IEEE COPYRIGHT AND CONSENT FORM
To ensure uniformity of treatment among all contributors, other forms may not be substituted for this form, nor may any wording of the form be changed. This form is intended for original material submitted to the IEEE and must accompany any such material in order to be published by the IEEE. Please read the form carefully and keep a copy for your files.
TITLE OF PAPER/ARTICLE/REPORT, INCLUDING ALL CONTENT IN ANY FORM, FORMAT, OR MEDIA (hereinafter, “the Work”): COMPLETE LIST OF AUTHORS: IEEE PUBLICATION TITLE (Journal, Magazine, Conference, Book):CNMT2010
Copyright Transfer
1. The undersigned hereby assigns to The Institute of Electrical and Electronics Engineers, Incorporated (the “IEEE”) all rights under copyright that may exist in and to: (a) the above Work, including any revised or expanded derivative works submitted to the IEEE by the undersigned based on the Work; and (b) any associated written or multimedia components or other enhancements accompanying the Work.
Consent and Release
2. In the event the undersigned makes a presentation based upon the Work at a conference hosted or sponsored in whole or in part by the IEEE, the undersigned, in consideration for his/her participation in the conference, hereby grants the IEEE the unlimited, worldwide, irrevocable permission to use, distribute, publish, license, exhibit, record, digitize, broadcast, reproduce and archive, in any format or medium, whether now known or hereafter developed: (a) his/her presentation and comments at the conference; (b) any written materials or multimedia files used in connection with his/her presentation; and (c) any recorded interviews of him/her (collectively, the “Presentation”). The permission granted includes the transcription and reproduction of the Presentation for inclusion in products sold or distributed by IEEE and live or recorded broadcast of the Presentation during or after the conference.
3. In connection with the permission granted in Section 2, the undersigned hereby grants IEEE the unlimited, worldwide, irrevocable right to use his/her name, picture, likeness, voice and biographical information as part of the advertisement, distribution and sale of products incorporating the Work or Presentation, and releases IEEE from any claim based on right of privacy or publicity.
4. The undersigned hereby warrants that the Work and Presentation (collectively, the “Materials”) are original and that he/she is the author of the Materials. To the extent the Materials incorporate text passages, figures, data or other material from the works of others, the undersigned has obtained any necessary permissions. Where necessary, the undersigned has obtained all third party permissions and consents to grant the license above and has provided copies of such permissions and consents to IEEE.
P lease check this box if you do not wish to have video/audio recordings made of your conference presentation.
See reverse side for Retained Rights/Terms and Conditions, and Author Responsibilities.
General Terms
? The undersigned represents that he/she has the power and authority to make and execute this assignment. ? The undersigned agrees to indemnify and hold harmless the IEEE from any damage or expense that may arise in the event of a breach of any of the warranties set forth above. ?
In the event the above work is not accepted and published by the IEEE or is withdrawn by the author(s) before acceptance by the IEEE, the foregoing copyright transfer shall become null and void and all materials embodying the Work submitted to the IEEE will be destroyed.
? For jointly authored Works, all joint authors should sign, or one of the authors should sign as authorized agent for the others.
(1)_____________________________________________________________ ___________________________________
Author/Authorized Agent for Joint Authors Date
U.S. Government Employee Certification (where applicable)
This will certify that all authors of the Work are U.S. government employees and prepared the Work on a subject within the scope of their official duties. As such, the Work is not subject to U.S. copyright protection.
(2)_____________________________________________________________ ___________________________________
Authorized Signature Date
(Authors who are U.S. government employees should also sign signature line (1) above to enable the IEEE to claim and protect its copyright in international jurisdictions.) Crown Copyright Certification (where applicable)
This will certify that all authors of the Work are employees of the British or British Commonwealth Government and prepared the Work in connection with their official )_____________________________________________________________ ___________________________________
h Commonwealth Government employees should also sign line (1) above to indicate their acceptance of all terms other than the
duties. As such, the Work is subject to Crown Copyright and is not assigned to the IEEE as set forth in the first sentence of the Copyright Transfer Section above. The undersigned acknowledges, however, that the IEEE has the right to publish, distribute and reprint the Work in all forms and media.
