Gravity
The structure was analyzed for gravity (including P-Delta analysis), wind, and seismic loadings by ETABS version 8.4 (Figure 6). The three-dimensional analysis model consisted of the reinforced concrete walls, link beams, slabs, raft, piles, and the spire
structural steel system. The full 3D analysis model consisted of over 73,500 shells and 75,000 nodes. Under lateral wind loading, the building deflections are well below commonly used criteria. The dynamic analysis indicated the first mode is lateral side sway with a period of 11.3 seconds (Figure 7). The second mode is a perpendicular lateral side sway with a period of 10.2 seconds. Torsion is the fifth mode with a period of 4.3 seconds
Site Test and Analysis
The Dubai Municipality (DM) specifies Dubai as a UBC97 Zone 2a seismic region (with a seismic zone facior Z = 0.15 and soil profile Sc). The seismic analysis consisted of a site specific response spectra analysis. Seismic loading typically did not govern the design of the reinforced concrete Tower structure. Seismic loading did govern the design of the reinforced concrete Podium buildings and the Tower structural steel spire
Dr. Max Irvine (with Structural Mechanics & Dynamics Consulting Engineers located in Sydney Australia) developed site specific seismic reports for the project including a seismic hazard analysis. The potential for liquefaction was investigated based on several accepted methods; it was determined that liquefaction is not considered to have any structural implications for the deep seated Tower foundations.
In addition to the standard cube tests, the raft concrete was field tested prior to placement by flow table (Figure 10). L-box, V-Box and temperature The Tower foundations consist of a pile supported raft. The solid reinforced concrete raft is 3.7 meters (12 ft) thick and was poured utilizing C50 (cube strength) self consolidating concrete (SCC). The raft was constructed in four (4) separate pours (three wings and the center core). Each raft pour occurred over at least a 24 hour period. Reinforcement was typically at 300mm spacing in the raft, and arranged such that every 10lh bar in each direction was omitted, resulting in a series of "pour enhancement strips" throughout the raft at which 600 mm x 600 mm openings at regular intervals facilitated access and concrete placement.
The Tower raft is supported by 194 bored cast-in-place piles. The piles are 1.5 meter in diameter and approximately 43 meters long with a design capacity of 3,000 tonnes each. The Tower pile load test supported over 6,000 tonnes (Figure 12). The C60 (cube strength) SCC concrete was placed by the tremie method utilizing polymer slurry. The friction piles are supported in the naturally cemented calcisiltite conglomeritic 聚结calcisiltite fomiations developing an ultimate pile skin friction of 250 to 350 kPa (2.6 to 3.6 tons / ft ). When the rebar cage was placed in the piles, special attention was paid to orient the rebar cage such that the raft bottom rebar could be threaded through the numerous pile rebar cages without interruption, which greatly simplified the raft construction.
1.The site geotechnical investigation consisted of the following Phases。
Phase I; 23 Boreholes (three with pressuremeter testing) with depths up to
90m.
2.Phase 2: 3 Boreholes drilled with cross-hole geophysics.。Phase 3: 6
Boreholes (two with pressuremeter testing) with depths up to 60m。Phase 4: 1 Borehole with cross-hole and down-hole gophysics; depth = 140m
3D foundation settlement analysis
A detailed 3D foundation settlement analysis was carried out (by Hyder Consulting Ltd., UK) based on the results of the geotechnical investigation and the pile load test results. It was determined the maximum long-term settlement over time would be about a maximum of 80mm (3.1"). This settlement would be a gradual curvature of the top of grade over the entire large site. When the construction was at Level 135, the average foundation settlement was 30mm (1.2"). The geotechnical studies were peer reviewed by both Mr. Clyde Baker of STS Consultants, Ltd. (Chicago, IL, USA) and by Dr. Harry Poulos of Coffey Geosciences (Sydney, Australia).
The groundwater in which the Burj Dubai substructure is constructed is particularly severe, with chloride concentrations of up to 4.5%, and sulfates of up to 0.6%. The chloride and sulfate concentrations found in the groundwater are even higher than the concentrations in sea water. Accordingly, the primary consideration in designing the piles and raft foundation was durability. The concrete mix for the piles was a 60 MPa mix based on a triple blend with 25% fly ash, 7% silica fume, and a water to cement ratio of 0.32. The concrete was also designed as a fully self consolidating concrete, incorporating a viscosity modifying admixture with a slump flow of 675 +/- 75mm to limit the possibility of defects during construction.
Due to the aggressive conditions present caused by the extremely corrosive ground water, a rigorous program of anti-corrosion measures was required to ensure the durability of the foundations. Measures implemented included specialized waterproofing systems, increased concrete cover, the addition of corrosion inhibitors to the concrete mix. stringent crack control design criteria, and cathodic protection system utilizing titanium mesh (Figure 13) with an impressed current.
