外文出处： 《Exploiting Software How to Break Code》By Greg Hoglund, Gary McGraw Publisher : Addison Wesley Pub Date : February 17, 2004 ISBN : 0-201-78695-8 译文标题： JDBC接口技术 译文： JDBC是一种可用于执行SQL语句的JavaAPI（ApplicationProgrammingInterface应用程序设计接口）。它由一些Java语言编写的类和界面组成。JDBC为数据库应用开发人员、数据库前台工具开发人员提供了一种标准的应用程序设计接口，使开发人员可以用纯Java语言编写完整的数据库应用程序。 一、ODBC到JDBC的发展历程 说到JDBC，很容易让人联想到另一个十分熟悉的字眼“ODBC”。它们之间有没有联系呢？如果有，那么它们之间又是怎样的关系呢？ ODBC是OpenDatabaseConnectivity的英文简写。它是一种用来在相关或不相关的数据库管理系统（DBMS）中存取数据的，用C语言实现的，标准应用程序数据接口。通过ODBCAPI，应用程序可以存取保存在多种不同数据库管理系统（DBMS）中的数据，而不论每个DBMS使用了何种数据存储格式和编程接口。 1．ODBC的结构模型 ODBC的结构包括四个主要部分：应用程序接口、驱动器管理器、数据库驱动器和数据源。应用程序接口：屏蔽不同的ODBC数据库驱动器之间函数调用的差别，为用户提供统一的SQL编程接口。 驱动器管理器：为应用程序装载数据库驱动器。 数据库驱动器：实现ODBC的函数调用，提供对特定数据源的SQL请求。如果需要，数据库驱动器将修改应用程序的请求，使得请求符合相关的DBMS所支持的文法。 数据源：由用户想要存取的数据以及与它相关的操作系统、DBMS和用于访问DBMS的网络平台组成。 虽然ODBC驱动器管理器的主要目的是加载数据库驱动器，以便ODBC函数调用，但是数据库驱动器本身也执行ODBC函数调用，并与数据库相互配合。因此当应用系统发出调用与数据源进行连接时，数据库驱动器能管理通信协议。当建立起与数据源的连接时，数据库驱动器便能处理应用系统向DBMS发出的请求，对分析或发自数据源的设计进行必要的翻译，并将结果返回给应用系统。 2．JDBC的诞生 自从Java语言于1995年5月正式公布以来，Java风靡全球。出现大量的用java语言编写的程序，其中也包括数据库应用程序。由于没有一个Java语言的API，编程人员不得不在Java程序中加入C语言的ODBC函数调用。这就使很多Java的优秀特性无法充分发挥，比如平台无关性、面向对象特性等。随着越来越多的编程人员对Java语言的日益喜爱，越来越多的公司在Java程序开发上投入的精力日益增加，对java语言接口的访问数据库的API 的要求越来越强烈。也由于ODBC的有其不足之处，比如它并不容易使用，没有面向对象的特性等等，SUN公司决定开发一Java语言为接口的数据库应用程序开发接口。在JDK1．x 版本中，JDBC只是一个可选部件，到了JDK1．1公布时，SQL类包（也就是JDBCAPI）
毕业设计外文资料翻译 题目POLISHING OF CERAMIC TILES 抛光瓷砖 学院材料科学与工程 专业复合材料与工程 班级复材0802 学生 学号20080103114 指导教师 二〇一二年三月二十八日
MATERIALS AND MANUFACTURING PROCESSES, 17(3), 401–413 (2002) POLISHING OF CERAMIC TILES C. Y. Wang,* X. Wei, and H. Yuan Institute of Manufacturing Technology, Guangdong University ofTechnology, Guangzhou 510090, P.R. China ABSTRACT Grinding and polishing are important steps in the production of decorative vitreous ceramic tiles. Different combinations of finishing wheels and polishing wheels are tested to optimize their selection. The results show that the surface glossiness depends not only on the surface quality before machining, but also on the characteristics of the ceramic tiles as well as the performance of grinding and polishing wheels. The performance of the polishing wheel is the key for a good final surface quality. The surface glossiness after finishing must be above 208 in order to get higher polishing quality because finishing will limit the maximum surface glossiness by polishing. The optimized combination of grinding and polishing wheels for all the steps will achieve shorter machining times and better surface quality. No obvious relationships are found between the hardness of ceramic tiles and surface quality or the wear of grinding wheels; therefore, the hardness of the ceramic tile cannot be used for evaluating its machinability. Key Words: Ceramic tiles; Grinding wheel; Polishing wheel
第一节层次分析 1.1句法结构的层次性和层次分析 1、句法结构的层次性： 一个句子或是句法格式表面上看是线性排列，内部有一种层次的透景。（松紧程度不一样） 如：他刚来。（这三个词内部的松紧程度不一样。“刚”和“来”关系紧密，“他”和“刚”关系疏远，“刚”和“来”先组合，再和“他”组合） 2、结构的三个特点： *整体性（作为一个结构，一定具有整体性。） *可分割性（作为一个结构，一定可以被分割成多个部分。） *有规则性（一个结构作为一个整体，一定是由好几部分组成的，这好几个部分组合的时候，它是按照一定规则组成的。） 如：形声字：形+声，再+字（“形声字”这个词，不是一些语素随便凑成，而是按一定规则组成的。）【有两个以上语素组合时，其内部一定有层次结构。】 *音节也是有层次的，如：天[tian55] 这个音节也是有层次的： 声调——超音段成分 声母+韵母——音段成分 韵母——韵头+韵部(韵基) 韵基——韵腹（主要元音）+韵尾 【由此，我们可以说的宽泛一点，这叫语言的层次构造，这种构造，是语言的基本特性。不论是语音、词汇、句子都有这样的层析构造问题。】 3、层次分析：在分析一个句子，或是句法结构的时候，将句法构造的层次性考虑进来，并按其构造层次，逐层进行分析，在分析时，指出每一层面的直接组成成分，并说明直接组成成分之间的关系。这种分析手段就是层次分析。 如：他刚来 “他刚来”的直接组成成分：他+刚来主谓 谓语“刚来”的直接组成成分：刚+来状中 4、层次分析包含两个内容： 二他所写的文章怎么切分？ 切分：怎样断句 定性： 层次分析的三种主要表示方法：从小到大、框式、树型图: 5、怎么切分？ 同一结构如何切分 例句：他所参观的工厂。 名词性偏正结构定中 他所参观？ 他所参观的工厂 他所参观的工厂会导致他和工厂有领属关系 所以他所参观的工厂 他所参观怎么分析？ 他参观