(3Authorized Signature Date
(Authors who are British or Britis copyright transfer.) rev. 032409
IEEE COPYRIGHT FORM (continued)
Wireless Streaming Media Forward Platform Based on Mixed QoS Control
Xianping Fu Yugang Men
1.
Authors/employers retain all proprie escribed in the Work. or derivative works
of the ent contract or grant, the IEEE recognizes that the U.S. Government has royalty-free items 2, 3, and 4, authors/employers must request permission from the IEEE Intellectual Property Rights office to requests for INFORMATION FOR AUTHORS
Author Responsibilities RETAINED RIGHTS/TERMS AND CONDITIONS
tary rights in any process, proce ure, or article of manufacture d d 2. Authors/employers may reproduce or authorize others to reproduce the Work, material extracted verbatim from the Work, for the author’s personal use or for company use, provided that the source and the IEEE copyright notice are indicated, the copies are not used in any way that implies IEEE endorsement of a product or service of any employer, and the copies themselves are not offered for sale.
3. Authors/employers may make limited distribution of all or portions of the Work prior to publication if they inform the IEEE in advance nature and extent of such limited distribution.
4. In the case of a Work performed under a U.S. Governm permission to reproduce all or portions of the Work, and to authorize others to do so, for official U.S. Government purposes only, if the contract/grant so requires.
5. For all uses not covered by reproduce or authorize the reproduction of the Work or material extracted verbatim from the Work, including figures and tables.
6.
Although authors are permitted to re-use all or portions of the Work in other works, this does not include granting third-party reprinting, republishing, or other types of re-use. The IEEE Intellectual Property Rights office must handle all such third-party requests.
chnical publications throughout the world and wants to ensure that the material submitted to its publications is properly The IEEE distributes its te available to the readership of those publications. Authors must ensure that their Work meets the requirements as stated in section 8.2.1 of the IEEE PSPB Operations Manual, including provisions covering originality, authorship, author responsibilities and author misconduct. More information on IEEE’s publishing policies may be found at https://www.doczj.com/doc/611994023.html,/web/publications/pubtoolsandpolicyinfo/index.html . Authors are advised especially of IEEE PSPB Operations Manual section 8.2.1.B12: "It is the responsibility of the authors, not the IEEE, to determine whether disclosure of their material requires the prior consent of other parties and, if so, to obtain it." Authors are also advised of IEEE PSPB Operations Manual section 8.1.1B: "Statements and opinions given in work published by the IEEE are the expression of the authors."
uthor/Employer Rights A
If you are employed and prepared the Work on a subject within the scope of your employment, the copyright in the Work belongs to your employer pyright Ownership as a work-for-hire. In that case, the IEEE assumes that when you sign this Form, you are authorized to do so by your employer and that your employer has consented to the transfer of copyright, to the representation and warranty of publication rights, and to all other terms and conditions of this Form. If such authorization and consent has not been given to you, an authorized representative of your employer should sign this Form as the Author. IEEE Co
EE to own the copyrights to all copyrightable material in its technical publications and to the individual contributions It is the formal policy of the IE contained therein, in order to protect the interests of the IEEE, its authors and their employers, and, at the same time, to facilitate the appropriate re-use of this material by others. The IEEE distributes its technical publications throughout the world and does so by various means such as hard copy, microfiche, microfilm, and electronic media. It also abstracts and may translate its publications, and articles contained therein, for inclusion in various compendiums, collective works, databases and similar publications. Reprint/Republication Policy
The IEEE requires that the consent of the first-named author and employer be sought as a condition to granting reprint or republication rights to THIS FORM MUST ACCOMPANY THE SUBMISSION OF THE AUTHOR’S MANUSCRIPT.
others or for permitting use of a Work for promotion or marketing purposes.
Questions about the submission of the form or manuscript must be sent to the publication’s editor.
