Unit 4 Principle of Design
What is design
A design is a plan, a means to an end. When you selected your clothes this morning, you were designing. You made certain choices probably based on how you wanted to look, feel, and act today.
Choices must also be made to select and arrange type and illustrations that make up a printed product. Understanding the principles of good design will help you make intelligent choices.
Principles of design
Certain principles are basic to understanding graphic design. These include proportion, balance, contrast, rhythm, unity and color. These principles provide guidelines for developing a successful printed product.
Proportion. Proportion refers to how parts of a whole relate to one another and to the whole.
Page proportion. Before a job can be printed, its general size and shape must be decided upon. Usually the product itself will determine this. For example, a business card must be easily carried in a wallet or shirt pocket. A poster must be large enough to be read at a distance.
After approximating, the designer must decide upon a final size and shape for the product. Usually this final decision is based on how a product will look rather than on its use.
Generally rectangles are more pleasing to the eye than squares. Square shapes seem dull and unmoving; rectangles seem to convey motion and direction. A good proportion for a rectangular page is approximately two units wide and three units long. Business cards measure about 2*3.5 inches. Photographs may measure 4*5.5*7, or 8*10 inches. And, of course, most business letterhead measure 8.5*11 inches.
Element proportion. The size and shape of type and illustrations in a printed product must also be properly proportioned. Again, rectangular elements will usually appear more attractive than square shapes. The size and shape of each element and the surrounding white space must each be considered in relation to all the other elements.
One easy and quick way to reduce or enlarge illustrations or copy is the diagonal-line method. It is a valuable aid to making design decisions.
Balance. Balance is a visual effect. When type and illustrations are arranged in a pleasing way, a feeling of stability or equilibrium is conveyed. When elements are out of balance, the printed product may look top heavy or too heavy on the right or left.
There are two types of balance: formal and informal. Figure 2-7 shows a layout that is balanced formally. A center line drawn through this layout would cut each major element in half. Figure 2-8 is an informally balanced layout. Type and illustrations are not placed on a common center line. However, the layout still looks balanced. Elements appear to
be in equilibrium.
Optical and true centers. Printing located at the vertical center of a piece of paper appears to be too low. Major type or illustration elements should not be placed at the true center of a page. Instead they should be raised approximately one-tenth the distance from the true center to the top of the page. This position is known as the optical center. It is part of the page that the eye sees as being the center. Figure 2-9 shows the relationship between optical center and true center.
Contrast. Contrast provides emphasis to a word, a series of words, or an illustration. Contrast can also be used to relieve monotony in a printed message. Several ways of providing contrast are shown in Figure 2-10.
Rhythm. Eye movement across a printed page may be slow or swift, left or right, upward or downward, flowing or jerky. We call this motion rhythm.
It is possible to lead a reader’s eye in a desired direction by placement of type and illustrations. Figure 2-11 shows how this is done.
Unity. Unity is the harmonious relationship among the various type and illustration elements in a printed job.
Two or more typefaces should be combined in a single job only if they look right together. Typefaces with similar shapes and weights may be combined if done with care. Using several different type sizes and
styles in a single layout distracts from the clarity of the message and should be avoided, Figure 2-12.
The use of illustrations of various sizes and shapes can also distract from the harmony of a job. Unity is achieved by using the same basic shape throughout, Figure 2-13.
Color. Selecting ink color and paper color for a printed job is part of the design process. You must have already seen how color can be used to emphasize a word, a series of words, or an illustration in some colored books. Color can do much more than just provide emphasis, however. Ink and paper colors can attract attention, hold attention, and even communicate directly with the viewer.
Color attracts attention. A visual message cannot be successfully sent if the intended receiver does not look at it. Color can be used to attract attention to the message. Bright colors, for example, will draw attention to billboard’s and posters that are read from a distance.
Color holds attention. Color also holds a viewer’s attention over an extended period of time. Imagine trying to read a book whose text is printed with orange ink on red paper. Your head would probably begin to ache after only a very short time. Colors that are easiest on the eyes include dark green, blue, and violet.
Besides colors that are easy on the eyes, three should be sufficient contrast between paper color and ink color. Black or blue ink on white
paper are the combinations most often used.