Wind Engineering
For a building of this height and slenderness, wind forces and the resulting motions in the upper levels become dominant factors in the structural design. An extensive program of wind tunnel tests and other studies were undertaken under the direction of Dr. Peter Irwin of Rowan Williams Davies and Irwin Inc.'s (RWD1) boundary* layer
wind tunnels in Guelph. Ontario (Figure 14). The wind tunnel program included
rigid-model force balance tests, a foil multi degree of freedom aero elastic model studies, measurements of localized pressures, pedestrian wind
environment studies and wind climatic studies. Wind tunnel models account for the cross wind effects of wind induced vortex shedding on the building. The aeroelastic and force balance studies used models mostly at 1:500 scale. The RWDI wind engineering was peer reviewed by Dr. Nick Isyumov of the University of Western Ontario Boundary Layer Wind Tunnel Laboratory.
迪拜的设计
迪拜塔的目的不仅仅只是成为世界上最高的建筑：而是象征着世界上最高的抱负。那个庞然大物目前正在建设当中，而到了2007年秋就已经超过了160多层。最后的高度将达到828米。这栋混合结构的摩天大厦将轻轻松松超过目前最高纪录的保持着台北101大厦。这栋拥有280000立方米混凝土的混合结构迪拜塔将投入商用，最为一个宾馆，商品房还有办公用所。和其他超高工程一样，复杂的工程意味着面临一大堆的工程问题要解决。
迪拜塔每隔25到30层便设置一个“避难层”，这些层跟普通楼层比起来更加能抗火而且备有独立的空气提供系统以防事故。钢筋混凝土结构使得它比全钢结构摩天大厦更坚实。
设计者有意的将混凝土结构的迪拜塔设计成“y”形状的来减少风荷载对它的影响，同时也简化结构提高施工的可行性。结构系统可以用“板根状”核心。每一翼上面的高性能混凝土走廊和周围的柱子通过位于核心的六边形集合板和其他的翼相连。这个特点使得迪拜塔具有十足的抗水平荷载和抗扭刚度。Som应用严格的几何来使得塔内的中心和墙柱得以均衡受力。建筑的每一层都设置了螺旋形的垫层。这种装置是通过塔的布置格式设定，这样那个垫层就能准确的被安置通过矫正柱子和相面的墙来提供一个联系顺滑的路线。这样就可以使得建设不用碰到柱子运输过程中所碰到的种种问题从而顺利进行。
迪拜塔的被设置成每一个单元的宽度都是不一样的。阶梯状和尖状的优势是可以削弱分散风力。因为每一层的形状都不一样所以漩涡风不会形成。整个塔当前还正在建设当中，而这个项目计划在2008年封顶。
建筑设计
迪拜塔坐落于迪拜的市中心，Uae，驱动着城市的文化历史，并且对局部区域产生了重大影响。
位于中心以六边形分布的核心墙为给结构所提供的抗扭力相当于一个套管或者车轴，在结构的外表提供一个坚实结构。正六边形的墙体是通过翼缘板来加固的，而这也是作为梁的用于抵抗剪力和偶然荷载的翼缘板和凸出部分。
在机动层的桁架使得柱子可以一起抵抗位于结构的侧向上的荷载。因此，所有的垂直的混凝土在水平和重力两个方向上都有得到了应用。特种水泥的强度能达到c80到c60立方体强度，原料包括用波兰水泥和火山灰。
而混凝土是用当地的搅拌器搅拌的。占少数比例的C80的混凝土在第90天的初期弹性模数有43,800 N/mm2。墙体和柱子的最佳的尺寸都是用L综合方法算出来的，而这时使得整体结构被利用得很充分合理。混凝土结构的设计是根据
aci318-02混凝土建筑标准规范的要求设计的。
墙的厚度和柱子的尺寸是互相协调的，较少了各个构件因为滑移和收缩而产生的不良影响。为了减少因为滑移所造成的不同柱子缩短的影响，周边的柱子的尺寸是这样制定的：结构自重在周边柱子产生的压力加上建筑在内走廊的墙所产生的压力。分布于建筑内的5榀桁架把所有的承受竖向荷载的构件联系了起来，进一步保证了整体的竖向承载力，因此。
塔的顶部是由运用一个斜向支撑侧向系统的钢塔尖。这个钢结构塔尖是根据《美国钢结构协会关于钢结构建筑的荷载规定和抵抗因素设计说明》的相关要求去设计的，用来抵抗重力，风力，地震和疲劳的破坏。暴露在外的钢构件是用焊接在外的铝箔来保护的
自身重力受力分析
结构的重力（非几何线性分析），风，地震荷载是通过8.4版本的结构软件来分析的。三维模型的组成包括：混凝土墙体，连系梁，板，筏板，桩，还有钢塔尖系统。全部的三维结构分析有共有73500个板件和75000个节点。在侧向风荷载作用下，建筑的偏斜程度被控制在正常规定下。结构的动态分析显示了第一振动周期为11.3秒。而第二振动模型的振动周期为10.2秒。涉及扭转的第十五个模型的振动周期为4.3。
选址评估分析。
迪拜当局政府制定迪拜为一个（美国97抗震规范）2a地震区（）。地震分析包括指定的地点回应光谱分析。地震荷载一般不能主导整个钢筋混凝土塔结构的设计。但是地震荷载却能够左右钢筋混凝土台和塔式的钢结构的设计。
（澳大利亚悉尼的结构原理和动态结构资讯工程师顾问）撰写了该地址的包含一次地震所可能带来的灾难情况的地震预测分析报告。各种潜在的液化液体通过几
种被广泛认可的方法调查研究。在这里这些液化的液体被认为是对塔深部基础在结构上的没有任何的影响的。
.除了标准立方体试块实验，筏板混凝土在被送至安装之前也在流动性试验台上通过了局部的强度测验。塔的基础由筏形桩台构成。这坚硬的钢筋混凝土筏板有3.7米厚，并且采用的是c50的加强混凝土。筏板分成独立的四块灌溉而成。每一块筏板都要花费24个小时才能完成灌溉。