Please direct all questions about IEEE copyright policy to:
IEEE Intellectual Property Rights Office, copyrights@https://www.doczj.com/doc/611994023.html, , +1-732-562-3966 (telephone)
IEEE标准格式 论文题目(使用格式:论文标题) 根据需要加的副标题 第一隶属关系者姓名(第一作者姓名) 第一行(作者隶属关系的):部、组织名称 第二行:组织名称、可接受的缩写 第三行:城市、国家 第二联系者姓名(第二作者姓名) 第一行(作者隶属关系的):部、组织名称 第二行:组织名称、可接受的缩写 第三行:城市、国家 摘要——这个电子文档就是一个“活”的模板。论文的各个组成部分(标题，文字，页眉等)已经被定义在格式表上，本文中将对部分内容进行介绍。在论文的标题、摘要中不要使用特殊字符、特殊符号或者数学符号。(摘要) 关键字——组成部分;格式;类型;样式;插入(关键字) 一、引言(标题1) 所有的稿件必须用英文书写。本文中的这些准则包括字体，间距及出版论文全文的相关信息的完整描述。请遵循这些准则，如果你有任何问题，请直接到会议出版服务(CPS)处询问负责你论文出版的编辑。联系电话:+1(714)821-8380，传 真:+1(714)761-1784。 此模板给准备论文电子版的作者提供了其所需的许多格式规范。所有标准论文组件从三分方面指定:(1)方便个人论文规范化;(2)自觉遵守便于目前或以后出版电子稿论文的需求;(3)会议论文集中使用统一的格式、页边距、列宽、行距和内置的
格式样式;该文章列举了格式样式的例子，例子在括号内用斜体字进行标注，请遵循例子的格式。请不要重置页边距。像多次方程、图形及表格类的论文组成部分，本文并没有给出规定，但给出了不同的图标文本类型。有必要时可更改这些格式，并制定需要遵循的适用标准。 二、论文格式及字体 无论何处用到Times字体时，都需要用Times Roman或Times New Roman字体。如果文字处理器没有这两种字体，请选择外观与Times字体相近的字体。应尽可能地避免使用位图字体，首选使用True-Type1或Open Type字体。对于数学公式等，请使用公式编辑器将其插入。 三、使用说明 A、选择一个模板(标题2) 首先，要确保选择一个与自己论文尺寸相符的合适的模板，且该模板应符合美国论文打印的论文纸的规格。如果用A4纸打印，请关闭此模板，下载名为 “CPS_A4_格式”的A4纸格式文件。 B、保持规范的完整性 该模板用于格式化论文的。论文中的页边距、列宽、行距和字体都是有要求的，请不要更改。你可能会注意到一些特殊的地方，例如，模板中标题的页边距的比例度要比习惯中的大。因为遵照了使论文成为会刊的一部分而不是单独一个文档的一些规定，这种比例量度及 其其他的要求都是针对性的。请不要修改现行的任何规定。 四、请在排版前完成论文 在开始排版你的论文之前，先写完论文并将其保存为一个独立的文档。在文本文档格式和排版之前，请单独保存文本和图表。为了使图像只得到一个结果，请不
ieee会议论文格式 【篇一：sci、ieee会议论文模板】 paper title* (use style: paper title) subtitle as needed (paper subtitle) authors name/s per 1st affiliation (author) line 1 (of affiliation): dept. name of organization line 2-name of organization, acronyms acceptable line 3-city, country line 4-e-mail address if desired authors name/s per 2nd affiliation (author) line 1 (of affiliation): dept. name of organization line 2-name of organization, acronyms acceptable line 3-city, country line 4-e-mail address if desired abstract—this electronic document is a “live” template and already defines the components of your paper [title, text, heads, etc.] in its style sheet. *critical: do not use symbols, special characters, or math in paper title or abstract. (abstract) keywords—component; formatting; style; styling; insert (key words) i. introduction (heading 1) “word 97this template, modified in ms word 2007 and saved as a -2003 document” for the pc, provides authors with most of the formatting specifications needed for preparing electronic versions of their papers. all standard paper components have been specified for three reasons: (1) ease of use when formatting individual papers, (2) automatic compliance to electronic requirements that facilitate the concurrent or later production of electronic products, and (3) conformity of style throughout a conference proceedings. margins, column widths, line spacing, and type styles are built-in; examples of the type styles are provided throughout this document and are identified in italic type, within parentheses, following the example. some components, such as multi-leveled equations, graphics, and tables are not prescribed, although the various table text styles are provided. the formatter will need to create these components, incorporating the applicable criteria that follow. ii. ease of use