Color communicates.Color are classical as warm or cool. Red, orange, and yellow are considered warm colors. They are the colors of sun and fire. Blue, green and violet are considered cool colors. These are the colors of nature: blue water, green grass, and the violet darkness of night.
People are affected by color. Warm colors tend to excite people; cool colors tend to calm them down.
Besides affecting emotions, colors can communicate directly with people. Red, for example, may say stop! Red may indicate danger. Green, however, may say that all is well; it tells the viewer to continue. Colors can be used to communicate, so choose them with care.
十个主题：
友情Friendship、爱情Love、家庭Family、事业Career、电影Movie、音乐Music、成功Success、失败Failure、理想Ideal、选择Choose
中国联通China Unicom 中国移动China Mobile 网络容量network capacity 交换容量exchange capacity 扩容Capacity Expansion 平滑升级smooth upgrade 射频Radio Frequencies 接收灵敏度Receive Sensitivity: 数据Data Options 传输速率Data Rate 电源部分Power supply 数据接口Data Interface 天线接口Antenna Interface 传输速率Baud Rate 用户交互界面User Interface 认证Certifications 网络数据传输数率net data transfer rate 联通无限U-Max 旗下subordinate] 品牌trademark U-Info 互动视界U-Magic 神奇宝典 U-Net 掌中宽带 U-Mail 彩e U-Map 定位之星 U-Sms 联通在信 应用服务Application Service 产业价值链industrial value chain 战略目标strategic objective 渠道channel 转型transition/Transformation 推广extension 针对aim at 电信telecommunication 整合conformity 市场渗透率market penetration factor 微观的microcosmic 科学技术science and technology 地理环境geographic environment 宏观的macroscopical 供应链supply chain 产品种类product variety
通信一班序号：28 姓名：粟清明学号：14102301239 JXTA is a crystallization by Sun company's chief scientist Bill Joy's more than twenty years of brewing."JXTA technology is a platform for Network programming and calculation.To solve the modern distribution calculation especially peer-to-peer (Peer to Peer, P2P) in the calculation of the problem". [1] JXTA research project,which will provide a new framework that make the user more convenient to access to connect on the Internet's personal computer resources, thus further expand Internet 's space. At the same time JXTA is also the Sun's "ONE Internet" strategic continuance, and will take a more positive attitude to compete with the .net strategy of Microsoft and Hailstorm plan . JXTA agreement defines a set of six agreement based on XML, the organization of node into node group, release and found some resources, communication and mutual monitoring provides standardized method. (Endpoint Routing Protocol,ERP) is used for node found routing.To send a message to other nodes, and through the potential firewall and connection. (Rendezvous Protocol,RVP) s used for the nodes in the group to spread information.