Applied to the cooling types of IC06, IC17, IC37, ICW37A86Z355-3A
通 风Ventilation 电枢回路Armature circuit 额定电压U N 下的转速Rotating speed under the voltage below rated voltage U N r/min 编号
series
no.220V 330V 440V 550V 660V
功率Output P N KW 额定电流Rated current Ia
A 效率Effi-ciency
*%
最大转速Max.speed n max r/min 励磁功率Exci-tation power Pf KW 转动惯量Moment of inertial J Kg.m 2风量volume Q m 3/S 风压pressure H Pa 电压降voltage drop U V 电感induc-tance La mH 0119759
35771.3600 4.711.2 1.5143052.2 1.5327
9635080.21000 4.711.2 1.5143051.2 1.4456
13334784.61500 4.711.2 1.5143050.9 1.3586
16834287.31500 4.711.2 1.5143050.1 1.3716
20233789.11500 4.711.2 1.5143049.4 1.302258
7844177.1800 4.611.2 1.4126040.30.92416
12443584.01500 4.611.2 1.5143039.70.87574
16742487.51500 4.711.2 1.5143038.80.86733
20941789.61500 4.611.2 1.5143038.20.86891
24840790.91500 4.611.2 1.5143037.30.8703365
10556681.61200 4.611.5 1.5143031.30.51579
16355587.01500 4.611.5 1.5143030.70.49794
21754089.71500 4.611.5 1.5143029.90.491008
26752491.31500 4.611.5 1.6161029.10.501223
31250692.21500 4.611.5 1.6161028.20.5104439
12766684.21500 4.712.2 1.5143025.70.36690
19465088.71500 4.712.2 1.5143025.10.35940
25562890.91500 4.712.2 1.6161024.40.361191
30960392.11500 4.712.2 1.6161023.40.371442
35557392.81500 4.712.2 1.7180022.40.3805578
16684887.01500 4.712.2 1.5143019.90.21898
24681190.51500 4.712.2 1.6161019.20.221219
31576892.01500 4.712.2 1.7180018.30.22154037171992.81540 4.712.2 1.8200017.20.2406
*效率符合GB 及IEC 标准包括励磁损耗
*efficiency conforms to the standard of GB and IEC (including excitation loss)
Applied to the cooling types of IC06, IC17, IC37, ICW37A86Z315-3A
通 风Ventilation 电枢回路Armature circuit 额定电压U N 下的转速Rotating speed under the voltage below rated voltage U N r/min 编号
series
no.220V 330V 440V 550V 660V
功率Output P N KW 额定电流Rated current Ia
A 效率Effi-ciency
*%
最大转速Max.speed n max r/min 励磁功率Exci-tation power Pf KW 转动惯量Moment of inertial J Kg.m 2风量volume Q m 3/S 风压pressure H Pa 电压降voltage drop U V 电感induc-tance La mH 0126957
32276.7900 4.1 6.5 1.1119040.1 1.2436
9132083.91500 4.0 6.5 1.1119039.9 1.2603
12632087.41800 4.0 6.5 1.1119039.9 1.2770
15831589.51800 4.0 6.5 1.1119039.3 1.2938
18931090.91800 4.0 6.5 1.1119038.6 1.202357
7640881.61200 4.1 6.7 1.1119030.00.72567
11840087.11700 4.0 6.7 1.1119029.60.69776
15939589.71800 4.0 6.7 1.1119029.20.6898719538291.21800 4.0 6.7 1.1119028.30.6903481
9750584.81500 4.0 6.7 1.1119024.10.43754
15050089.21800 4.0 6.7 1.1119023.90.421028
20049091.21800 4.0 6.7 1.1119023.40.421302
24046692.21800 4.0 6.7 1.1119022.40.431578280
45192.51800 4.0 6.7 1.1119021.80.4404607
119
60787.01800 4.07.1 1.1119019.40.29945
18260090.51800 4.07.1 1.1119019.10.281284
23858092.01800 4.07.1 1.1119018.60.28162428355092.31800 4.07.1 1.1119017.70.2905761
16080089.1180018007.1 1.1119016.00.171175
24078091.5180018007.1 1.1119015.60.17159230574391.8180018007.1 1.1119015.00.18
06
*效率符合GB 及IEC 标准包括励磁损耗
*efficiency conforms to the standard of GB and IEC (including excitation loss)
Applied to the cooling types of IC06, IC17, IC37, ICW37A86Z315-2A
通 风Ventilation 电枢回路Armature circuit 额定电压U N 下的转速Rotating speed under the voltage below rated voltage U N r/min 编号