STRONG MOTION DISTRIBUTION AND MICROTREMOR OBSERVATION FOLLOWING THE 21 MAY 2003 BOUMERDES, ALGERIA EARTHQUAKE A. Meslem1, F. Yamazaki1, Y. Maruyama1, D. Benouar2, N. Laouami3 1 Department of Urban Environment Systems, Graduate School of Engineering, Chiba University, Japan 2 Faculty of Civil Engineering, University of Bab-Ezzouar, Algiers, Algeria 3CGS, National Center of Applied Research in Earthquake Engineering, Algiers, Algeria Email: meslem@graduate.chiba-u.jp ABSTRACT: Detailed analysis was conducted for the recorded mainshock across the country during the 21 May 2003 Boumerdes, Algeria earthquake. A remarkable difference has been recorded between neighbour stations. Since local site conditions have a significant effect on the ground motions, and hence on the damage distribution caused by the earthquake, microtremor survey was conducted at several sites of seismic observation stations. In this study, a particular attention is paid to 4 seismic network stations located in the most affected area between Algiers and Boumerdes provinces. Using the microtremor records and the strong motion records from five stations, the effect of soil condition on seismic motion is investigated and the damage distribution caused by this event is explained. The results from this study show that in some stations, the recorded high PGA values were influenced by high-frequency contents. However, in other stations, soil amplification is considered to be responsible for high PGV v alues. Hence, in order to conduct a further engineering and seismological study, it is highly recommended to conduct an investigation to identify the local soil profile at the seismic stations. KEYWORDS: the 2003 Boumerdes earthquake, ground motion, microtremor, damage distribution 1. INTRODUCTION On May 21, 2003, a destructive Mw=6.8 earthquake hit the northern part of Algeria, causing a huge structural and non-structural damages and human casualties. The last report by the Algerian ministers’ council (December 12, 2003) deplores that 2,278 deaths and 11,450 injured were claimed by the earthquake. The number of homeless was counted as 250,000, corresponding to 40,000 families. As for the building damage, 17,000 units were demolished and 116,000 were repaired. The resulted direct economic loss was estimated to be 5 billion US dollars (Ousalem and Bechtoula, 2005). The earthquake was felt inside a 250 km radius zone from the epicenter (Laouami et al., 2006) and provoked the occurrence of liquefaction in the epicentral area. An uplift of coastal line was marked with the average of 0.55m (Harbi et al., 2007; Bouhadad et al., 2004; Meghraoui et al., 2004). In the European side of Mediterranean Sea, tsunamis of about 1.5m high were recorded along the coast of Spain (Alasset et al., 2006). Soon after the event, several international organizations located the 21 May 2003 Boumerdes earthquake. The location given by the Algerian Research Center of Astronomy Astrophysics and Geophysics (CRAAG) was 36.91N, 3.58E. However, the mainshock was relocated at 36.83N, 3.65E with the focal depth of 10 km (Bounif et al., 2004). The acceleration records of the mainshock were recorded by a number of accelerographs, deployed by the Algerian National Research Center of Earthquake Engineering (CGS). However, several technical problems have occurred during recording the mainshock. The number of free field seismic stations which recorded the mainshock, especially in the severely affected areas, is not sufficient for estimating a detailed strong motion