(Peer Resolver Protocol,PRP) is Used to one or more points to send general inquiries, and receive the response of inquiries. (Peer Discovery Protocol, PDP) is used to release and found advertising resources. (Peer Information Protocol, PIP) used to get other nodes state Information. (Peer Binding Protocol, PBP), can let a node with another node or between more nodes to set up virtual communication channel or pipeline. Compared to the nowadays general communication mode .P2P has many advantages, but it also has a lot of problems waiting to be solved.Firstly, each Peer in P2P is an active participant,in order to make the network performance increase, they need more Peer's participation, so that will result in the network's huge, manage this network will is a complex project; Secondly, P2P agreement compares with traditional
第一课 土木工程学土木工程学作为最老的工程技术学科，是指规划，设计，施工及对建筑环境的管理。此处的环境包括建筑符合科学规范的所有结构，从灌溉和排水系统到火箭发射设施。 土木工程师建造道路，桥梁，管道，大坝，海港，发电厂，给排水系统，医院，学校，公共交通和其他现代社会和大量人口集中地区的基础公共设施。他们也建造私有设施，比如飞机场，铁路，管线，摩天大楼，以及其他设计用作工业，商业和住宅途径的大型结构。此外，土木工程师还规划设计及建造完整的城市和乡镇，并且最近一直在规划设计容纳设施齐全的社区的空间平台。 土木一词来源于拉丁文词“公民”。在1782年，英国人John Smeaton为了把他的非军事工程工作区别于当时占优势地位的军事工程师的工作而采用的名词。自从那时起，土木工程学被用于提及从事公共设施建设的工程师，尽管其包含的领域更为广阔。 领域。因为包含范围太广，土木工程学又被细分为大量的技术专业。不同类型的工程需要多种不同土木工程专业技术。一个项目开始的时候，土木工程师要对场地进行测绘，定位有用的布置，如地下水水位，下水道，和电力线。岩土工程专家则进行土力学试验以确定土壤能否承受工程荷载。环境工程专家研究工程对当地的影响，包括对空气和地下水的可能污染，对当地动植物生活的影响，以及如何让工程设计满足政府针对环境保护的需要。交通工程专家确定必需的不同种类设施以减轻由整个工程造成的对当地公路和其他交通网络的负担。同时，结构工程专家利用初步数据对工程作详细规划，设计和说明。从项目开始到结束，对这些土木工程专家的工作进行监督和调配的则是施工管理专家。根据其他专家所提供的信息，施工管理专家计算材料和人工的数量和花费，所有工作的进度表，订购工作所需要的材料和设备，雇佣承包商和分包商，还要做些额外的监督工作以确保工程能按时按质完成。 贯穿任何给定项目，土木工程师都需要大量使用计算机。计算机用于设计工程中使用的多数元件（即计算机辅助设计，或者CAD）并对其进行管理。计算机成为了现代土木工程师的必备品，因为它使得工程师能有效地掌控所需的大量数据从而确定建造一项工程的最佳方法。 结构工程学。在这一专业领域，土木工程师规划设计各种类型的结构，包括桥梁，大坝，发电厂，设备支撑，海面上的特殊结构，美国太空计划，发射塔，庞大的天文和无线电望远镜，以及许多其他种类的项目。结构工程师应用计算机确定一个结构必须承受的力：自重，风荷载和飓风荷载，建筑材料温度变化引起的胀缩，以及地震荷载。他们也需确定不同种材料如钢筋，混凝土，塑料，石头，沥青，砖，铝或其他建筑材料等的复合作用。 水利工程学。土木工程师在这一领域主要处理水的物理控制方面的种种问题。他们的项目用于帮助预防洪水灾害，提供城市用水和灌溉用水，管理控制河流和水流物，维护河滩及其他滨水设施。此外，他们设计和维护海港，运河与水闸，建造大型水利大坝与小型坝，以及各种类型的围堰，帮助设计海上结构并且确定结构的位置对航行影响。 岩土工程学。专业于这个领域的土木工程师对支撑结构并影响结构行为的土壤和岩石的特性进行分析。他们计算建筑和其他结构由于自重压力可能引起的沉降，并采取措施使之减少到最小。他们也需计算并确定如何加强斜坡和填充物的稳定性以及如何保护结构免受地震和地下水的影响。 环境工程学。在这一工程学分支中，土木工程师设计，建造并监视系统以提供安全的饮用水，同时预防和控制地表和地下水资源供给的污染。他们也设计，建造并监视工程以控制甚至消除对土地和空气的污染。他们建造供水和废水处理厂，设计空气净化器和其他设备以最小化甚至消除由工业加工、焚化及其他产烟生产活动引起的空气污染。他们也采用建造特殊倾倒地点或使用有毒有害物中和剂的措施来控制有毒有害废弃物。此外，工程师还对垃圾掩埋进行设计和管理以预防其对周围环境造成污染。
第一课现代数字设计及数字信号处理 课文 A: 数字信号处理简介 1.什么是数字信号处理？ 数字信号处理，或DSP，如其名称所示，是采用数字方式对信号进行处理。在这种情况下一个信号可以代表各种不同的东西。从历史的角度来讲，信号处理起源于电子工程，信号在这里意味着在电缆或电话线或者也有可能是在无线电波中传输的电子信号。然而，更通用地说，一个信号是一个可代表任何东西--从股票价格到来自于远程传感卫星的数据的信息流。术语“digital”来源于“digit”，意思是数字（代可以用你的手指计数），因此“digital”的字面意思是“数字的，用数字表示的”，其法语是“numerique”。一个数字信号由一串数字流组成，通常（但并非一定）是二进制形式。对数字信号的处理通过数字运算来完成。 数字信号处理是一个非常有用的技术，将会形成21世纪的新的科学技术。数字信号处理已在通信、医学图像、雷达和声纳、高保真音乐产生、石油开采等很广泛的领域内引起了革命性的变革。这些领域中的每一个都使得DSP技术得到深入发展，有该领域自己的算法、数学基础，以及特殊的技术。DSP发展的广度和深度的结合使得任何个人都不可能掌握已发展出的所有的DSP技术。DSP教育包括两个任务：学习应用数字信号处理的通用原则及学习你所感兴趣的特定领域的数字信号处理技术。 2.模拟和数字信号 在很多情况下，所感兴趣的信号的初始形式是模拟电压或电流，例如由麦克风或其它转换器产生的信号。在有些情况下，例如从一个CD播放机的可读系统中输出的信号，信号本身就是数字的。在应用DSP技术之前，一个模拟信号必须转换成数字信号。例如，一个模拟电压信号，可被一个称为模数转换器或ADC的电路变换成数字信号。该转换器产生一系列二进制数字作为数字输出，其值代表每个采样时刻的输入模数转换设备的电压值。 3.信号处理 通常信号需要以各种方式处理。例如，来自于传感器的信号可能被一些没用的电子“噪声”污染。测心电图时放在病人胸部的电极能测量到当心脏及其它肌肉活动时微小的电压变化。信号也常会被来自于电源的电磁干扰所影响。采用滤波电路处理信号至少可以去掉不需要的信号部分。