series
no.220V 330V 440V 550V 660V
功率Output P N KW 额定电流Rated current Ia
A 效率Effi-ciency
*%
最大转速Max.speed n max r/min 励磁功率Exci-tation power Pf KW 转动惯量Moment of inertial J Kg.m 2风量volume Q m 3/S 风压pressure H Pa 电压降voltage drop U V 电感induc-tance La mH 0134460
33478.61200 3.1 5.3 1.0101037.50.91553
9532985.11500 3.1 5.3 1.0101036.80.86762
12932588.31800 3.1 5.3 1.0101036.50.85972
16031790.21800 3.1 5.3 1.0101035.60.851182
19031191.41800 3.1 5.3 1.0101035.00.8602453
7841483.11500 3.1 5.5 1.0101027.50.56714
12040487.91800 3.1 5.5 1.0101026.90.55977
16039590.31800 3.1 5.5 1.0101026.40.54124019538191.51800 3.1 5.5 1.0101025.60.5603605
9951185.91800 3.1 5.5 1.0101022.10.34945
15250489.81800 3.1 5.5 1.0101021.90.331287
20049091.51800 3.1 5.5 1.0101021.20.33162924046792.21800 3.1 5.5 1.0101020.30.35
04762
12261987.71800 3.1 5.8 1.1119018.10.221183
18059290.81800 3.1 5.8 1.1119017.40.23160622554992.01800 3.1 5.8 1.1119016.30.24
05959
16080089.71800 3.1 5.8 1.0101014.50.14147823576791.61800 3.1 5.8 1.0101014.10.14
06
*效率符合GB 及IEC 标准包括励磁损耗
*efficiency conforms to the standard of GB and IEC (including excitation loss)
Applied to the cooling types of IC06, IC17, IC37, ICW37A86Z315-1A
通 风Ventilation 电枢回路Armature circuit 额定电压U N 下的转速Rotating speed under the voltage below rated voltage U N r/min 编号
series
no.220V 330V 440V 550V 660V
功率Output P N KW 额定电流Rated current Ia
A 效率Effi-ciency
*%
最大转速Max.speed n max r/min 励磁功率Exci-tation power Pf KW 转动惯量Moment of inertial J Kg.m 2风量volume Q m 3/S 风压pressure H Pa 电压降voltage drop U V 电感induc-tance La mH 0143661
33580.01300 3.1 4.8 1.0100034.20.72696
9633086.01800 3.1 4.8 1.0100033.80.68958
12932489.01800 3.1 4.8 1.0100033.20.681219
16131890.61800 3.1 4.8 1.0100032.70.681481
19031091.61800 3.1 4.8 1.0100031.90.6902573
8042184.11700 3.1 5.00.984025.60.44901
12341288.51800 3.1 5.0 1.0101025.10.431229
16240090.61800 3.1 5.0 1.0101024.40.43155619438091.61800 3.1 5.0 1.0101023.30.4503760
10151886.61800 3.1 5.0 1.0101020.50.271185
15451090.11800 3.1 5.0 1.0101020.20.26161020550191.61800 3.1 5.0 1.0101019.90.26
04957
12362288.21800 3.1 5.3 1.0101016.70.18148118560890.91800 3.1 5.3 1.1119016.40.17
05120416080089.91800 3.1 5.3 1.0101013.70.1106
*效率符合GB 及IEC 标准包括励磁损耗
*efficiency conforms to the standard of GB and IEC (including excitation loss)
General description:
The Z series medium size DC motors are new products of the works developed with latest technology of design and manufacturing. There are six shaft heights for motor frames ranging from 315-560 mm.
The performance, outline dimensions and technical specifications of the motors conform to the standard of our country (GB) and International Electric Committee (IEC), while the mechanic dimensions tolerance of the motors conform to the standard of International Stadard Organization (ISO).
Working conditions:
1.It is allowed to install this seris motors in the environment with worse working conditions. However proper cooling and protection type should be chosen to keep the cleaness of the motors.
2. The cooling air should not contain acid or alkli material, which is harmful to the insulation and commutating pertormance of the motors.
