QE=品质工程师（Quality Engineer）
MSA: Measurement System Analysis 量测系统分析
LCL: Lower Control limit 管制下限
Control plan 管制计划
Correction 纠正
Cost down 降低成本
CS: customer Sevice 客户中心
Data 数据
Data Collection 数据收集
Description 描述
Device 装置
Digital 数字
Do 执行
DOE: Design of Experiments 实验设计
Environmental 环境
Equipment 设备
FMEA: Failure Mode and Effect analysis 失效模式与效果分析
FA: Failure Analysis 坏品分析
FQA: Final Quality Assurance 最终品质保证
FQC: Final Quality control 最终品质控制
Gauge system 量测系统
Grade 等级
Inductance 电感
Improvement 改善
Inspection 检验
IPQC: In Process Quality Control 制程品质控制
IQC: Incoming Quality Control 来料品质控制
ISO: International Organization for Standardization 国际标准组织LQC: Line Quality Control 生产线品质控制
LSL: Lower Size Limit 规格下限
Materials 物料
Measurement 量测
Occurrence 发生率
Operation Instruction 作业指导书
Organization 组织
Parameter 参数
Parts 零件
Pulse 脉冲
Policy 方针
Procedure 流程
Process 过程
Product 产品
Production 生产
Program 方案
Projects 项目
QA: Quality Assurance 品质保证
QC: Quality Control 品质控制
QE: Quality Engineering 品质工程
QFD: Quality Function Design 品质机能展开
Quality 质量
Quality manual 品质手册
Quality policy 品质政策
Range 全距
Record 记录
Reflow 回流
Reject 拒收
Repair 返修
Repeatability 再现性
Reproducibility 再生性
Requirement 要求
Residual 误差
Response 响应
Responsibilities 职责
Review 评审
Rework 返工
Rolled yield 直通率
sample 抽样,样本
Scrap 报废
SOP: Standard Operation Procedure 标准作业书
SPC: Statistical Process Control 统计制程管制Specification 规格
SQA: Source(Supplier) Quality Assurance 供应商品质保证Taguchi-method 田口方法
TQC: Total Quality Control 全面品质控制
TQM: Total Quality Management 全面品质管理
Traceability 追溯
UCL: Upper Control Limit 管制上限
USL: Upper Size Limit 规格上限
Validation 确认
Variable 计量值
Verification 验证
Version 版本
QCC Quality Control Circle 品质圈/QC小组
PDCA Plan Do Check Action 计划执行检查总结Consumer electronics 消费性电子产品
Communication 通讯类产品
Core value （核心价值）
Love 爱心
Confidence 信心
Decision 决心
Corporate culture (公司文化)
Integration 融合
Responsibility 责任
Progress 进步
QC quality control 品质管理人员
FQC final quality control 终点品质管制人员
IPQC in process quality control 制程中的品质管制人员
OQC output quality control 最终出货品质管制人员
IQC incoming quality control 进料品质管制人员
TQC total quality control 全面质量管理
POC passage quality control 段检人员
QA quality assurance 质量保证人员
OQA output quality assurance 出货质量保证人员
QE quality engineering 品质工程人员
FAI first article inspection 新品首件检查
FAA first article assurance 首件确认
CP capability index 能力指数
SSQA standardized supplier quality audit 合格供应商品质评估
FMEA failure model effectiveness analysis 失效模式分析
AQL Acceptable Quality Level 运作类允收品质水准
S/S Sample size 抽样检验样本大小
ACC Accept 允收
REE Reject 拒收
CR Critical 极严重的
MAJ Major 主要的
MIN Minor 轻微的
Q/R/S Quality/Reliability/Service 品质/可靠度/服务
P/N Part Number 料号
L/N Lot Number 批号
AOD Accept On Deviation 特采
UAI Use As It 特采
FPIR First Piece Inspection Report 首件检查报告
PPM Percent Per Million 百万分之一
SPC Statistical Process Control 统计制程管制
SQC Statistical Quality Control 统计品质管制
GRR Gauge Reproducibility & Repeatability 量具之再制性及重测性判断量可靠与否
DIM Dimension 尺寸
DIA Diameter 直径
QIT Quality Improvement Team 品质改善小组
ZD Zero Defect 零缺点
QI Quality Improvement 品质改善