如今，对信号滤波以增加信号的质量或抽取重要信息的任务越来越多地由DSP技术完成而不是采用模拟电路完成。 4.DSP的发展和应用 数字信号处理的发展起源于60年代大型数字计算机进行数字处理的应用，如使用快速傅立叶变换（FFT）可以快速计算信号的频谱。这些技术在当时并没有被广泛应用，因为通常只有在大学或者其它的科研机构才有合适的计算机。 由于当时计算机很贵，DSP仅仅局限于少量的非常重要的应用。先驱们的探索工作主要集中在4个关键领域：雷达和声纳，用于保卫国家安全；石油开采，可以赚大量的钱；空间探索，其中的数据是不能重复产生的；及医学图像，可以救治生命。 20世纪80年代到90年代个人电脑的普及使得DSP产生了很多新的应用。与以往由军方或政府的需求驱动不同，DSP突然间由商业市场的需求驱动了。任何认为自己能在这个飞速发展的领域赚钱的人都会立即成为DSP供应商。DSP通过在移动电话、CD播放器及语音邮件等产品中应用进入了公共应用领域。 这些技术革命是自上而下发生的。在20世纪80年代早期，DSP是电子工程专业的研究
一、二、 十一、汉译英时分多址：TDMA （Time Division Multiple Address/ Time Division Multiple Access）2、通用无线分组业务：GPRS General Packet Radio Service 3、国际电报电话咨询委员会：CCITT 4、同步数字体系：SDH Synchronous Digital Hierarchy （同步数字序列） 5、跳频扩频：FHSS frequency hopping spread spectrum 6、同步转移模块：STM synchronous transfer module 7、综合业务数字网：ISDN Integrated Services Digital Network 8、城域网：MAN Metropolitan Area Network 9、传输控制协议/互联网协议：TCP/IP Transmission Control Protocol/Internet Protocol 10、服务质量：QOS Quality of Service 11、中继线：trunk line 12、传输速率：transmission rate 13、网络管理：network management 14、帧结构：frame structure 15、移动手机：Mobile Phone 手机 Handset 16、蜂窝交换机：（Cellular switches）（电池开关cell switch）(cell 蜂房) 17、天线：Antenna 18、微处理器：microprocessor 19、国际漫游：International roaming 20、短消息：short message 21、信噪比：SNR(Signal to Noise Ratio) 22、数字通信：Digital communication 23、系统容量：system capacity 24、蜂窝网：cell network（cellular network）（Honeycomb nets） 25、越区切换：Handover 26、互联网：internet 27、调制解调器：modem 28、频谱：spectrum 29、鼠标：Mouse 30、电子邮件：electronic mail E-mail 31、子网：subnet 32、软件无线电：software defined radios 33、网络资源：network resources 十二、英译汉 1、mobile communication：移动通信 2、Computer user：计算机用户 3、Frame format：帧格式 4、WLAN：wireless local area network 无线局域网络 5、Communication protocol：通信协议 6、Transmission quality：传输质量 7、Remote terminal：远程终端 8、International standard：国际标准 9、GSM：全球移动通信系统 Global System for Mobile Communications 10、CDMA：码分多址Code Division Multiple Access 11、ITU：国际电信联盟 International Telecommunication Union 12、PCM：pulse code modulation 脉冲编码调制 13、WDM：波分复用Wavelength Division Multiplex 14、FCC：联邦通信委员会 Federal communications commission 15、PSTN：公用电话交换网 Public Switched Telephone Network 16、NNI：网络节点借口Network Node Interface 17、WWW：万维网World Wide Web 18、VOD：视频点播Video-On-Demand 19、VLR：访问位置寄存器 Visitor Location Register 20、MSC：移动交换中心Mobile Switching Centre 21、HLR：原籍位置寄存器Home Location Register 22、VLSI：超大规模集成电路 Very Large Scale Integrated Circuits 23、Bluetooth technology：蓝牙技术 24、Matched filter：匹配滤波器 25、ADSL：非对称数字用户环路Asymmetrical Digital Subscriber Loop非对称数字用户线路(Asymmetric Digital Subscriber Line) 26、GPS：全球定位系统Global Position System 27、ATM：异步传输模式Asynchronous Transfer Mode