3.In case the motors will be applied to marines, tropical and humid areas, or the areas with salt and humid air, please notify before signing contracts.
4.The motors can reach its rated power under the working condition of less than 1 OOOM sea level height and 40 ambient temperature.
5.The power source for the motors can be provided by static rectified source or DC generator.
6.In case the motor is powered by static rectified source, the number of pluse wave should not be less than 6, the peak ripple wave factor not be over 10under the rated speed, voltage and load current.
Type description:
As the frame is of angular thin steel laminations structure, the motor is small in volume, light in weight and can be powered by silicon contro!led rectified source. Meanwhile it has good commutating performance in case sudden change of load current occures. Insulation treatment of VPI applied on the integral stator and rotor makes the windings good in antihumidity performance, mechanical strength and insulation thermal conductivity. The armature core made up with silicon steel laminations has good magnetic conductivity. Ro!ling bearings with opearating oiling construction are adopted. The motor insulation is class F.
The mounting of the motors conform to ‵Symbols for Types of Construction and Mounting Arrangements of Rotating Electrical Machinery' specifieied in GB 997 and IEC 34-7.
bracket bearing, foot mounting with one cylindric shaft extension
bracket bearing, foot mounting with two cylindric shaft extension
IP 23 and IP 44 is adopted for the motors' protection of this series, which conform to the
standard of "Classification of Degrees of Protection Provided by Enclosures for Rotating Machines'
specified in GB 4942 and IEC B4-5.ICO8, ICI 7, ICB7 and ICW 37A86 is adopted for the cooling of
this series motors, which conform to the standard of Methods of Cooling Rotating Machinrery'
specified in GB 199S and IEC S4-6. Other types of protection and cooling required by customers
can be negotiated. The standard cooling air outlet locates on the side of driving end, (non
commutator end)
Products performance:
1 . Continuous working system (S1 ) is applied.
2. The standard rated voltage of this series motors are 220V , 380Vt 440Vt 550V and 660V .
The voltage beyond above scope can be negotiated when placing ordears.
3. Separate excitation is the basic excitation type of this series motors. Four terminals of the
excitation winding are divided into two groups. In case the two groups are in series or parallel
connection. the excitation voltage is 220V or 100V respectively. Excitation voltage beyond the scope
can be negotiated.
Forced excitation is allowed with the voltage of less than 500V . During forced excitation I the
transient excitation current can exceed the rated excitation current slightly until the excitation current
gets stablilized.
4. Short time overload capability:
The DC motors (class A) can sustain the short time (1 min) overload specified in the following list:
Percent of the rated current
Percent of the basic speed
occasionally
often used 100
200
300 and above 200
180*160140
175160*150
125The DC motors (class B) can sustain the short time (1 min) overload specified in the following list:
Percent of the rated current
Percent of the basic speed
occasionally
often used 100
200
300 and above 200180*200180*175160*175160*160140
*The data in brackets are applied in case the basic speed of the motors is equal to or greater than the speed specified in the following list:
shaft height(mm)315355400450500560 basic speed(r/min)10001000900800710630
The occasionally used short time overload capability refers to the motors' capability of sustaining continuous overload within 1 minute in emergent or unusual cases The transient switching device of breaker is suggested to be rectified according to such capability.
The often used short time overload capability. as a part of normal operating period refers to the motors' capability of sustaining overload repetatly.
After short time overload operation. light load operation is necessary to restrict the load root-mean-square of the whole load period within its continuous rating.
The DC motors (Class B) can sustain following contiunous load:
(1)Under the rated armature voltage and rated speed the motor can be continuously operated with 115 overload. In this case, temperature rise will be relatively higher, and the other
performance may be different from those under specified ratings.
(2)Soon after continuous operation under rated armature voltage and rated speed. the motor can be operated with 125overload for two hours. In this case. temperature rise will not exceed the
specified value, while the other performance may be different from those under specified raings.
Under lower overload, longer time overload is allowed. For the motors (class B). the occasionally used overload times is 2.5 times (under the rated speed) within 15 sec. (please consult with the manufacturer in detail)
5. Speed adjustment.
No speed adjustment is specified for this series motors. Any special requirements in this field by customers can be discussed.
6. Current variation:
The allowable current variation( di/dt )of this series motors under all speeds and loads is 200 times of the rated current per second.