整个塔的筏型基础是由194根转孔灌注桩支撑。桩的直径有1.5米长度有43米长，每根都能够承重3000吨的重力。而实际上通过测试可以达到6000吨的承载力。而添加聚合物（润滑剂的c60的混凝土时通过是混凝土导管来输送的。摩擦桩是通过混凝土表面和岩石表面的聚结作用来实现承载的，而在底部桩体和岩土的摩擦力能够达到250到300kpa。党钢筋笼被放置入桩孔的时候，这个时候特别注意和确定钢筋笼的位置，这样筏形基础的钢筋就能够背及时放入部分的桩中而无需再特意地去中断混凝土的灌溉，这样可以大大的简化筏型基基础的施工。
地址的岩土勘探情况如下：
第一阶段：23个转孔，其中有三个佩带有承载力测试，转深到90米。
第二个阶段：3个转孔，通过地球物理勘探。
.第三个阶段：六个转孔，两个通过承载力测试，深度达到60米。
第四阶段：1个转孔，深度140米。
三维基础沉降量模型是建立在上述的岩土勘探和桩荷载测试结果的基础上的。已有规定长期的最大沉降量为80mm。基础的上部的所有的重量将会使得基础慢慢弯曲。当施工达到了135层时，基础的平均沉降将达到30mm。这个岩土研究由。。和。。负责严加注意。
迪拜的地下水舍得迪拜的地下结构经受的着严峻的环境，地下水的氯聚合物含量达到了4.5%而硫化物含量也达到了0.6%。这比海水中所发现的含量还高。相应的，在设计的时候就要考虑到桩和筏形基础的抗腐蚀能力。桩身的混凝土由25%粉煤灰7%石英粉和水灰比0.32的混凝土浆。这种混凝土还能够自压实，外加参合剂来克服混凝土的一些施工缺陷。
在由于地下腐蚀性水所带来的高挑战性下，为了确保基础的抗腐蚀能力而要求要做一项严格的腐蚀性测试。测试的工具包括专业化的防水系统测试，抗腐蚀添加剂所对混凝土带来的影响，还有严格抗裂设计要求，以及用电级保护（利用钛网和外加电流）。
风荷载设计
对于这样一座高而细长的建筑，风荷载和和风荷载在高层的效应成为了结构设计的主导问题。大量的风洞试验和相关研究在策划下进行。风洞测验包括了刚性模型平衡力测试，和在各种垫板不懂自由空气弹性模型的学习，还有当地的风压测试，以及局部的风环境以及风气候研究。风洞试验模型考虑到了风经过建筑所引起的漩涡效应及其对建筑的影响。空气弹性变形和荷载平衡是按照模型比为1:500的比例进行的。而迪拜风洞工程是由西安大略大学的边界层风洞实验室来监督进行的。
项目成本控制 一、引言 项目是企业形象的窗口和效益的源泉。随着市场竞争日趋激烈，工程质量、文明施工要求不断提高，材料价格波动起伏，以及其他种种不确定因素的影响，使得项目运作处于较为严峻的环境之中。由此可见项目的成本控制是贯穿在工程建设自招投标阶段直到竣工验收的全过程，它是企业全面成本管理的重要环节，必须在组织和控制措施上给于高度的重视，以期达到提高企业经济效益的目的。 二、概述 工程施工项目成本控制，指在项目成本在成本发生和形成过程中，对生产经营所消耗的人力资源、物资资源和费用开支，进行指导、监督、调节和限制，及时预防、发现和纠正偏差从而把各项费用控制在计划成本的预定目标之内，以达到保证企业生产经营效益的目的。 三、施工企业成本控制原则 施工企业的成本控制是以施工项目成本控制为中心，施工项目成本控制原则是企业成本管理的基础和核心，施工企业项目经理部在对项目施工过程进行成本控制时，必须遵循以下基本原则。 3.1 成本最低化原则。施工项目成本控制的根本目的，在于通过成本管理的各种手段，促进不断降低施工项目成本，以达到可能实现最低的目标成本的要求。在实行成本最低化原则时，应注意降低成本的可能性和合理的成本最低化。一方面挖掘各种降低成本的能力，使可能性变为现实；另一方面要从实际出发，制定通过主观努力可能达到合理的最低成本水平。 3.2 全面成本控制原则。全面成本管理是全企业、全员和全过程的管理，亦称“三全”管理。项目成本的全员控制有一个系统的实质性内容，包括各部门、各单位的责任网络和班组经济核算等等，应防止成本控制人人有责，人人不管。项目成本的全过程控制要求成本控制工作要随着项目施工进展的各个阶段连续 进行，既不能疏漏，又不能时紧时松，应使施工项目成本自始至终置于有效的控制之下。 3.3 动态控制原则。施工项目是一次性的，成本控制应强调项目的中间控制，即动态控制。因为施工准备阶段的成本控制只是根据施工组织设计的具体内容确
PA VEMENT PROBLEMS CAUSED BY COLLAPSIBLE SUBGRADES By Sandra L. Houston,1 Associate Member, ASCE (Reviewed by the Highway Division) ABSTRACT: Problem subgrade materials consisting of collapsible soils are com- mon in arid environments, which have climatic conditions and depositional and weathering processes favorable to their formation. Included herein is a discussion of predictive techniques that use commonly available laboratory equipment and testing methods for obtaining reliable estimates of the volume change for these problem soils. A method for predicting relevant stresses and corresponding collapse strains for typical pavement subgrades is presented. Relatively simple methods of evaluating potential volume change, based on results of familiar laboratory tests, are used. INTRODUCTION When a soil is given free access to water, it may decrease in volume, increase in volume, or do nothing. A soil that increases in volume is called a swelling or expansive soil, and a soil that decreases in volume is called a collapsible soil. The amount of volume change that occurs depends on the soil