QP Quality Policy 目标方针
TQM Total Quality Management 全面品质管理
RMA Return Material Audit 退料认可
7QCTools 7 Quality Control Tools 品管七大手法
通用之件类
ECN Engineering Change Notice 工程变更通知(供应商)
ECO Engineering Change Order 工程改动要求(客户)
PCN Process Change Notice 工序改动通知
PMP Product Management Plan 生产管制计划
SIP Standard Inspection Procedure 制程检验标准程序
SOP Standard Operation Procedure 制造作业规范
IS Inspection Specification 成品检验规范
BOM Bill Of Material 物料清单
PS Package Specification 包装规范
SPEC Specification 规格
DWG Drawing 图面
系统文件类
ES Engineering Standard 工程标准
IWS International Workman Standard 工艺标准
ISO International Standardization Organization 国际标准化组织GS General Specification 一般规格
部类
PMC Production & Material Control 生产和物料控制
PCC Product control center 生产管制中心
PPC Production Plan Control 生产计划控制
MC Material Control 物料控制
DCC Document Control Center 资料控制中心
QE Quality Engineering 品质工程(部)
QA Quality Assurance 品质保证处
QC Quality Control 品质管制(课)
PD Product Department 生产部
LAB Laboratory 实验室
IE Industrial Engineering 工业工程
R&D Research & Design 设计开发部
1.Sales Agreement The agreement, (is) made in Beijing this eighth day of August 1993 by ABC Trading Co., Ltd., a Chinese Corporation having its registered office at Beijing, the People’ Repubic of China (hereinafter called “Seller”) and International Tradi ng Co., Ltd., a New York Corporation having its registered office at New York, N.Y., U.S.A. (hereinafter called “Buyer”). 2.WITNESSETH WHEREAS, Seller is engaged in dealing of (product) and desires to sell (product)to Buyer, and WHEREAS, Buyer desires to purchase(product) from Sellers, Now, THEREFORE, it is agreed as follows: 3.Export Contract This Contract is entered into this 5th day of August 1993 between ABC and Trading Co., Ltd. (hereinafter called “Seller”) who agrees to sell, and XYZ Trading Co., Ltd. (hereinafter called “Buyer”) who agrees to buy the following goods on the following terms and condition. 4.Non-Governmental Trading Agreement No. ＿＿This Agreement was made on the＿day of＿19＿, BETWEEN ＿ (hereinafter referred to as the Seller) as the one Side and ＿ (hereinafter referred to as the Buyer) as the one other Side. WHEREAS, the Seller has agreed to sell and the buyer has agreed to buy ＿ (hereinafter referred to as the Goods ) the quantity, specification, and price of which are provided in Schedule A. IT IS HEREBY AGREED AS FOLLOWS: 5.Contract For Joint-Operation Enterprise ＿＿ COMPANY LTD., a company duly organized under the Law of ＿＿ and having its registered office at (hereinafter called “Party A”) AND ＿＿ COMPANY LTD., a company duly organized under the Law of ＿＿ and having its registere d office at (hereinafter called “Party B”) Party A and Party B (hereinafter referred to as the “Parties”) agree to jointly form a Co-operation Venture Company (hereinafter referred to as the “CVC”) in accordance with “the Laws of the People’s Republic of C hina on Joint Ventures Using Chinese and Foreign Investment” and the “Regulations for the Implementation of the Laws of the People’s Republic of China on Joint Ventures Using Chinese and Foreign Investment” and other applicable laws and regulations. 