a common way to construct steel truss and prestressed concrete cantilever spans is to counterbalance each cantilever arm with another cantilever arm projecting the opposite direction,forming a balanced cantilever. they attach to a solid foundation ,the counterbalancing arms are called anchor arms /thus,in a bridge built on two foundation piers,there are four cantilever arms ,two which span the obstacle,and two anchor arms which extend away from the obstacle,because of the need for more strength at the balanced cantilever's supports ,the bridge superstructure often takes the form of towers above the foundation piers .the commodore barry bridge is an example of this type of cantilever bridge 一种常见的方法构造钢桁架和预应力混凝土悬臂跨度是每一个悬臂抗衡预测相反的方向臂悬臂，形成一个平衡的悬臂。他们重视了坚实的基础，制约武器被称为锚武器/因此，在两个基础上建一座桥桥墩，有四个悬臂式武器，这两者之间跨越的障碍，和两个锚武器哪个延长距离的障碍，因为为更多的在平衡悬臂的支持力量的需要，桥梁上部结构往往表现为塔墩基础之上形成的准将巴里大桥是这种类型的例子悬臂桥 steel truss cantilever support loads by tension of the upper members and compression of the lower ones .commonly ,the structure distributes teh tension via teh anchor arms to the outermost supports ,while the compression is carried to the foundation beneath teh central towers .many truss cantilever bridges use pinned joints and are therefore statically determinate with no members carrying mixed loads 钢桁架悬臂由上层成员和下层的紧张压缩支持负载。通常，结构分布通过锚武器的最外层的支持紧张，而压缩抬到下方的中央塔的基础。桁架悬臂许多桥梁使用固定的关节，是静定，没有携带混合负载的成员，因此 prestressed concrete balanced cantilever bridges are often built using segmental construction .some steel arch bridges are built using pure cantilever spans from each sides,with neither falsework below nor temporary supporting towers and cables above ,these are then joined with a pin,usually after forcing the union point apart ,and when jacks are removed and the bridge decking is added the bridge becomes a truss arch bridge .such unsupported construction is only possible where appropriate rock is available to support the tension in teh upper chord of the span during construction ,usually limiting this method to the spanning of narrow canyons 预应力混凝土平衡悬臂桥梁往往建立使用段施工。一些钢拱桥是使用各方面的纯悬臂跨度既无假工作下面也临时支撑塔和电缆上面，这些都是再加入了一根针，通常在迫使工会点外，当插孔删除，并添加桥梁甲板桥成为桁架拱桥，这种不支持的建设，才可能在适当情况下的岩石可用于支持在施工期间的跨度弦上的张力，通常限制这狭隘的峡谷跨越方法 an arch bridge is a bridge with abutments at each end shaped as a curved arch .arch bridges work by transferring the weight of the bridge and its loads partially into a horizontal thrust restrained by the abutments at either side .a viaduct may be made from a series of arches ,although other more economical structures are typically used today 在拱桥桥台的桥梁，是一个在一个弧形拱状，每年年底。拱桥通过转移到由部分在两边的桥台水平推
Unit 13 Comparison between GSM and CDMA GSM与CDMA之比较 Using CDMA/FDD technology, subscribers of CDMA cellular mobile communication system can transmit their information simultaneously through the same channel. On the other hand, the GSM system adopts TDMA/FDD method to transmit and distinguish information from different GSM mobile stations. In addition, in favor of QCELP arithmetic, RAKE receiver, power control and soft switching etc., CDMA shows more advantages in its system performance than the GSM, such as greater anti-interference capability, bigger system capacity, higher successful connection ratio, fewer off-line chances, low probability of intercept(LPI), and so on. 使用码分多址/频分双工技术，用户的蜂窝移动通信系统的传输信息的同时，通过同样的渠道。另一方面，该系统采用时分多址/频分双工传输的方法和识别信息从不同的移动台。此外，有利于中国电信集团广州研发中心算术，耙式接收器，功率控制和软开关等，显示出更多的优势在码分多址系统性能比，如更高的抗干扰能力，更大的系统容量，连接成功率较高，离线的机会少，低截获概率（低截获概率），等。 