Thermoelectric Properties of n -Type Bi 2Te 3/PbSe 0.5Te 0.5Segmented Thermoelectric Material SEJIN YOON,1JUN-YOUNG CHO,1HYUN KOO,1SUNG-HWAN BAE,1SEUNGHYUN AHN,1GWI RANG KIM,1JIN-SANG KIM,2and CHAN PARK 1,3,4 1.—Department of Materials Science and Engineering,Seoul National University,Daehak-dong,Gwanak-gu,Seoul,Republic of Korea. 2.—Electronic Materials Research Center,Korea Institute of Science and Technology,Wolgok 2-dong,Seongbuk-gu,Seoul,Republic of Korea. 3.—Research Institute of Advanced Materials,Seoul National University,Daehak-dong,Gwanak-gu,Seoul,Republic of Korea. 4.—e-mail:pchan@snu.ac.kr To investigate the effects of segmentation of thermoelectric materials on performance levels,n -type segmented Bi 2Te 3/PbSe 0.5Te 0.5thermoelectric material was fabricated,and its output power was measured and compared with those of Bi 2Te 3and PbSe 0.5Te 0.5.The two materials were bonded by diffusion bonding with a diffusion layer that was $18l m thick.The electrical conductivity,Seebeck coef?cient,and power factor of the segmented Bi 2Te 3/PbSe 0.5Te 0.5sample were close to the average of the values for Bi 2Te 3and PbSe 0.5Te 0.5.The output power of Bi 2Te 3was higher than those of PbSe 0.5Te 0.5and the segmented sample for small D T (300K to 400K and 300K to 500K),but that of the segmented sample was higher than those of Bi 2Te 3and PbSe 0.5Te 0.5when D T exceeded 300K (300K to 600K and 300K to 700K).The output power of the segmented sample was about 15%and 73%higher than those of the Bi 2Te 3and PbSe 0.5Te 0.5samples,respectively,when D T was 400K (300K to 700K).The ef?ciency of thermoelectric materials for large temperature differences can be enhanced by segmenting materials with high performance in different temperature ranges. Key words:Thermoelectric material,segmented thermoelectric material, Bi 2Te 3,Pb(Se,Te),output power INTRODUCTION Many studies have focused on improving the energy conversion ef?ciency of thermoelectric materials for their potential use in power-generation and cooling systems.The ef?ciency of a thermoelectric material is characterized by its dimensionless ?gure of merit [zT =(S 2r T )/j ,where S is the Seebeck coef?cient,r is the electrical conductivity,and j denotes the thermal conductivity].1 The upper limit of the ef?ciency (g ?g c ??????????????? 1tzT p à1 =???????????????1tzT p t1àg c h i ,where g c =D T /T hot is the Carnot ef?ciency,and zT is the average zT over the temperature range)is determined by the temperature difference D T ,2,3which means that better energy conversion can be expected with the use of a larger D T .Most thermoelectric materials,how-ever,have high zT over a very limited temperature range,indicating that most thermoelectric materials cannot effectively utilize such a large D T .High ther-moelectric energy conversion ef?ciency can be obtained when a large D T can be used,which can only be realized by using a thermoelectric material with high zT value across a broad temperature range.Materials with large average zT values over a wide temperature range have to be used to convert large amounts of energy from a large D T .Connection of materials with high zT values in different tempera-ture ranges,forming a segmented thermoelectric (Received May 10,2013;accepted October 14,2013;published online November 27,2013) Journal of ELECTRONIC MATERIALS,Vol.43,No.2,2014 DOI:10.1007/s11664-013-2869-4ó2013TMS 414