Paper Title Subtitle as needed Authors Name/s per 1st Affiliation (Author) line 1 (of Affiliation): dept. name of organization line 2: name of organization, acronyms acceptable line 3: City, Country line 4: e-mail: name@https://www.doczj.com/doc/611994023.html, Authors Name/s per 2nd Affiliation (Author) line 1 (of Affiliation): dept. name of organization line 2: name of organization, acronyms acceptable line 3: City, Country line 4: e-mail: name@https://www.doczj.com/doc/611994023.html, Abstract—This electronic document is a “live” template. The various components of your paper [title, text, heads, etc.] are already defined on the style sheet, as illustrated by the portions given in this document. DO NOT USE SPECIAL CHARACTERS, SYMBOLS, OR MATH IN YOUR TITLE OR ABSTRACT. (Abstract) Keywords-component; formatting; style; styling; insert (key words) I.I NTRODUCTION (H EADING 1) All manuscripts must be in English. These guidelines include complete descriptions of the fonts, spacing, and related information for producing your proceedings manuscripts. Please follow them and if you have any questions, direct them to the production editor in charge of your proceedings at Conference Publishing Services (CPS): Phone +1 (714) 821-8380 or Fax +1 (714) 761-1784. This template provides authors with most of the formatting specifications needed for preparing electronic versions of their papers. All standard paper components have been specified for three reasons: (1) ease of use when formatting individual papers, (2) automatic compliance to electronic requirements that facilitate the concurrent or later production of electronic products, and (3) conformity of style throughout a conference proceedings. Margins, column widths, line spacing, and type styles are built-in; examples of the type styles are provided throughout this document and are identified in italic type, within parentheses, following the example. PLEASE DO NOT RE-ADJUST THESE MARGINS. Some components, such as multi-leveled equations, graphics, and tables are not prescribed, although the various table text styles are provided. The formatter will need to create these components, incorporating the applicable criteria that follow. II.T YPE S TYLE AND F ONTS Wherever Times is specified, Times Roman or Times New Roman may be used. If neither is available on your word processor, please use the font closest in appearance to Times. Avoid using bit-mapped fonts if possible. True-Type 1 or Open Type fonts are preferred. Please embed symbol fonts, as well, for math, etc. III.E ASE OF U SE A.Selecting a Template (Heading 2) First, confirm that you have the correct template for your paper size. This template has been tailored for output on the US-letter paper size. If you are using A4-sized paper, please close this template and download the file for A4 paper format called ―CPS_A4_format‖. B.Maintaining the Integrity of the Specifications The template is used to format your paper and style the text. All margins, column widths, line spaces, and text fonts are prescribed; please do not alter them. You may note peculiarities. For example, the head margin in this template measures proportionately more than is customary. This measurement and others are deliberate, using specifications that anticipate your paper as one part of the entire proceedings, and not as an independent document. Please do not revise any of the current designations. IV.P REPARE Y OUR P APER B EFORE S TYLING Before you begin to format your paper, first write and save the content as a separate text file. Keep your text and graphic files separate until after the text has been formatted and styled. Do not use hard tabs, and limit use of hard returns to only one return at the end of a paragraph. Do not add any kind of pagination anywhere in the paper. Do not number text heads-the template will do that for you. Finally, complete content and organizational editing before formatting. Please take note of the following items when proofreading spelling and grammar: A.Abbreviations and Acronyms Define abbreviations and acronyms the first time they are used in the text, even after they have been defined in the abstract. Abbreviations such as IEEE, SI, MKS, CGS, sc, dc, and rms do not have to be defined. Do not use abbreviations in the title or heads unless they are unavoidable. Identify applicable sponsor/s here. (sponsors)