1, Power Control and RAKE Receiver功率控制和瑞克接收机 When different subscribers send their information to the same BS(base station), different signal power caused by different transmitting distances will consequentially cause interference with each other, especially for those MSs(mobile station) being far away from BS will be seriously disturbed because of their almost submerged signals by signals of the close-to-BS MSs.[2] p110 In order to solve this problem and keep high system performance, power control technique is introduced in CDMA communication system, which can effectively overcome this cross-disturbance. As one of the core techniques in CDMA cellular mobile communication system, power control can make the signal power from all subscribers to the BS equivalent through adjusting the transmitting power from each subscriber. 为解决这一问题，保持较高的系统性能，功率控制技术介绍了码分多址通信系统，它可以有效地克服这cross-disturbance。作为一个核心技术在蜂窝移动通信系统的功率控制，可以使信号功率从所有用户的学士学位相当于通过调整发射功率，从每个用户。 Power control can be not only divided to open-loop control and closed-loop control, but also to forward (down) power control and backward (up) power control. For open-loop control method, subscriber adjusts emitting power according to the measured frame error probability, while for the closed-loop power control, base station measures the signal-to-noise ratio of received signals and then adjust the transmitting power of corresponding MS. 功率控制不仅可以分为开环控制和闭环控制，而且还提出了（下）功率控制和反向功率控制（上）。开环控制方法，用户调整发射功率根据测量帧错误概率，同时为闭环功率控制，基站测量接收信号的信噪比，然后调整发射功率相应的女士 The backward power control in CDMA system can be divided into two kinds of control technique, the open-loop backward power control only used by mobile station, and the closed-loop
通信工程专业英语翻译 JXTA is a crystallization by Sun company's chief scientist Bill Joy's more than twenty years of brewing."JXTA technology is a platform for Network programming and calculation.To solve the modern distribution calculation especially peer-to-peer (Peer to Peer, P2P) in the calculation of the problem".[1] JXTA research project,which will provide a new framework that make the user more convenient to access to connect on the Internet's personal computer resources, thus further expand Internet 's space. At the same time JXTA is also the Sun's "ONE Internet" strategic continuance, and will take a more positive attitude to compete with the .net strategy of Microsoft and Hailstorm plan . JXTA agreement defines a set of six agreement based on XML, the organization of node into node group, release and found some resources, communication and mutual monitoring provides standardized method.(Endpoint Routing Protocol,ERP) is used for node found routing.To send a message to other nodes, and through the potential firewall and connection.(Rendezvous Protocol,RVP) s used for the nodes in the group to spread information.(Peer Resolver Protocol,PRP) is Used to one or more points to send general inquiries, and receive the response of inquiries.