Load and Ultimate Moment of Prestressed Concrete Action Under Overload-Cracking Load It has been shown that a variation in the external load acting on a prestressed beam results in a change in the location of the pressure line for beams in the elastic range.This is a fundamental principle of prestressed construction.In a normal prestressed beam,this shift in the location of the pressure line continues at a relatively uniform rate,as the external load is increased,to the point where cracks develop in the tension fiber.After the cracking load has been exceeded,the rate of movement in the pressure line decreases as additional load is applied,and a significant increase in the stress in the prestressing tendon and the resultant concrete force begins to take place.This change in the action of the internal moment continues until all movement of the pressure line ceases.The moment caused by loads that are applied thereafter is offset entirely by a corresponding and proportional change in the internal forces,just as in reinforced-concrete construction.This fact,that the load in the elastic range and the plastic range is carried by actions that are fundamentally different,is very significant and renders strength computations essential for all designs in order to ensure that adequate safety factors exist.This is true even though the stresses in the elastic range may conform to a recognized elastic design criterion. It should be noted that the load deflection curve is close to a straight line up to the cracking load and that the curve becomes progressively more curved as the load is increased above the cracking load.The curvature of the load-deflection curve for loads over the cracking load is due to the change in the basic internal resisting moment action that counteracts the applied loads,as described above,as well as to plastic strains that begin to take place in the steel and the concrete when stressed to high levels. In some structures it may be essential that the flexural members remain crack free even under significant overloads.This may be due to the structures’being exposed to exceptionally corrosive atmospheres during their useful life.In designing prestressed members to be used in special structures of this type,it may be necessary to compute the load that causes cracking of the tensile flange,in order to ensure that adequate safety against cracking is provided by the design.The computation of the moment that will cause cracking is also necessary to ensure compliance with some design criteria. Many tests have demonstrated that the load-deflection curves of prestressed beams are approximately linear up to and slightly in excess of the load that causes the first cracks in the tensile flange.(The linearity is a function of the rate at which the load is applied.)For this reason,normal elastic-design relationships can be used in computing the cracking load by simply determining the load that results in a net tensile stress in the tensile flange(prestress minus the effects of the applied loads)that is equal to the tensile strength of the concrete.It is customary to assume that the flexural tensile strength of the concrete is equal to the modulus of rupture of the
毕业设计（论文）外文文献翻译 文献、资料中文题目：软件开发概念和设计方法文献、资料英文题目： 文献、资料来源： 文献、资料发表（出版）日期： 院（部）： 专业： 班级： 姓名： 学号： 指导教师： 翻译日期： 2017.02.14
外文资料原文 Software Development Concepts and Design Methodologies During the 1960s, ma inframes and higher level programming languages were applied to man y problems including human resource s yste ms,reservation s yste ms, and manufacturing s yste ms. Computers and software were seen as the cure all for man y bu siness issues were some times applied blindly. S yste ms sometimes failed to solve the problem for which the y were designed for man y reasons including: ?Inability to sufficiently understand complex problems ?Not sufficiently taking into account end-u ser needs, the organizational environ ment, and performance tradeoffs ?Inability to accurately estimate development time and operational costs ?Lack of framework for consistent and regular customer communications At this time, the concept of structured programming, top-down design, stepwise refinement，and modularity e merged. Structured programming is still the most dominant approach to software engineering and is still evo lving. These failures led to the concept of "software engineering" based upon the idea that an engineering-like discipl ine could be applied to software design and develop ment. Software design is a process where the software designer applies techniques and principles to produce a conceptual model that de scribes and defines a solution to a problem. In the beginning, this des ign process has not been well structured and the model does not alwa ys accurately represent the problem of software development. However,design methodologies have been evolving to accommo date changes in technolog y coupled with our increased understanding of development processes. Whereas early desig n methods addressed specific aspects of the
本科毕业设计（外文翻译） 题目居住区交往空间规划与设计 院（系部）xxx学院 专业名称xx 年级班级xx 学生姓名xx 指导教师xx xx 年xx 月x 日 Planning and Design of Association Space of residential District
Xia dong liang 【Abstract】:The association space refers to the indoor and outdoor space for communication between residents.The article presents an overall discussion of the necessity，hierarchy and functionality of association space,with a wish to create positive and healthy association atmosphere and stimulate good communication among residents so that the residential area can become a homeland full of love and harmony． 【Keyword】:residential area；association space；necessity；hierarchy；Functionality 【Foreword】：As the housing system reform and the rapid development of real estate, urban residential areas large urban settlements have emerged on the layout of residential buildings, public buildings, public green space, life and living facilities such as roads, to provide urban residents live in the community and The establishment, is an integral part of the city. Exchanges between the living room area residents is to communicate and exchange of indoor and outdoor space. At this stage, people's living standards greatly improved the living environment of continuous improvement district. Developers should not only focus on residential construction and the reasonable comfort, paying greater attention to the construction of residential environment. However, the current environment in the construction of residential areas, they are often the natural ecology of greening the environment is much more to consider, and the promotion of exchanges between the residents of the space environment to consider less, environmental construction can not meet the occupants of the psychological characteristics and needs. From the basic physiological needs gradually to meet the psychological and cultural fields of promoting a higher level, the residential area is not only the function of living, but also people's thinking and feelings of the local exchange. Therefore, the strengthening of exchanges between the residential areas of space construction, increase residential neighbourhood affinity, should be developed in the planning and construction of residential areas should also consider the issue. How to conduct exchanges between the residential areas of space planning and design, improve people's quality of life, the author of his own real estate development