6.MODEL CONTRACT Contract No. Date: Seller: Signed at: Address: Cable Address: Buyer: Address: Cable Address: The Seller and the Buyer have agreed to conclude the following transactions according to the terms and conditions stipulated below: https://www.doczj.com/doc/9417421843.html, of Commodity: 2.Specifications: 3.Quantity: 4.Unit Price: 5.Total Price: U.S.$: 6.Packing: 7.Time of Shipment: days after receipt of L/C. 8.Loading Port & Destination Port: From via to . 9.Insurance:
印刷中英文术语对照 Woodfree paper 書紙 Matt paper 啞粉紙 Glossy paper 光粉紙 1.GSM与LBS( pound)的转换： English paper grade to grammage conversion Grammage Paper Grade (LBS.) 44 gsm 30 lb. text 59 gsm 16 lb. bond, 40 lb. text 67 gsm 45 lb. text 89 gsm 24 lb. bond, 60 lb. text 104 gsm 70 lb. text 118 gsm 80 lb. text 148 gsm 67 lb. bristol, 100 lb. text 162 gsm 60 lb. cover 163 gsm 90 lb. index 176 gsm 65 lb. cover 178 gsm 80 lb. bristol 199 gsm 110 lb. index 216 gsm 80 lb. cover 219 gsm 100 lb. bristol 253 gsm 140 lb. index 263 gsm 120 lb. bristol
270 gsm 100 lb. cover 307 gsm 140 lb. bristol 308 gsm 170 lb. index 325 gsm 120 lb. cover 2.印刷品中英文对照 日历：calendar 台历：desk calendar 挂历：wall calendar 精装书: Case bound, hard bound, cloth bound, hardback, hardcover book 小册子:brochure 纸相架:Paper frame 纸板书: Board book 纸匣: paper tray 螺旋簿: spiral book 合订本：bound book 书芯纸印的封面。小册子的所有纸张（包括封面）采用同一类或相同克重的纸张，称为简装本（self-cover brochure）。 翻页书: flipbook 3.纸张中英文对照 铜版纸,又称涂布印刷纸:Coated Art Paper(or Board), Coated Woodfree; Art paper;Art printing pape;Copper printing paper 双铜纸: both sides coated art paper 亚粉纸: dull finished art paper,matt art paper
编号：_______________本资料为word版本，可以直接编辑和打印，感谢您的下载 英文合同格式 甲方：___________________ 乙方：___________________ 日期：___________________
NO.11 ZHONGSHAN STREET XIAMEN FUJIAN CHINA SALES CONFIRMATION ［打印预览］［保存］［诅出］ 销货合同（Sales Confirmation） 国际货物买卖合同一般金额大，内容繁杂，有效期长，因此许多国家的法律要求采用书面形式。书面合同主要有两种形 式，即正式合同（CONTRACT ）和合同确认书（CONFIRMATION ）,虽然其繁简不同，但具有同等法律效力，对买卖双方均有约束力。大宗商品或成交额较大的交易，多采用正式合同；而金额不大，批数较多的小土特产品或轻工产品，或者已订立代理、包销等长期协议的交易
多采用合同确认书（亦称简式合同）。 无论采哪种形式，合同抬头应醒目注明SALES CONTRACT 或SALES CONFIRMATION （对销售合同或确认书而言） 等字样。一般来说出口合同的格式都是由我方（出口公司）事先印制好的，因此有时在SALES CONFIRMATION 之前加上 出口公司名称或是公司的标志等（我外贸公司进口时也习惯由我方印制进口合同）。交易成立后，寄交买方签署 （countersign ）,作为交易成立的书面凭据。 在SimTrade 中，买卖双方都可以起草合同，填写时只需将名称、地址等内容作相应变化既可。如合同由买方起草时，上方空白栏则填入进口商公司名称及地址，以此类推。 报表上方两行空白栏 为出口商公司抬头，须分别填写出口商的英文名称及地址。 如:GRAND WESTERN FOODS CORP. Room2501, Jiafa Mansion, Beijing West road, Nanjing 210005, P. R. China Messrs 详细填列交易对象（即进口商）的名称及地址。 在SimTrade 中，进口商的详细资料请在淘金网”的公司库里查询。 如：Dynasty Furniture Manufacturing Ltd. 3344-54th Avenue S. E. Calgary, Alberta T2C OAS Canada No. 销货合同编号，由卖方自行编设，以便存储归档管理之用。 在SimTrade 中，该编号已由卖方在起草合同时填入，单据中不能再更改。 Date 填写销货合同制作日期。 如：2005年2月18日，可以有以下几种日期格式填法： 1.2005-02-18 或02-18-2005 2. 2005/02/18 或02/18/2005 3. 050218 （信用证电文上的日期格式） 4. February 18, 2005 或Feb 18, 2005 Product No. 填写货号，销货合同上应记明各种货物编号，以求联系沟通方便。 在SimTrade 中，货号必须选择淘金网”的产品展示”里已有的商品编号。 Description 品名条款。此栏应详细填明各项商品的英文名称及规格，这是买卖双方进行交易的物质基础和前提。对商品的具体描述说明是合同的主要条款之一，如果卖方交付的货物不符合合同规定的品名或说明，买方有权拒收货物、撤销合同并提出损害赔偿。 在SimTrade 中，商品的详细资料请在淘金网’产品展示”里查找，此栏目填写必须与淘金网的商品详细资料里商品英 文名称及英文描述完全一致。 例1 :产品01005 的商品描述: CANNED SWEET CORN 3060Gx6TINS/CTN 例2:产品04001 的商品描述：WOODEN TEA SERVICE