type and structure, the initial soil density, the imposed stress state, and the degree and extent of wetting. Subgrade materials comprised of soils that change volume upon wetting have caused distress to highways since the be- ginning of the professional practice and have cost many millions of dollars in roadway repairs. The prediction of the volume changes that may occur in the field is the first step in making an economic decision for dealing with these problem subgrade materials. Each project will have different design considerations, economic con- straints, and risk factors that will have to be taken into account. However, with a reliable method for making volume change predictions, the best design relative to the subgrade soils becomes a matter of economic comparison, and a much more rational design approach may be made. For example, typical techniques for dealing with expansive clays include: (1) In situ treatments with substances such as lime, cement, or fly-ash; (2) seepage barriers and/ or drainage systems; or (3) a computing of the serviceability loss and a mod- ification of the design to "accept" the anticipated expansion. In order to make the most economical decision, the amount of volume change (especially non- uniform volume change) must be accurately estimated, and the degree of road roughness evaluated from these data. Similarly, alternative design techniques are available for any roadway problem. The emphasis here will be placed on presenting economical and simple methods for: (1) Determining whether the subgrade materials are collapsible; and (2) estimating the amount of volume change that is likely to occur in the 'Asst. Prof., Ctr. for Advanced Res. in Transp., Arizona State Univ., Tempe, AZ 85287. Note. Discussion open until April 1, 1989. To extend the closing date one month,
转型衰退时期的土木工程研究 Sergios Lambropoulosa[1], John-Paris Pantouvakisb, Marina Marinellic 摘要 最近的全球经济和金融危机导致许多国家的经济陷入衰退，特别是在欧盟的周边。这些国家目前面临的民用建筑基础设施的公共投资和私人投资显著收缩，导致在民事特别是在民用建筑方向的失业。因此，在所有国家在经济衰退的专业发展对于土木工程应届毕业生来说是努力和资历的不相称的研究，因为他们很少有机会在实践中积累经验和知识，这些逐渐成为过时的经验和知识。在这种情况下，对于技术性大学在国家经济衰退的计划和实施的土木工程研究大纲的一个实质性的改革势在必行。目的是使毕业生拓宽他们的专业活动的范围，提高他们的就业能力。 在本文中，提出了土木工程研究课程的不断扩大，特别是在发展的光毕业生的潜在的项目，计划和投资组合管理。在这个方向上，一个全面的文献回顾，包括ASCE体为第二十一世纪，IPMA的能力的基础知识，建议在其他：显著增加所提供的模块和项目管理在战略管理中添加新的模块，领导行为，配送管理，组织和环境等；提供足够的专业训练五年的大学的研究；并由专业机构促进应届大学生认证。建议通过改革教学大纲为土木工程研究目前由国家技术提供了例证雅典大学。 1引言 土木工程研究（CES）蓬勃发展，是在第二次世界大战后。土木工程师的出现最初是由重建被摧毁的巨大需求所致，目的是更多和更好的社会追求。但是很快，这种演变一个长期的趋势，因为政府为了努力实现经济发展，采取了全世界的凯恩斯主义的理论，即公共基础设施投资作为动力。首先积极的结果导致公民为了更好的生活条件（住房，旅游等）和增加私人投资基础设施而创造机会。这些现象再国家的发展中尤为为明显。虽然前景并不明朗（例如，世界石油危机在70年代），在80年代领先的国家采用新自由主义经济的方法（如里根经济政策），这是最近的金融危机及金融危机造成的后果（即收缩的基础设施投资，在技术部门的高失业率），消除发展前途无限的误区。 技术教育的大学所认可的大量研究土木工程部。旧学校拓展专业并且新的学校建成，并招收许多学生。由于高的职业声望，薪酬，吸引高质量的学校的学生。在工程量的增加和科学技术的发展，导致到极强的专业性，无论是在研究还是工作当中。结构工程师，液压工程师，交通工程师等，都属于土木工程。试图在不同的国家采用专业性的权利，不同的解决方案，，从一个统一的大学学历和广泛的专业化的一般职业许可证。这个问题在许多其他行业成为关键。国际专业协会的专家和机构所确定的国家性检查机构，经过考试后，他们证明不仅是行业的新来者，而且专家通过时间来确定进展情况。尽管在很多情况下，这些证书虽然没有国家接受，他们赞赏和公认的世界。 在试图改革大学研究（不仅在土木工程）更接近市场需求的过程中，欧盟确定了1999博洛尼亚宣言，它引入了一个二能级系统。第一级度（例如，一个三年的学士）是进入