7.Noise and vibration:
The noise level of this series motors conform to the specifications stipulated in ‘Noise measuring Method for Electric Machines of GB2806 and Standard of Noise Level for Electric Machines' of IEC34-9.
Vibration of this series motors conform to the specifications stipulated in vibration Measuring Method for Electric. Machines of GB2807 and Vibration Measuring Method and Limit for Electric Machines of IEC34-14.
Capacity choosing:
Class A: DO motors
Please refer to the technical data list, Customers can choose motor type and specifications according to the required capacity, rotating speed, voltage and etc.
Class B: DC motors
Except the rated output of the motors, which is lower than that of class A motors with same shaft height and foot axial length, the other technical data are basically the same as those of class A motors. Shou!d the specification of class B motor be given, one can use the specification list for class A motors to choose the preliminary type of class B. First of all, the rated power of class B motor shall be enlarged by 25%, according to which a corresponding type and specification can be selected out from the specification list for class A. The "A"in the symbol of the selected type,
however, shall be replaced with "B" and the capacity shall be replaced with the non-enlarged power(that means with the original capacity of the class B). Final specifications and data can be discussed between customers and manufacturer.
For example:
Motor required by customer:
class B motor of 96kW 220V 185r/min
Power enlarged by 25%:
120kW 220V 185r/min
Corresponding type in the specification list for class A:
Z450-2A(118kW 220V 179r/min)
Type transformed from class A to class B:
Z450-2B(approximate 96kW 220V 185r/min)
The motor of this type can basically meet the customer’s requirements.
Output-speed conversion (for motors of class A):
Besides the five voltages and corresponding outputs and speeds specified in the technical data list, other voltage grades and their corresponding outputs and speeds can be derived from motors of any specifications. (However, it is not allowed to exceed the allowable maximum voltage of such specification)
概述
本厂开发的Z系列中型直流电动机是采用最新技术设计制造的新产品该系列电机的机座有六个中心高从315560毫米
本系列电动机的性能外形安装尺寸及技术要求均符合国家标准(GB)和国际电工委员会标淮(IEC)电机各部份机械尺寸公差符合国际标准化委员会标准(ISO)
使用条件
1本系列电动机可以安装在环境条件比较恶劣的场合但必须选择正确的冷却方法和
防护等级以保持电机内部的清洁
2本系列电动机的冷却空气中应不含有酸碱等对电机的绝缘和换向性能有损害的气体
3本系列电动机如使用于船舶和湿热带地区以及工作环境中有盐雾潮湿等应另行
协议
4本系列电动机的额定功率是指在海拔不超过1000米环境空气温度不超过40的条件下
5本系列电动机的供电电源采用静止整流电源也可采用直流发电机电源
6当电动机采用静止整流电源供电时整流器的脉波数应不小于6在额定基速额定电压和额定负载电流下电源的峰值纹波因数不超过10
本系列电动机的机座采用簿钢板多角形叠片结构具有体积小重量轻等优点适用可
控硅整流电源在负载电流的迅速变化下电动机有良好的换向性能整个定子和转子采用
无溶剂漆真空压力浸渍处理(VPI)使绕组具有良好的抗潮能力和机械强度并且绝缘和导热
性能优良电枢铁心由硅钢片叠装而成具有良好的导磁性能本系列电动机全部采用滚动
轴承不停机加油结构本系列电动机的绝缘等级为F级
本系列电动机的安装型式符合GB997和lEC347电机结构及安装型式代号