品质管理 (be) qualfied, up to grade 合格 模具正式投産前確認 3B 5M Man/Machine/Material/Method/Measurement 人力/ 機器/ 材料/ 方法/ 量測 5S整理/ 整頓/ 清掃/ 清潔/ 教養 5WIH When/Where/Who/What/Why/How to 何時/ 何地/ 誰/ 何事/ 為什麼/ 怎麼做7QCTools7 Quality Controls Tools 品管七大手法 8 disciplines 8項回復內容 abnormal handling 異常處理 ACC Accept 允收 acceptance = receive 驗收 ADM Absolute Dimension Measurement全尺寸測量 AIR Artical Inspection report AOD Accept On Deviation 特采 AOQ Average Output Quality平均出廠品質 AOQL Average Output Quality Level 平均出廠品質水準 APP Approve 核准,認可,承認 AQL Acceptable Quality Level 允收品質水準 AR Averary Range全距平均值
Bending 軟體導入 C=0 Critical=0 極嚴重不允許 CAR Corrective action request 改正行動要求改正報告 CP capability index 製造能力指數 CPK capability index of process 模具制程能力參數 CR Critical 極嚴重的 defective product/non-good parts 不良品 defective products 不良品 DFR Defect Failure Rate NG Not Good 不良,不合格 No.Number 數(號) OOBA out of box audit 開箱檢查 OQA output quality assurance 出貨品質保證 OQC output quality control 最終出貨品管 ORT On going Reliability Qualit P/O Waive Purchase Order Waive Packing 包裝 PDCA Plan/ Do /Check /Action 計劃/ 執行/ 檢查/ 總結POC passage quality control 段檢人員
英文销售合同_中英文对照销售合同范本英文销售合同_中英文对照销售合同范本(一) SALES CONTRACT 合同编号： Contract NO: 签订地点： Signed at: 签订日期： Date: 买方： The Buyers： 卖方： The Sellers： 双方同意按下列条款由买方售出下列商品：
The Buyers agree to buy and the Sellers agree to sell the following goods on terms and conditions as set forth below： (1)商品名称、规格及包装 (1)Name of Commodity ,Specifications and Packing (2)数量 (2)Quantity (3)单价 (3)Unit Price (4)总值 (4)Total Value (装运数量允许有 %的增减) (Shipment Quantity %more or less allowed) (5)装运期限：
(5)Time of Shipment： (6)装运口岸： (6)Port of loading： (7)目的口岸： (7)Port of Destination： (8)保险;由方负责，按本合同总值110%投保_____险。 (8)Insurance：To be covered by the___for 110% of the invoice value against_______. (9)付款：凭保兑的、不可撤销的、可转让的、可分割的即期有电报套汇条款/见票/出票____天期付款信用证，信用证以_____为受益人并允许分批装运和转船。该信用证必须在______前开到卖方，信用证的有效期应为上述装船期后第15天，在中国______到期，否则卖方有权取消本售货合约，不另行通知，并保留因此而发生的一切损失的索赔权。
销售合同 SALES CONTRACT 编号：Contract No: 日期: Date: 签约地点：Signed at: 卖方：Sellers: 地址：Address: 邮政编码：Postal Code: 电话：Tel:传真：Fax: 买方：Buyers: 地址：Address: 邮政编码：Postal Code: 电话：Tel:传真：Fax: 兹确认售予买方下列货品，其成交条款如下： The Seller hereby confirms selling the following goods on terms and conditions (3)公差：数量及总值均有_____%的增减,由卖方决定 Tolerance: With _____% more or less both in amount and quantity allowed at the sellers option. (4) 原产地
Country of Origin: (5) 付款方式：30%预付，70%发货前一周付清 Payment terms: 30% deposit, 70% payment within one week before delivery. (6) 交货时间：收到预付款后15天内完成装运。 Time of shipment: Within15 days after deposit received. (7) 贸易方式：FOB Shanghai Terms of Shipment: FOB Shanghai (8) 包装：胶合板木盘外封铁皮 Packing：Plywood drum with steel sheet cover. (9) 保险：由卖方按发票全额110%投保至_____为止的_____险。 Insurance：To be effected by seller for 110% of full invoice value covering _____ up to _____ only. (10) 装运口岸：中国上海港 Port of Loading: Shanghai Port, China (11) 转运：允许 Transshipment: Allowed (12) 分批装运：允许分批装运 Partial Shipment: Allowed (13) 目的口岸： Port of Destination: (14) 唛头：Shipping Marks： (15) 单据：Documents： (16) 品质与数量、重量的异义与索赔：Quality/Quantity Discrepancy and Claim： (17) 逾期发运：如果由于买方原因造成逾期发运，买方承担责任。造成自签订合同之日起超过45天不能发运的，卖方将每日按货物金额的3%收取保管费；如果由于买方原因造成逾期发运超过6个月，卖方有权自行处置定金和货物。如果是卖方原因造成的逾期