(1)Concrete and reinforced concrete are used as building materials in every country. In many, including Canada and the United States, reinforced concrete is a dominant structural material in engineered construction. (1)混凝土和钢筋混凝土在每个国家都被用作建筑材料。在许多国家，包括加拿大和美国，钢筋混凝土是一种主要的工程结构材料。 (2)The universal nature of reinforced concrete construction stems from the wide availability of reinforcing bars and the constituents of concrete, gravel, sand, and cement, the relatively simple skills required in concrete construction. (2) 钢筋混凝土建筑的广泛存在是由于钢筋和制造混凝土的材料，包括石子，沙，水泥等，可以通过多种途径方便的得到，同时兴建混凝土建筑时所需要的技术也相对简单。 (3)Concrete and reinforced concrete are used in bridges, building of all sorts, underground structures, water tanks, television towers, offshore oil exploration and production structures, dams, and even in ships. (3)混凝土和钢筋混凝土被应用于桥梁，各种形式的建筑，地下结构，蓄水池，电视塔，海上石油平台，以及工业建筑，大坝，甚至船舶等。 (4)Reinforce concrete structures consist of a series of individual members that interact to support the loads placed on the structure. The floor of concrete buildings is often built of concrete joist-slab construction. (4)钢筋混凝土结构由一系列单独构件组成，这些构件通过相互作用共同抵抗施加在结构上的荷载。混凝土建筑的楼层通常采用肋梁楼盖的形式。 (5)A series of parallel ribs or joists support the load from the top slab. The reactions supporting the joists apply load to the beams, which in turn are supported by the columns. (5)一系列的平行梁肋或次梁抵抗其上楼板传来的荷载，次梁的反力作为荷载施加在主粱上，主粱则支承在柱上。 (6)The slab transfers load laterally to the joists, and serves as the top flange of the joists, which act as T-shaped beams that transmit the load to the beams running at right angles to the joists. (6)楼板将荷载垂直传递给次梁，并且作为上翼缘和次梁一起形成T形截面梁，将荷载传递给与次梁正交的主粱。 (7)Some floors of have a slab-and-beam design in which the slab spans between beams, which in turn apply loads to the columns. (7)一些楼层被设计成梁板结构，即楼板直接支承在相邻的主粱上，主粱再将荷载传递到柱上。 (8)Concrete is strong in compression but weak in tension. As a result, cracks develop whenever loads, or restrained shrinkage or temperature changes, give rise to tensile stresses in excess of the tensile strength of the concrete. (8)混凝土的抗压能力很强但抗拉能力很弱。因此，当荷载、受约束的收缩或温度变化所引起的拉应力超过其抗拉强度时，混凝土中的裂缝就会开展。 (9)The construction of a reinforced concrete member involves building a form or mould in the shape of the member being built. The form must be strong enough to support the weight and hydrostatic pressure of the wet concrete. (9)钢筋混凝土构件的制作需要一个与构件形状相同的模子，其必须具有足够的强度以抵抗湿混凝土的重量和流动压力。 (10)The reinforcement is placed in this form and held in place during the concreting