本系列电动机的防护等级根据GB4942?1和IEC345电机外壳防护分级标准外壳防护等级有IP23和IP44两种电动机冷却方法根据GB1993和IEC346电机冷却方法标准有IC06IC17IC37和ICW37A86四种用户如需其他防护等级和冷却方法可另行协
商本系列电动机标准型式的冷却空气入口在电机的传动端
非换向器端产品性能
1本系列电动机的定额为连续工作方式(S1)
2本系列电动机的标准额定电压有220V 330V 440V 550V 660V
五种也可派生出其他等级的电压需在订货时商定
3
本系列电动机的基本励磁方式为他励
励磁绕组有四个引线端子
分为两组两组
串联时励磁电压为220V 并联时励磁电压为110V 其他励磁电压等级可在订货时商定
本系列电动机允许强行励磁强励电压不得超过500V 强励时励磁电流可瞬时略超过额定励磁电流但励磁电流稳定后不得超过
4
本系列电动机的短时过载能力第一类直流电动机A 类能承受下表所规定的短时一分钟过载
额定电流的百分数
基速的百分数偶尔使用经常使用100
200300以上
200180*160140175160*150
125第二类直流电动机B
类能承受
下表所规定的短时一分钟
过载额定电流的百分数
基速的百分数
偶尔使用
经常使用100
200
300以上200180*200180*175160*175160*160140*当电动机的基速等于或大于下表规定的转速时用括号内数值
中心高毫米
315355400450500560基速转/分10001000900800710630
偶尔使用的短时过载能力是指很少发生或在紧急情况下电动机在一分钟内承受超过连
续额定负载的能力建议将断路的瞬时开断装置按偶尔使用的短时过载能力整定经常使用的短时过载能力是指作为正常工作周期的一部份电动机反复承受超过额定负
载的能力
短时过载运行之后必须轻载运行使电动机整个负载周期的负载均方根值不超过其连
续定额
本系列第二类直流电动机(B类)应能承受下列连续负载
(1)在额定电枢电压和额定转速范围内带115额定功率负载连续运行在此负载下温
升将较高其他特性可能与额定条件下运行的规定不同
(2)在额定电枢电压下和额定转速范围内在额定负载连续运行之后紧接着以125额
定功率负载运行二小时温升不超过规定数值其他性能可能与额定条件下运行的规定值不
同
电动机在较低的过载倍数下允许较长的过载时间对第二类直流电动机(B类)偶尔使
用时过载倍数允许达到2.5倍(在额定基速时)时间不超过15秒(但需与制造厂协商) 5转速调整率
本系列电动机的转速调整率不作规定用户如有特殊要求应在订货时商定
6电流变化率
在所有转速及负载下本系列电动机的电流变化率以允许达200倍额定电流/每秒
7噪声振动
本系列电动机的噪声符合GB2806电机噪声测定方法和IEC349电机噪声限值标准的规定
本系列电动机的振动符合GB2807电机振动测定方法和IEC3414电机振动测试
方法及限值标准的规定
容量选择
第一类直流电动机(A类)
这类电动机的详细数据见技术数据表用户可以根据所需的容量转速和电压等选定电
机的型号和规格
第二类直流电动机(B类)
这类电动机的额定输出功率比相同中心高相同底脚轴向长度的A类电动机要略为下降
其他数据基本相同若已知B类电动机规格亦可用A类规格表初步选型B类电动机初选时B类电动机的额定功率应放大25左右然后按放大后的功率在A类规格表中选取相关的型号规格但对应的型号中A需改为B对应的功率仍为未放大时的功率(即B类电机的原功率)最终型号规格可由用户与制造厂商定
举例说明如下
使用场合需96kW 220V 185r/min B类电机
放大功率25%对应120kW 220V 185r/min A类电机
查A类规格表得相近型号Z4502A118kw 220V 179r/min
将型号改成Z4502B此型号近似代表96kw 220V 185r/mirlB类电机可以初步满足
使用场合要求
功率和转速的换算(对A类)
本系列电动机除技术数据表中所列的五种电压和相应的功率转速外任何一个规格的电
机都可以派生成其他等级的电压(但不得超过该规格允许的最高电压)和相应的功率及转速
Applied to the cooling types of IC06, IC17, IC37, ICW37A86Z355-4A
通 风Ventilation 电枢回路Armature circuit 额定电压U N 下的转速Rotating speed under the voltage below rated voltage U N r/min 编号
series
no.220V 330V 440V 550V 660V
功率Output P N KW 额定电流Rated current Ia
A 效率Effi-ciency
*%
最大转速Max.speed n max r/min 励磁功率Exci-tation power Pf KW 转动惯量Moment of inertial J Kg.m 2风量volume Q m 3/S 风压pressure H Pa 电压降voltage drop U V 电感induc-tance La mH 0115357
35768.6600 5.213.1 1.6161057.9 1.9257
9434978.3800 5.313.1 1.6161056.8 1.8360
13134783.21200 5.313.1 1.6161056.4 1.7464
16634186.21500 5.313.1 1.6161055.5 1.7568
20033688.21500 5.313.1 1.6161054.7 1.702199
7644074.6800 5.413.1 1.6161044.6 1.2325
12142982.51200 5.413.1 1.6161043.5 1.13450
16542386.31500 5.513.1 1.6161042.9 1.1576
20741588.71500 5.413.1 1.6161042.2 1.1702
24740790.21500 5.413.1 1.6161041.4 1.103286
10356479.81000 5.313.4 1.6161034.60.65456
16155385.91500 5.413.4 1.6161033.90.63627
21553888.91500 5.313.4 1.6161033.10.62797
26652490.71500 5.313.4 1.7180032.30.63968
31350991.81500 5.413.4 1.7180031.40.6404346
12566482.81200 5.314.1 1.6161028.30.46546