The development of plastic mould China's industrial plastic moulds from the start to now, after more than half a century, there has been great development, mold levels have been greatly enhanced. Mould has been at large can produce 48-inch big-screen color TV Molded Case injection mold, 6.5 kg capacity washing machine full of plastic molds, as well as the overall car bumpers and dashboards, and other plastic mould precision plastic molds, the camera is capable of producing plastic mould , multi-cavity mold small modulus gear and molding mold. --Such as Tianjin and Yantai days Electrical Co., Ltd Polaris IK Co. manufactured multi-cavity mold VCD and DVD gear, the gear production of such size precision plastic parts, coaxial, beating requirements have reached a similar foreign the level of product, but also the application of the latest gear design software to correct contraction as a result of the molding profile error to the standard involute requirements. Production can only 0.08 mm thickness of a two-cavity mold and the air Cup difficulty of plastic doors and windows out of high modulus, and so on. Model cavity injection molding manufacturing accuracy of 0.02 to 0.05 mm, surface roughness Ra0.2 μ m, mold quality, and significantly increase life expectancy, non-hardening steel mould life up to 10~ 30 million, hardening steel form up to 50 ~ 10 million times, shorten the delivery time than before, but still higher than abroad,and the gap between a specific data table. Process, the multi-material plastic molding die, efficient multicolor injection mould, inserts exchange structure and core pulling Stripping the innovative design has also made great progress. Gas-assisted injection molding, the use of more mature technologies, such as Qingdao Hisense Co., Ltd., Tianjin factory communications and broadcasting companies, such as mold manufacturers succeeded in 29 ~ 34-inch TV thick-walled shell, as well as some parts on the use of gas-assisted mould technology Some manufacturers also use the C-MOLD gas-assisted software and achieved better results. Prescott, such as Shanghai, such as the new company will provide users with gas-assisted molding equipment and technology. Began promoting hot runner mold, and some plants use rate of more than 20 percent, the general heat-thermal hot runner, or device, a small number of units with the world's advanced level of rigorous hot runner-needle device, a small number of units with World advanced level of rigorous needle-hot runner mould. However, the use of hot runner overall rate of less than 10%, with overseas compared to 50 ~ 80%, the gap larger. In the manufacturing technology, CAD / CAM / CAE technology on the level of application of a new level to the enterprise for the production of household appliances representatives have introduced a considerable number of CAD / CAM systems, such as the United States EDS UG Ⅱ,
I / 11 本科毕业设计外文翻译 <2018届） 论文题目基于WEB 的J2EE 的信息系统的方法研究 作者姓名[单击此处输入姓名] 指导教师[单击此处输入姓名] 学科(专业 > 所在学院计算机科学与技术学院 提交日期[时间 ]
基于WEB的J2EE的信息系统的方法研究 摘要：本文介绍基于工程的Java开发框架背后的概念，并介绍它如何用于IT 工程开发。因为有许多相同设计和开发工作在不同的方式下重复，而且并不总是符合最佳实践，所以许多开发框架建立了。我们已经定义了共同关注的问题和应用模式，代表有效解决办法的工具。开发框架提供：<1）从用户界面到数据集成的应用程序开发堆栈；<2）一个架构，基本环境及他们的相关技术，这些技术用来使用其他一些框架。架构定义了一个开发方法，其目的是协助客户开发工程。 关键词：J2EE 框架WEB开发 一、引言 软件工具包用来进行复杂的空间动态系统的非线性分析越来越多地使用基于Web的网络平台，以实现他们的用户界面，科学分析，分布仿真结果和科学家之间的信息交流。对于许多应用系统基于Web访问的非线性分析模拟软件成为一个重要组成部分。网络硬件和软件方面的密集技术变革[1]提供了比过去更多的自由选择机会[2]。因此，WEB平台的合理选择和发展对整个地区的非线性分析及其众多的应用程序具有越来越重要的意义。现阶段的WEB发展的特点是出现了大量的开源框架。框架将Web开发提到一个更高的水平，使基本功能的重复使用成为可能和从而提高了开发的生产力。 在某些情况下，开源框架没有提供常见问题的一个解决方案。出于这个原因，开发在开源框架的基础上建立自己的工程发展框架。本文旨在描述是一个基于Java的框架，该框架利用了开源框架并有助于开发基于Web的应用。通过分析现有的开源框架，本文提出了新的架构，基本环境及他们用来提高和利用其他一些框架的相关技术。架构定义了自己开发方法，其目的是协助客户开发和事例工程。 应用程序设计应该关注在工程中的重复利用。即使有独特的功能要求，也