与其他不少考研热门专业一样，英语专业研究生招生的研究方向设置非常细，不同学校的方向设置类别不一，名称也各异。 比如上海外国语大学英语语言文学专业下设有语言方向、文学方向、教学法方向、翻译学方向、口译学方向、英语国家文化方向、跨文化交际方向7个方向。而同样是外语类专业院校，北京外国语大学该专业设置的研究方向明显不同，广东外语外贸大学该专业设置的8个研究方向更与前两所学校无一相同。 在这种情况下，不少备考英语专业的同学对“如何选择研究方向”这样的问题一头雾水，也就不足为怪了。 就英语专业考研而言，外国语言文学下设置的二级学科很多，包括英语语言文学、俄语语言文学、法语语言文学、德语语言文学、日语语言文学、印度语言文学、阿拉伯语语言文学、欧洲语言文学、亚非语言文学、外国语言学及应用语言学、翻译学11个学科。其中，涉及英语专业的二级学科主要有3个：英语语言文学、外国语言学及应用语言学、翻译学。 一般院校的英语专业多设置英语语言文学和外国语言学及应用语言学两个专业，所以，英语专业考研的专业设置其实比较简单，一般就是两大专业。不过，这两个专业被不同学校细化研究方向以后，就变得复杂了。如前面说到的上海外国语大学英语语言文学专业下设有7个方向，这7个方向进一步细分，小的研究方向达37个之多。 英语专业的研究方向虽名目众多，却也并非杂乱无章，其设置仍是遵循一定规律的。粗略分析，这些研究方向可分为传统研究方向和新兴研究方向两大类。 传统研究方向 传统研究方向，顾名思义，指的是设置多年的老牌研究方向，这些研究方向一般学校都有开设。 1. 文学方向 开设学校：全国绝大部分招收英语专业研究生的学校。据2007年的招生统计，仅有17所招收英语专业研究生的学校没有开设文学方向。 研究内容：主要研究英美文学研究领域中的重大问题，目的在于提高文学素养、理论水平和研究能力。 就业方向：此方向开设学校多，招生人数较多，就业范围非常广泛，一般为教师、研究人员。所学课程：西方文论、美国经典文学、美国现当代文学、英国经典文学、文学批评、英国文学选读、美国文学选读、17～19世纪英国文学研究、希腊戏剧研究、英国长篇小说选读、美国长篇小说选读、英国诗歌选读、美国诗歌选读、英美散文鉴赏、王尔德戏剧欣赏、英国短篇小说欣赏、美国短篇小说鉴赏、英美戏剧鉴赏、中国文学史、中国古典文学选读等。 2. 语言学 开设学校：全国绝大部分招收英语专业研究生的学校。据2007年的招生统计，仅有9所招收英语专业研究生的学校没有开设语言学方向。 研究内容：语言学是我国高校近年来普遍设置的一个综合性的语言研究学科。主要学习语言学理论及语言在各种学科中的应用，不同学校侧重点有所不同。 通过大量阅读有关文献、论文和最新的研究成果报告，使学生对于语言学的形成和发展有进一步的了解，并了解现代语言学的最新动向和最新发展。语言学特别强调和重视研究生的广泛阅读，包括专业的外语期刊和近几年的语言学相关论文。 就业方向：该专业理论性较强，主要面向大中专教师及研究人员。 所学课程：语言学概论、语用学与话语分析、应用语言学、现代语法学、语义学、语用学、英语语体学与文体学、语篇分析等。 3. 英美文化研究 开设学校：南京大学、上海外国语大学、天津师范大学等。
土木工程专业英语原文 及翻译 文档编制序号：[KKIDT-LLE0828-LLETD298-POI08]
08 级土木(1) 班课程考试试卷 考试科目专业英语 考试时间 学生姓名 所在院系土木学院 任课教师 徐州工程学院印制 Stability of Slopes Introduction Translational slips tend to occur where the adjacent stratum is at a relatively shallow depth below the surface of the slope:the failure surface tends to be plane and roughly parallel to the slips usually occur where the adjacent stratum is at greater depth，the failure surface consisting of curved and plane sections． In practice, limiting equilibrium methods are used in the analysis of slope stability. It is considered that failure is on the point of occurring along an assumed or a known failure surface．The shear strength required to maintain a condition of limiting equilibrium is compared with the available shear strength of the soil，giving the average factor of safety along the failure surface．The problem is considered in two dimensions，conditions of plane strain being assumed．It has been shown that a two-dimensional analysis gives a conservative result for a failure on a three-dimensional(dish-shaped) surface． Analysis for the Case of φu =0 This analysis, in terms of total stress，covers the case of a fully saturated clay under undrained conditions, . For the condition immediately after construction．Only moment equilibrium is considered in the analysis．In section, the potential failure surface is assumed to be a circular arc. A trial failure surface(centre O，radius r and length L a where F is the factor of safety with respect to shear strength．Equating moments about O：