19264787.81500 5.314.1 1.6161027.70.45746
25462890.31500 5.314.1 1.7180026.90.45946
31060591.71500 5.314.1 1.7180026.00.461147
35857892.61500 5.314.1 1.8200024.90.4805455
16484486.01500 5.414.1 1.6161021.90.27710
24581189.91500 5.414.1 1.7180021.10.27965
31677191.71500 5.414.1 1.7180020.20.281220
37572692.71550 5.414.1 1.8200019.10.301475
42468193.31500 5.414.1 1.9222018.10.3106*效率符合GB 及IEC 标准包括励磁损耗
*efficiency conforms to the standard of GB and IEC (including excitation loss)
Applied to the cooling types of IC06, IC17, IC37, ICW37A86Z400-2A
通 风Ventilation 电枢回路Armature circuit 额定电压U N 下的转速Rotating speed under the voltage below rated voltage U N r/min 编号
series
no.220V 330V 440V 550V 660V
功率Output P N KW 额定电流Rated current Ia
A 效率Effi-ciency
*%
最大转速Max.speed n max r/min 励磁功率Exci-tation power Pf KW 转动惯量Moment of inertial J Kg.m 2风量volume Q m 3/S 风压pressure H Pa 电压降voltage drop U V 电感induc-tance La mH 0112856
36465.6500 5.920.8 1.8131063.9 2.3219
9636776.1800 5.820.8 1.9145064.4 2.0311
13536481.61000 5.720.8 1.9145064.0 1.9402
17336184.91200 5.720.8 1.9145063.5 1.8493
21135987.11500 5.720.8 1.9145063.1 1.802156
7143770.3500 5.720.8 1.9145055.2 1.5260
11743179.51000 5.720.8 1.9145054.5 1.4364
16242684.11200 5.720.8 1.9145053.9 1.4468
20642286.91500 5.720.8 1.9159053.3 1.3573
25041988.81500 5.720.8 2.0159053.0 1.303210
9353675.5800 5.921.3 1.9145043.60.93341
15053282.91200 5.921.3 1.9145043.40.87472
20552586.71500 5.921.3 1.9145042.90.85604
25851888.91500 5.921.3 2.0159042.30.84735
31051290.41500 5.921.3 2.0159041.80.8404296
12869580.91000 5.821.3 1.9145033.00.51472
20168886.61500 5.821.3 1.9145032.70.49647
27267989.41500 5.821.3 2.0159032.30.48823
33966791.11500 5.721.3 2.0159031.80.48998
40265392.21500 5.821.3 2.1174031.20.4805359
15883683.61200 5.821.7 1.9145027.70.35566
24482188.41500 5.721.7 2.0159027.30.34773
32580390.71500 5.721.7 2.1174026.70.34979
40178392.01500 5.821.7 2.1174026.10.341186
47276292.91500 5.721.7 2.2190025.40.3506466
199102686.11500 6.021.7 2.0159022.30.22727
30199790.01500 6.021.7 2.1174021.70.22987
39596691.81500 6.021.7 2.2190021.10.221248
47992992.81500 6.021.7 2.3206020.40.23151055188693.31510 6.021.7 2.4223019.50.24*效率符合GB 及IEC 标准包括励磁损耗
*efficiency conforms to the standard of GB and IEC (including excitation loss)
Applied to the cooling types of IC06, IC17, IC37, ICW37A86Z500-2A
通 风Ventilation 电枢回路Armature circuit 额定电压U N 下的转速Rotating speed under the voltage below rated voltage U N r/min 编号
series
no.220V 330V 440V 550V 660V
功率Output P N KW 额定电流Rated current Ia
A 效率Effi-ciency
*%
最大转速Max.speed n max r/min 励磁功率Exci-tation power Pf KW 转动惯量Moment of inertial J Kg.m 2风量volume Q m 3/S 风压pressure H Pa 电压降voltage drop U V 电感induc-tance La mH 01160158
88078.6500 6.581.1 2.6121037.90.53257
25187185.1800 6.581.1 2.7129037.50.50353
34085788.41000 6.581.1 2.7129036.90.49450
42584290.31200 6.581.1 2.8138036.30.49546