工程施工合同 Contract 合同编号( Contract NO. )： 签订日期( Date )： 发包方（简称甲方） Party A: 承包方（简称乙方）： Party B: 根据《中华人民共和国合同法》以及其他有关法律法规规定的原则，结合本工程的具体情况，甲、乙双方在平等、自愿、协商一致的基础上达成如下协议，共同遵守。 According to “P.R.C Contract Law”,and other relevant laws and regulations to the specific circumstances of this project, parties A and B have hereby equally and voluntarily entered into the following agreement executed on the basis of mutual respect. 1.工程概况 Project overview 1.1工程名称： Project name: 1.2工程地点： Project location: 1.3工程范围： A. 新研发中心和新厂房的网络综合布线系统的施工； B. 数据中心的建设，主要包含：数据中心的装饰工程、电气系统、空调系统、机房闭路监控系统、机房门禁系统、消防系统改造、机柜系统等。 Project contents: A. The new R & D and new plant construction of network cabling systems; B. Data Center, mainly includes: data center decoration and electrical systems, air-conditioning systems, CCTV systems, access control systems, firefighting system reform, server rack systems. 1.4开工条件：合同生效后，甲方预付款到位和现场具备开工条件。 Start conditions: After the commencement of the contract, Party A has started advance and on-site conditions in place.
合同编号：YT-FS-8920-88 英文版合同范本 Clarify Each Clause Under The Cooperation Framework, And Formulate It According To The Agreement Reached By The Parties Through Consensus, Which Is Legally Binding On The Parties. 互惠互利共同繁荣 Mutual Benefit And Common Prosperity
英文版合同范本 备注：该合同书文本主要阐明合作框架下每个条款，并根据当事人一致协商达成协议，同时也明确各方的权利和义务，对当事人具有法律约束力而制定。文档可根据实际情况进行修改和使用。 contract no: date: the buyer: the seller: the contract, made out, in chinese and english, both version being equally authentic, by and between the seller and the buyer whereby the seller agrees to sell and the buyer agrees to buy the undermentioned goods subject to terms and conditions set forth hereinafter as follows: 1 name of commodity and specification 2 country of origin & manufacturer 3 unit price (packing charges included)
国际贸易合同协议书样本中英文对照 文件编号TT-00-PPS-GGB-USP-UYY-0089
CONTRACT NO.: DATE: THE BUYERS: ADDRESS : TEL: FAX: THE SELLERS: ADDRESS: TEL: FAX: This Contract is made by and between the Buyers and the Sellers, whereby the Buyers agree to buy and the Sellers agree to sell the under mentioned commodity according to the terms and conditions stipulated below: 买方与卖方就以下条款达成协议： 1. COMMODITY: 2. COUNTRY AND MANUFACTURERS: 原产国及造商： 3. PACKING: To be packed in standard airway packing. The Sellers shall be liable for any damage of the commodity and expenses incurred on account of improper packing and for any rust attributable to inadequate or improper protective measures taken by the sellers in regard to the