专业资料 学院： 专业：土木工程 姓名： 学号： 外文出处：Structural Systems to resist (用外文写) Lateral loads 附件：1.外文资料翻译译文；2.外文原文。
附件1：外文资料翻译译文 抗侧向荷载的结构体系 常用的结构体系 若已测出荷载量达数千万磅重，那么在高层建筑设计中就没有多少可以进行极其复杂的构思余地了。确实，较好的高层建筑普遍具有构思简单、表现明晰的特点。 这并不是说没有进行宏观构思的余地。实际上，正是因为有了这种宏观的构思，新奇的高层建筑体系才得以发展，可能更重要的是：几年以前才出现的一些新概念在今天的技术中已经变得平常了。 如果忽略一些与建筑材料密切相关的概念不谈，高层建筑里最为常用的结构体系便可分为如下几类： 1.抗弯矩框架。 2.支撑框架，包括偏心支撑框架。 3.剪力墙，包括钢板剪力墙。 4.筒中框架。 5.筒中筒结构。 6.核心交互结构。 7. 框格体系或束筒体系。 特别是由于最近趋向于更复杂的建筑形式，同时也需要增加刚度以抵抗几力和地震力，大多数高层建筑都具有由框架、支撑构架、剪力墙和相关体系相结合而构成的体系。而且，就较高的建筑物而言，大多数都是由交互式构件组成三维陈列。 将这些构件结合起来的方法正是高层建筑设计方法的本质。其结合方式需要在考虑环境、功能和费用后再发展，以便提供促使建筑发展达到新高度的有效结构。这并
不是说富于想象力的结构设计就能够创造出伟大建筑。正相反，有许多例优美的建筑仅得到结构工程师适当的支持就被创造出来了，然而，如果没有天赋甚厚的建筑师的创造力的指导，那么，得以发展的就只能是好的结构，并非是伟大的建筑。无论如何，要想创造出高层建筑真正非凡的设计，两者都需要最好的。 虽然在文献中通常可以见到有关这七种体系的全面性讨论，但是在这里还值得进一步讨论。设计方法的本质贯穿于整个讨论。设计方法的本质贯穿于整个讨论中。 抗弯矩框架 抗弯矩框架也许是低，中高度的建筑中常用的体系，它具有线性水平构件和垂直构件在接头处基本刚接之特点。这种框架用作独立的体系，或者和其他体系结合起来使用，以便提供所需要水平荷载抵抗力。对于较高的高层建筑，可能会发现该本系不宜作为独立体系，这是因为在侧向力的作用下难以调动足够的刚度。 我们可以利用STRESS，STRUDL 或者其他大量合适的计算机程序进行结构分析。所谓的门架法分析或悬臂法分析在当今的技术中无一席之地，由于柱梁节点固有柔性，并且由于初步设计应该力求突出体系的弱点，所以在初析中使用框架的中心距尺寸设计是司空惯的。当然，在设计的后期阶段，实际地评价结点的变形很有必要。 支撑框架 支撑框架实际上刚度比抗弯矩框架强，在高层建筑中也得到更广泛的应用。这种体系以其结点处铰接或则接的线性水平构件、垂直构件和斜撑构件而具特色，它通常与其他体系共同用于较高的建筑，并且作为一种独立的体系用在低、中高度的建筑中。
姓名： 学号： 10447425 X X 大学 毕业设计（论文）外文翻译 （2014届） 外文题目Developments in excavation bracing systems 译文题目开挖工程支撑体系的发展 外文出处Tunnelling and Underground Space Technology 31 (2012) 107–116 学生XXX 学院XXXX 专业班级XXXXX 校内指导教师XXX 专业技术职务XXXXX 校外指导老师专业技术职务 二○一三年十二月
开挖工程支撑体系的发展 1.引言 几乎所有土木工程建设项目（如建筑物，道路，隧道，桥梁，污水处理厂，管道，下水道）都涉及泥土挖掘的一些工程量。往往由于由相邻的结构，特性线，或使用权空间的限制，必须要一个土地固定系统，以允许土壤被挖掘到所需的深度。历史上，许多挖掘支撑系统已经开发出来。其中，现在比较常见的几种方法是：板桩，钻孔桩墙，泥浆墙。 土地固定系统的选择是由技术性能要求和施工可行性（例如手段，方法）决定的，包括执行的可靠性，而成本考虑了这些之后，其他问题也得到解决。通常环境后果（用于处理废泥浆和钻井液如监管要求）也非常被关注（邱阳、1998）。 土地固定系统通常是建设项目的较大的一个组成部分。如果不能按时完成项目，将极大地影响总成本。通常首先建造支撑，在许多情况下，临时支撑系统是用于支持在挖掘以允许进行不断施工，直到永久系统被构造。临时系统可以被去除或留在原处。 打桩时，因撞击或振动它们可能会被赶入到位。在一般情况下，振动是最昂贵的方法，但只适合于松散颗粒材料，土壤中具有较高电阻（例如，通过鹅卵石）的不能使用。采用打入桩系统通常是中间的成本和适合于软沉积物（包括粘性和非粘性），只要该矿床是免费的鹅卵石或更大的岩石。 通常，垂直元素（例如桩）的前安装挖掘工程和水平元件（如内部支撑或绑回）被安装为挖掘工程的进行下去，从而限制了跨距长度，以便减少在垂直开发弯矩元素。在填充情况下，桩可先设置，从在斜坡的底部其嵌入悬挑起来，安装作为填充进步水平元素（如搭背或土钉）。如果滞后是用来保持垂直元素之间的土壤中，它被安装为挖掘工程的进行下去，或之前以填补位置。 吉尔- 马丁等人（2010）提供了一个数值计算程序，以获取圆形桩承受轴向载荷和统一标志（如悬臂桩）的单轴弯矩的最佳纵筋。他们开发的两种优化流程：用一个或两个直径为纵向钢筋。优化增强模式允许大量减少的设计要求钢筋的用量，这些减少纵向钢筋可达到50％相对传统的，均匀分布的加固方案。 加固桩集中纵向钢筋最佳的位置在受拉区。除了节约钢筋，所述非对称加强钢筋图案提高抗弯刚度，通过增加转动惯量的转化部分的时刻。这种增加的刚性可能会在一段时间内增加的变形与蠕变相关的费用。评估相对于传统的非对称加强桩的优点，对称，钢筋桩被服务的条件下全面测试来完成的，这种试验是为了验证结构的可行性和取得的变形的原位测量。 基于现场试验中，用于优化的加强图案的优点浇铸钻出孔（CIDH）在巴塞罗那的
（ 二 〇 一 二 年 六 月 外文文献及翻译 题 目： About Buiding on the Structure Design 学生姓名： 学 院：土木工程学院 系 别：建筑工程系 专 业：土木工程(建筑工程方向) 班 级：土木08-4班 指导教师：
英文原文： Building construction concrete crack of prevention and processing Abstract The crack problem of concrete is a widespread existence but again difficult in solve of engineering actual problem, this text carried on a study analysis to a little bit familiar crack problem in the concrete engineering, and aim at concrete the circumstance put forward some prevention, processing measure. Keyword:Concrete crack prevention processing Foreword Concrete's ising 1 kind is anticipate by the freestone bone, cement, water and other mixture but formation of the in addition material of quality brittleness not and all material.Because the concrete construction transform with oneself, control etc. a series problem, harden model of in the concrete existence numerous tiny hole, spirit cave and tiny crack, is exactly because these beginning start blemish of existence just make the concrete present one some not and all the characteristic of quality.The tiny crack is a kind of harmless crack and accept concrete heavy, defend Shen and a little bit other use function not a creation to endanger.But after the concrete be subjected to lotus carry, difference in temperature etc. function, tiny crack would continuously of expand with connect, end formation we can see without the
土木工程毕业设计外文文献翻译修订版 IBMT standardization office【IBMT5AB-IBMT08-IBMT2C-ZZT18】
外文文献翻译 Reinforced Concrete （来自《土木工程英语》） Concrete and reinforced concrete are used as building materials in every country. In many, including the United States and Canada, reinforced concrete is a dominant structural material in engineered construction. The universal nature of reinforced concrete construction stems from the wide availability of reinforcing bars and the constituents of concrete, gravel, sand, and cement, the relatively simple skills required in concrete construction, and the economy of reinforced concrete compared to other forms of construction. Concrete and reinforced concrete are used in bridges, buildings of all sorts underground structures, water tanks, television towers, offshore oil exploration and production structures, dams, and even in ships. Reinforced concrete structures may be cast-in-place concrete, constructed in their final location, or they may be precast concrete produced in a factory and erected at the construction site. Concrete structures may be severe and functional in design, or the shape and layout and be whimsical and artistic. Few other building materials off the architect and engineer such versatility and scope. Concrete is strong in compression but weak in tension. As a result, cracks develop whenever loads, or restrained shrinkage of temperature changes, give rise to tensile stresses in excess of the tensile strength of the concrete. In
学校 毕业设计（论文）附件 外文文献翻译 学号： xxxxx 姓名： xxx 所在系别： xxxxx 专业班级： xxx 指导教师： xxxx 原文标题： Building construction concrete crack of prevention and processing 2012年月日 .