50682591.61200 6.581.1 2.8138035.60.5002193
194104481.8600 6.581.1 2.6121031.30.37305
302102687.31000 6.581.1 2.7129030.80.35417
405100690.01200 6.581.1 2.8138030.20.35530
50198191.61200 6.581.1 2.8138029.50.35642
59095392.71200 6.581.1 2.9147028.50.3603261
256133185.2800 6.582.9 2.7129024.40.21410
390129789.61000 6.582.9 2.8138023.90.21558
514125791.71200 6.582.9 2.9147023.20.21706
626121292.91200 6.582.9 2.9147022.40.21854
724116093.71200 6.582.9 3.0156021.60.2204352
339171788.01000 6.586.3 2.8138019.00.12546
505165391.31200 6.586.3 2.9147018.30.12740
651157592.91200 6.586.3 3.0156017.60.13934774148793.81200 6.586.3 3.1166016.70.1305414
402201089.41200 6.586.3 2.9147015.90.09641
588191192.21200 6.586.3 3.1166015.30.09866742178893.41200 6.586.3 3.2176014.40.09
06
*效率符合GB 及IEC 标准包括励磁损耗
*efficiency conforms to the standard of GB and IEC (including excitation loss)
Applied to the cooling types of IC06, IC17, IC37, ICW37A86Z500-1A
通 风Ventilation 电枢回路Armature circuit 额定电压U N 下的转速Rotating speed under the voltage below rated voltage U N r/min 编号
series
no.220V 330V 440V 550V 660V
功率Output P N KW 额定电流Rated current Ia
A 效率Effi-ciency
*%
最大转速Max.speed n max r/min 励磁功率Exci-tation power Pf KW 转动惯量Moment of inertial J Kg.m 2风量volume Q m 3/S 风压pressure H Pa 电压降voltage drop U V 电感induc-tance La mH 01205163
89180.4600 5.868.4 2.4105034.20.40327
25687986.31000 5.868.4 2.5113033.80.39449
34586389.31200 5.868.4 2.6121033.20.38572
43084791.01200 5.868.4 2.6121032.60.38693
51082892.21200 5.868.4 2.7129032.00.4202246
199105583.3800 5.868.4 2.4105028.30.29388
308103888.21200 5.868.4 2.5113027.90.27530
410101390.71200 5.868.4 2.6121027.20.27671
50598592.11200 5.868.4 2.7129026.60.28814
59395693.01200 5.868.4 2.7129025.80.2903333
261134686.21000 5.870.1 2.6121022.60.17520
395130890.11200 5.870.1 2.7129022.00.16707
517126292.01200 5.870.1 2.8138021.30.17894
627121393.11200 5.870.1 2.9147020.60.171082
721115593.71200 5.870.1 3.0156019.70.1804447
344173188.81200 5.873.6 2.7129017.20.10692
508165891.71200 5.873.6 2.8138016.60.10936
652157693.11200 5.873.6 3.0156015.90.101180769147893.81200 5.873.6 3.1166015.00.1105526
406202489.81200 5.873.6 2.8138014.90.07810
590191692.31200 5.873.6 3.0156014.20.071095737177893.41200 5.873.6 3.2176013.30.07
06
*效率符合GB 及IEC 标准包括励磁损耗
*efficiency conforms to the standard of GB and IEC (including excitation loss)
Applied to the cooling types of IC06, IC17, IC37, ICW37A86Z450-4A
通 风Ventilation 电枢回路Armature circuit 额定电压U N 下的转速Rotating speed under the voltage below rated voltage U N r/min 编号
series
no.220V 330V 440V 550V 660V
功率Output P N KW 额定电流Rated current Ia
A 效率Effi-ciency
*%
最大转速Max.speed n max r/min 励磁功率Exci-tation power Pf KW 转动惯量Moment of inertial J Kg.m 2风量volume Q m 3/S 风压pressure H Pa 电压降voltage drop U V 电感induc-tance La mH 018686
55466.63007.557.8 2.7195062.7 2.3146