Paper Title (use style: paper title) Subtitle as needed (paper subtitle) Authors Name/s per 1st Affiliation (Author) line 1 (of Affiliation): dept. name of organization line 2: name of organization, acronyms acceptable line 3: City, Country line 4: e-mail address if desired Authors Name/s per 2nd Affiliation (Author) line 1 (of Affiliation): dept. name of organization line 2: name of organization, acronyms acceptable line 3: City, Country line 4: e-mail address if desired Abstract—This electronic docum ent is a “live” template. The various components of your paper [title, text, heads, etc.] are already defined on the style sheet, as illustrated by the portions given in this document. (Abstract) Keywords-component; formatting; style; styling; insert (key words) I.正文标题一 在引言部分，可以采用中文书写。 II.正文标题二 A.二级标题1 二级标题的正文部分。 B.二级标题2 二级标题的正文部分。. III.正文标题三 第三部分的导言。 A.二级标题 二级标题的正文 B.二级标题 二级标题的正文部分。 IV.结论标题 结论的正文部分。 致谢 说明论文获得的基金的资助，论文获得的相关帮助等信息。 R EFERENCES(参考文献必须用英语) 若参考文献有中文，请翻译为英语，并在最后注明(In Chinese) REFERENCE [1]Ming Wang, Qian Zhang, The constrction of E-business: a case study. Journal of Peiking University, Vol 243, pp.102-103, April 2003 (In Chinese). [2]G. Eason, B. Noble, and I. N. Sneddon, “On certain integrals of Lipschitz-Hankel type involving pro ducts of Bessel functions,” Phil. Trans. Roy. Soc. London, vol. A247, pp. 529–551, April 1955. (references) [3]J. Clerk Maxwell, A Treatise on Electricity and Magnetism, 3rd ed., vol. 2. Oxford: Clarendon, 1892, pp.68–7 3. [4]I. S. Jacobs and C. P. Bean, “Fine pa rticles, thin films and exchange anisotropy,” in Magnetism, vol. III, G. T. Rado and H. Suhl, Eds. New York: Academic, 1963, pp. 271–350. [5]K. Elissa, “Title of paper if known,” unpublished. [6]R. Nicole, “Title of paper with only first word capitalized,” J. Na me Stand. Abbrev., in press. [7]Y. Yorozu, M. Hirano, K. Oka, and Y. Tagawa, “Electron spectroscopy studies on magneto-optical media and plastic substr ate interface,” IEEE Transl. J. Magn. Japan, vol. 2, pp. 740–741, August 1987 [Digests 9th Annual Conf. Magnetics Japan, p. 301, 1982]. [8]M. Young, The Technical Writer's Handbook. Mill Valley, CA: University Science, 1989. Identify applicable sponsor/s here. (sponsors)
国际会议论文格式要求： Author Guidelines for 8.5 x 11-inch Proceedings Manuscripts Author(s) Name(s) Author Affiliation(s) E-mail Abstract The abstract is to be in fully-justified italicized text, at the top of the left-hand column as it is here, below the auth or information. Use the word “Abstract” as the title, in 12-point Times, boldface type, centered relative to the column, initially capitalized. The abstract is to be in 10-point, single-spaced type, and up to 150 words in length. Leave two blank lines after the abstract, then begin the main text. 1. Introduction All manuscripts must be in English. These guidelines include complete descriptions of the fonts, spacing, and related information for producing your proceedings manuscripts. Please follow them and if you have any questions, direct them to the production editor in charge of your proceedings at the IEEE Computer Society Press: Phone (714) 821-8380 or Fax (714) 761-1784. 2. Formatting your paper All printed material, including text, illustrations, and charts, must be kept within a print area of 6-1/2 inches (16.51 cm) wide by 8-7/8 inches (22.51 cm) high. Do not write or print anything outside the print area. All text must be in a two-column format. Columns are to be 3-1/16 inches (7.85 cm) wide, with a 3/8 inch (0.81 cm) space between them. Text must be fully justified. A format sheet with the margins and placement guides is available as both Word and PDF files as