建筑施工混凝土裂缝的预防与处理1 摘要 混凝土的裂缝问题是一个普遍存在而又难于解决的工程实际问题，本文对混凝土工程中常见的一些裂缝问题进行了探讨分析，并针对具体情况提出了一些预防、处理措施。 关键词：混凝土裂缝预防处理 前言 混凝土是一种由砂石骨料、水泥、水及其他外加材料混合而形成的非均质脆性材料。由于混凝土施工和本身变形、约束等一系列问题，硬化成型的混凝土中存在着众多的微孔隙、气穴和微裂缝，正是由于这些初始缺陷的存在才使混凝土呈现出一些非均质的特性。微裂缝通常是一种无害裂缝，对混凝土的承重、防渗及其他一些使用功能不产生危害。但是在混凝土受到荷载、温差等作用之后，微裂缝就会不断的扩展和连通，最终形成我们肉眼可见的宏观裂缝，也就是混凝土工程中常说的裂缝。 混凝土建筑和构件通常都是带缝工作的，由于裂缝的存在和发展通常会使内部的钢筋等材料产生腐蚀，降低钢筋混凝土材料的承载能力、耐久性及抗渗能力，影响建筑物的外观、使用寿命，严重者将会威胁到人们的生命和财产安全。很多工程的失事都是由于裂缝的不稳定发展所致。近代科学研究和大量的混凝土工程实践证明，在混凝土工程中裂缝问题是不可避免的，在一定的范围内也是可以接受的，只是要采取有效的措施将其危害程度控制在一定的范围之内。钢筋混凝土规范也明确规定：有些结构在所处的不同条件下，允许存在一定宽度的裂缝。但在施工中应尽量采取有效措施控制裂缝产生，使结构尽可能不出现裂缝或尽量减少裂缝的数量和宽度，尤其要尽量避免有害裂缝的出现，从而确保工程质量。 混凝土裂缝产生的原因很多，有变形引起的裂缝：如温度变化、收缩、膨胀、不均匀沉陷等原因引起的裂缝；有外载作用引起的裂缝；有养护环境不当和化学作用引起的裂缝等等。在实际工程中要区别对待，根据实际情况解决问题。 混凝土工程中常见裂缝及预防: 1.干缩裂缝及预防 干缩裂缝多出现在混凝土养护结束后的一段时间或是混凝土浇筑完毕后的一周左右。水泥浆中水分的蒸发会产生干缩，且这种收缩是不可逆的。干缩裂缝的产生主要是由于混凝土内外水分蒸发程度不同而导致变形不同的结果：混凝土受外部条件的影响，表面水分损失过快，变形较大，内部湿度变化较小变形较小，较大的表面干缩变形受到混凝土内部约束，产生较大拉应力而产生裂缝。相对湿度越低，水泥浆体干缩越大，干缩裂缝越易产 1原文出处及作者：《加拿大土木工程学报》
7 Rigid-Frame Structures A rigid-frame high-rise structure typically comprises parallel or orthogonally arranged bents consisting of columns and girders with moment resistant joints. Resistance to horizontal loading is provided by the bending resistance of the columns, girders, and joints. The continuity of the frame also contributes to resisting gravity loading, by reducing the moments in the girders. The advantages of a rigid frame are the simplicity and convenience of its rectangular form.Its unobstructed arrangement, clear of bracing members and structural walls, allows freedom internally for the layout and externally for the fenestration. Rig id frames are considered economical for buildings of up to' about 25 stories, above which their drift resistance is costly to control. If, however, a rigid frame is combined with shear walls or cores, the resulting structure is very much stiffer so that its height potential may extend up to 50 stories or more. A flat plate structure is very similar to a rigid frame, but with slabs replacing the girders As with a rigid frame, horizontal and vertical loadings are resisted in a flat plate structure by the flexural continuity between the vertical and horizontal components. As highly redundant structures, rigid frames are designed initially on the basis of approximate analyses, after which more rigorous analyses and checks can be made. The procedure may typically inc lude the following stages: 1. Estimation of gravity load forces in girders and columns by approximate method. 2. Preliminary estimate of member sizes based on gravity load forces with arbitrary increase in sizes to allow for horizontal loading. 3. Approximate allocation of horizontal loading to bents and preliminary analysis of member forces in bents. 4. Check on drift and adjustment of member sizes if necessary. 5. Check on strength of members for worst combination of gravity and horizontal loading, and adjustment of member sizes if necessary. 6. Computer analysis of total structure for more accurate check on member strengths and drift, with further adjustment of sizes where required. This stage may include the second-order P-Delta effects of gravity loading on the member forces and drift.. 7. Detailed design of members and connections.
PROJECTCOSTCONTROL INTRODUCTION project a corporate image window and effectiveness of the source. With increasingly fierce market competition, the quality of work and the construction of civilizations rising material prices fluctuations. uncertainties and other factors, make the project operational in a relatively tough environment. So the cost of control is through the building of the project since the bidding phase of acceptance until the completion of the entire process, It is a comprehensive enterprise cost management an important part, we must organize and control measures in height to the attention with a view to improving the economic efficiency of enterprises to achieve the purpose. 2, outlining the construction project cost control, the cost of the project refers to the cost and process of formation occurred, on the production and operation of the amount of human resources, material resources and expenses, guidance, supervision, regulation and restrictions, in a timely manner to prevent, detect and correct errors in order to control costs in all project costs within the intended target. to guarantee the production and operation of enterprises benefits. 4, the construction cost control measures cost control measures. Reduce the cost of construction projects means, we should not only increase revenue is also reducing expenditure, or both also increase savings. Cutting expenditure is not only revenue, or revenue not only to cut expenditure, it is impossible to achieve the aim of reducing costs, at least there is no ideal lower cost effective.