14655376.95007.557.8 2.7195062.6 2.0205
20454782.27007.557.8 2.7195061.9 1.9265
26254485.48007.557.8 2.8208061.6 1.9325
31853987.610007.557.8 2.8208061.0 1.902108
11166971.63507.557.8 2.7195052.0 1.5180
18165880.66007.557.8 2.7195051.2 1.4250
25165485.08007.557.8 2.7195050.9 1.3321
31864687.710007.557.8 2.8208050.3 1.3392
38363789.512007.557.8 2.8208049.6 1.303140
14280776.75007.560.1 2.7195041.60.96226
22779783.98007.560.1 2.7195041.10.90312
30978687.410007.560.1 2.7195040.50.89398
38877389.612007.560.1 2.8208039.90.88485
46375991.115007.560.1 2.8208039.20.8804204
203109581.86007.560.1 2.8208032.00.48324
317107887.310007.560.1 2.9223031.50.47443
425105690.015007.560.1 2.9223030.90.46564
527103191.715007.560.1 2.9223030.20.47683
622100592.815007.560.1 3.0237029.50.4705249
249130984.38007.562.4 2.9223026.90.33390
382127888.912007.562.4 2.9223026.30.33532
505124091.315007.562.4 3.0237025.60.33674619120192.615507.562.4 3.0237024.80.3306310
308157387.110007.562.4 2.8208020.90.22484
461151690.815007.562.4 2.9223020.20.22655598145292.515007.562.4 3.0237019.40.23
*效率符合GB 及IEC 标准包括励磁损耗
*efficiency conforms to the standard of GB and IEC (including excitation loss)
Applied to the cooling types of IC06, IC17, IC37, ICW37A86Z450-3A
通 风Ventilation 电枢回路Armature circuit 额定电压U N 下的转速Rotating speed under the voltage below rated voltage U N r/min 编号
series
no.220V 330V 440V 550V 660V
功率Output P N KW 额定电流Rated current Ia
A 效率Effi-ciency
*%
最大转速Max.speed n max r/min 励磁功率Exci-tation power Pf KW 转动惯量Moment of inertial J Kg.m 2风量volume Q m 3/S 风压pressure H Pa 电压降voltage drop U V 电感induc-tance La mH 0111291
56369.7350 6.748.2 2.4157056.3 1.7187
15155879.1600 6.748.2 2.5169055.8 1.6262
21055483.9800 6.748.2 2.5169055.4 1.5337
26754786.81000 6.748.2 2.5169054.8 1.5412
32354288.71200 6.748.2 2.5169054.2 1.502140
11567474.2500 6.748.2 2.5169047.1 1.2229
18666682.2800 6.748.2 2.5169046.5 1.1318
25666086.21000 6.748.2 2.5169046.1 1.0406
32365088.61200 6.748.2 2.6181045.5 1.0496
38864190.31500 6.748.2 2.6181044.9 1.003180
14781679.0600 6.750.5 2.4157037.20.74287
23280485.3800 6.750.5 2.5169036.70.71395
31579388.51200 6.750.5 2.5169036.20.69503
39377890.41500 6.750.5 2.6181035.50.69611
46776291.71500 6.750.5 2.6181034.80.7004261
208110383.5800 6.750.5 2.5169028.60.38411
322108488.41500 6.750.5 2.6181028.10.36561
430106190.81500 6.750.5 2.7195027.60.36712
531103592.31500 6.750.5 2.8208026.90.37863
624100593.21500 6.750.5 2.8208026.20.3805316
254131885.71000 6.752.8 2.6181024.00.26494
387128689.81500 6.752.8 2.7195023.50.26672
509124491.91500 6.752.8 2.8208022.80.26850620120093.01500 6.752.8 2.9223022.00.2706393
312158287.91200 6.752.8 2.6181019.10.17609
465152491.21500 6.752.8 2.8208018.40.18827599145292.81500 6.752.8 2.9223017.10.18
*效率符合GB 及IEC 标准包括励磁损耗
*efficiency conforms to the standard of GB and IEC (including excitation loss)