CSO 2010投稿论文写作要求(IEEE CS格式) 0. 特别提示：请大家使用IEEE CS最新版的两栏格式模板进行排版格式处理，同时考虑将论文压缩在IEEE CS的5页之内，如超过5页，超出页数将会加收额外费用。下面是一些中国作者排版时应该注意的问题，请准备论文投稿时注意。 1. 标题(Title):标题又称题目，是以最恰当、最简明的词语反映论文中最重要的特定内容的逻辑组合。论文题目是一篇论文给出的涉及论文范围与水平的第一个重要信息。论文题目十分重要，必须用心斟酌选定，有人说：好的论文题目是好文章的一半。对论文题目的要求是：准确得体、简短精炼、外延和内涵恰如其分、醒目。 在CSO2010的会议论文中，请使用14点(14-point)粗体罗马字(Time New Roman, boldface type)，标题应居中显示，每个实词(包括名词、代词、动词、形容词和副词)的首字母应该大写，虚词(包括冠词、连词、介词等)，注意如果虚词是标题的首个单词，也应该大写，如“A Support Vector Machines Method for Classification Problem”，标题之后留一个10点字体的空行。 另外，根据以前会议审稿结果，一些标题中还有“Study on”或者“Research on”类似的词，应该全部去掉，审稿人认为那些是典型的中国式英语翻译，为了顺利帮助检索，英文的写作应该更符合英文的习惯。 注意：标题字体应该严格按照修改要求来做，不要擅自更改标题字体。特别长的标题宜分成2行或者3行，如果距离过宽，请修改段前距离(在word的“格式--段落”菜单中可以修改段前段后距离)，这样就可以缩小行距。尽量用“Times New Roman”,不要对这个字体进行压缩。此外，首页标题不要用下标，表示基金感谢放在Conclusion之后和“References”之前，设置“Acknowledgment”一节，对一些基金支持和别人提供的帮助等表示感谢。 2. 作者姓名和单位: 这一项属于论文署名问题。署名一是为了表明文责自负，二是记录作用的劳动成果，三是便于读者与作者的联系及文献检索（作者索引）。 在CSO2010的论文中，作者姓名应该放在论文标题下方，居中用11点字体显示，不要加粗体。论文有多个作者时，可以用分2或3列的方式来显示。作者单位和email地址应该在作者下方，使用10点罗马字。在作者信息下面保留2个10点字体的空行。对于中国作者，要使用“名+姓”的格式写作者的名字，否则的话在检索数据库里面出错。例如，有个叫张三的中国作者，如果他的署名是 Zhang San，因为检索机构是国外的，国外都是名前姓后的方式，检索到数据库中就是San Z.，名经常被缩写为一个字母。所以务请各位作者注意。 注意：作者的排列问题主要是多个作者出现的问题，大家可以按照下面几个原则来做： (a) 如果2个或多个作者属于同一个单位，那就按照一栏格式，每个作者用逗号隔开： Sanfeng Zhang, Sihai Li, Wuyi Wang Department of Computer Sciences, Beijing University, Beijing, 100110, China E-mail: sfzhang@https://www.doczj.com/doc/611994023.html, (b) 如果2个或多个作者属于分属不同单位，那就按照下面的格式，利用表格来分栏，表格线变虚线即可实现。 Sanfeng Zhang Liuxing Zhao Qiutian Qian Department of Computer Science, Beijing University, Beijing, 100110, China E-mail: sfzhang@https://www.doczj.com/doc/611994023.html, School of Computing, Tsinghua University Beijing, 100084, China E-mail: xzhao@https://www.doczj.com/doc/611994023.html, Faculty of Business, Harvard University, Washington, 003-24, USA E-mail: qtqian@https://www.doczj.com/doc/611994023.html,
1.第二届软件工程国际会议(WCSE 2010) https://www.doczj.com/doc/611994023.html,/conferences/WCSE/2010 2010年12月19-20 日, 武汉 2.第二届智能系统国际会议(GCIS 2010) https://www.doczj.com/doc/611994023.html,/conferences/GCIS/2010 2010年12月16-17 日, 武汉 GCIS & WCSE 2010 要成为一个全球论坛，为研究人员和工程师公布并讨论在智能系统和软件工程领域的新发现和新技术。GCIS & WCSE 2010论文集将由CPS发行，包括IEEE Xplore上的论文集，并提交至EI Compendex和ISTP同时检索。（GCIS & WCSE 2009 论文已经在EI上检索。）报名费400美元或2700元人民币包括出版一篇论文，午餐，晚餐和宴会。 具体议题包括如下，但不仅仅局限于： GCIS: 人工智能；机器学习；智能控制和自动化；计算智能；软计算；自然计算；仿生算法；模糊神经技术；遗传和进化算法；语义网络等。 WCSE：软件度量；软件工具和开发环境；软件策略和伦理；编程语言；因特网和信息系统开发；软件需求；软件体系结构和设计；软件构件和复用；软件测试和分析；人机交互；软件进程和工作流程；软件可靠性，安全性，隐私性和可靠性；逆向工程及维护; 程序理解和可视化等 武汉被喻为“白云黄鹤之乡”，也是中国最大的城市之一。武汉市及周边地区有很多景点和历史古迹，比如：黄鹤楼，东湖，沿江街一带和洪山广场周围有许多殖民风格的建筑。 重要日期： 论文投稿截止日期：2010年5月30日 审查通知：2010年9月1日 论文最后定稿和作者注册截止日期：2010年9月15日 会议除研究论文外，还鼓励公司和机构在会议展区内展览现代化的产品和设备。 请将您的疑问发送至邮箱GCIS2010@https://www.doczj.com/doc/611994023.html, (用于 GCIS 2010) 或者WCSE2010@https://www.doczj.com/doc/611994023.html, (用于 WCSE 2010). 第二届软件工程国际会议(WCSE 2010) https://www.doczj.com/doc/611994023.html,/conferences/WCSE/2010 2010年12月19-20 日, 武汉 第二届智能系统国际会议(GCIS 2010) https://www.doczj.com/doc/611994023.html,/conferences/GCIS/2010 2010年12月16-17 日, 武汉 GCIS & WCSE 2010 论文集将由CPS 出版并送Ei Compendex、ISTP同时检索(GCIS & WCSE 2009 论文已经全部Ei Compendex检索). 投稿截止日为5月30日，欢迎您投稿并转发此会议通知。 2010 Second World Congress on Software Engineering (WCSE 2010)