附录：中英文翻译 英文部分： LOADS Loads that act on structures are usually classified as dead loads or live loads are fixed in location and constant in magnitude throughout the life of the the self-weight of a structure is the most important part of the structure and the unit weight of the density varies from about 90 to 120 pcf (14 to 19 KN/m)for lightweight concrete,and is about 145 pcf (23 KN/m)for normal calculating the dead load of structural concrete,usually a 5 pcf (1 KN/m)increment is included with the weight of the concrete to account for the presence of the reinforcement. Live loads are loads such as occupancy,snow,wind,or traffic loads,or seismic may be either fully or partially in place,or not present at may also change in location. Althought it is the responsibility of the engineer to calculate dead loads,live loads are usually specified by local,regional,or national codes and sources are the publications of the American National Standards Institute,the American Association of State Highway and Transportation Officials and,for wind loads,the recommendations of the ASCE Task Committee on Wind Forces. Specified live the loads usually include some allowance for overload,and may include measures such as posting of maximum loads will not be is oftern important to distinguish between the
学号： 10447425 X X 大学 毕业设计（论文）外文翻译 （2014届） 外文题目 Developments in excavation bracing systems 译文题目开挖工程支撑体系的发展 外文出处 Tunnelling and Underground Space Technology 31 (2012) 107–116 学生 XXX 学院 XXXX 专业班级 XXXXX 校内指导教师 XXX 专业技术职务 XXXXX 校外指导老师专业技术职务 二○一三年十二月
开挖工程支撑体系的发展 1.引言 几乎所有土木工程建设项目（如建筑物，道路，隧道，桥梁，污水处理厂，管道，下水道）都涉及泥土挖掘的一些工程量。往往由于由相邻的结构，特性线，或使用权空间的限制，必须要一个土地固定系统，以允许土壤被挖掘到所需的深度。历史上，许多挖掘支撑系统已经开发出来。其中，现在比较常见的几种方法是：板桩，钻孔桩墙，泥浆墙。 土地固定系统的选择是由技术性能要求和施工可行性（例如手段，方法）决定的，包括执行的可靠性，而成本考虑了这些之后，其他问题也得到解决。通常环境后果（用于处理废泥浆和钻井液如监管要求）也非常被关注（邱阳、1998）。 土地固定系统通常是建设项目的较大的一个组成部分。如果不能按时完成项目，将极大地影响总成本。通常首先建造支撑，在许多情况下，临时支撑系统是用于支持在挖掘以允许进行不断施工，直到永久系统被构造。临时系统可以被去除或留在原处。 打桩时，因撞击或振动它们可能会被赶入到位。在一般情况下，振动是最昂贵的方法，但只适合于松散颗粒材料，土壤中具有较高电阻（例如，通过鹅卵石）的不能使用。采用打入桩系统通常是中间的成本和适合于软沉积物（包括粘性和非粘性），只要该矿床是免费的鹅卵石或更大的岩石。 通常，垂直元素（例如桩）的前安装挖掘工程和水平元件（如内部支撑或绑回）被安装为挖掘工程的进行下去，从而限制了跨距长度，以便减少在垂直开发弯矩元素。在填充情况下，桩可先设置，从在斜坡的底部其嵌入悬挑起来，安装作为填充进步水平元素（如搭背或土钉）。如果滞后是用来保持垂直元素之间的土壤中，它被安装为挖掘工程的进行下去，或之前以填补位置。 吉尔- 马丁等人（2010）提供了一个数值计算程序，以获取圆形桩承受轴向载荷和统一标志（如悬臂桩）的单轴弯矩的最佳纵筋。他们开发的两种优化流程：用一个或两个直径为纵向钢筋。优化增强模式允许大量减少的设计要求钢筋的用量，这些减少纵向钢筋可达到50％相对传统的，均匀分布的加固方案。 加固桩集中纵向钢筋最佳的位置在受拉区。除了节约钢筋，所述非对称加强钢筋图案提高抗弯刚度，通过增加转动惯量的转化部分的时刻。这种增加的刚性可能会在一段时间内增加的变形与蠕变相关的费用。评估相对于传统的非对称加强桩的优点，对称，钢筋桩被服务的条件下全面测试来完成的，这种试验是为了验证结构的可行性和取得的变形的原位测量。 基于现场试验中，用于优化的加强图案的优点浇铸钻出孔（CIDH）在巴塞罗那的几个非对称加强桩的施工过程中观察到混凝土桩沿与测得的变形的结果在常规和描述优化桩。实验证据表明，非对称地增强桩变形比观察到在常规增强那些小。两桩类型（对称和非对称）具有相同的直径，并设计为抵抗基于极限强度设计相同的弯曲力矩;离散杆的尺寸和使用的条全数字的，导致类似的名义抗弯强度。