印刷专业用语 纸料： 260g粉灰260g grey back MC board 300g粉灰300g grey back MC board 350g粉灰350g grey back MC board 350g单粉咭(白芯/灰芯)350g single side coated board (white liner/grey liner) 350g双粉咭(白芯/灰芯)350g both sides coated board (white liner/grey liner) 80g书纸80g W/F PAPER 80g色书纸80g color W/FPAPER 157g双粉纸157g art paper 157g哑粉纸157g matt coated paper 防潮纸Moisture Proof paper 铜板不干胶Raflacoat self-adhesive 双铜纸glossy paper/ coated art paper 双胶纸offset paper 轻涂纸Light Weight Coated Paper 无光铜版纸matt art paper 光面铜版纸gloss paper 灰底白板卡纸CCNB的全称是Clay Coated News Back 牛底白板纸板CCKB(Clay Coated Kraft Back) 白底灰芯纸板CCWB(Clay Coated White Back)
铜板卡纸/白芯粉咭SBS(Solid Bleached Sulphate) 合成纸Synthetic paper 根据表面涂布情况SBS又分为单粉咭C1S(coated one side)和双粉咭 C2S(coated two sides)。根据表面涂布效果分为Matte(哑光纸)和Glossy(光面纸)。 坑纸: BEE-flute (125g牛咭+110g芯纸) WE-flute (140g白牛咭+110g芯纸) B3-flute (125g牛咭+115g芯纸) A3-flute (175g牛咭+115g芯纸) K3-flute (250g牛咭+115g芯纸) W3-flute (140g白牛咭+115g芯纸) A3B9-flute (175g牛咭+115g芯纸+125g牛咭+110g芯纸)K3B9-flute (250g牛咭+115g芯纸+125g牛咭+110g芯纸)印刷 印油Transparent ink 印光油Gloss Varnishing 印哑油Matt Varnishing 印专色Printed in spot color 表面处理 磨光Calendaring 磨光吸塑油Blister-calendaring varnish 过光油Varnishing
中英文合同范本 建筑合同architecture confirmation 甲方：party a：乙方：party b： 合同编号： contract no 日期：date： 签约地点：signed at： 特约定： 甲方基于下文所列各种因素，特与乙方达成了协议并一致同意：由甲方在 订约日期之翌日起_____天之内为乙方建造并完成_____（涉约建筑）。涉约建 筑之规模及所需的钢筋、水泥、砖块、石子和其它建筑材料之数量，均在作为 合同附件的设计图和施工细则中予以说明。 witnesses that the party a for considerations hereinafter named, contracts and agrees with the party b that party a will, within_____ days, next following the date hereof, build and finish a libarary building for party b. （ the building hereinafter is referred to as the said building.） the said building is of the following dimensions, with reinforced concrete, brick, stones and other materials, as are described in plans and specifications gereto annexed. 基于上述情况，乙方及其法定代表郑重承诺向甲方支付人民币_____元整。支付方法商定如下： in consideration of the foregoing, party b shall, for itself and its legal representatives, promise to pay party a the sum of one
缩写英文对照中文术语 8D 8 Disciplines Of Solving Problem 解决问题8步法 AC./RE. Acceptable / Rejective 允收/拒收 AQL Acceptable Quallity Level 允收水准 ABB Activity-Based Budgeting 实施作业制预算制度 ABC Activity-Based Costing 作业制成本制度 ABM Activity-Based Mangement 作业制成本管理 APS Advanced Planning And Scheduling 应用程式服务供应商APQP Advanced Product Quality Planning 先期产品品质规划ANOVA Analysis Of Variance 方差分析 AAR Appearance Approval Report 外观承认报告 AC Appraisal Cost 鉴定成本 ASL Approved Suplier List 合格供应商清单 AVL Approved Vendor List 认可的供应商清单 ATP Available To Promise 可承诺量 BSC Balanced Score Card 平衡记分卡
BOM Bill Of Material 材料明细 BTF Build To Forecarst 计划生产 BTO Build To Order 订单生产 BPR Business Process Reengineering 企业流程再造 CPK Capability Of Process 修正过程能力指数 Ca. Capability Of Accuraty 精确度指数 Cp. Capability Of Precesion 精密度指数 CRP Capacity Requirement Planning 产能需求规划 C. OF C. Certificate Of Compliance （质量）承诺证明书CEO Chief Excutive Officer 执行总裁 CQC Companywide Quality Control 全公司范围的品质管理CPM Complaint Per Illion 每百万报怨次 CAD Computer Aided Design 计算机辅助设计 CTO Configuration To Order 客制化生产 CRC Contract Review Committee 合同评审委员会 CIF Cost Inusance And Freight 到岸价格
YOUR LOGO 英文购销合同_中英文对照购销 合同范本(2021版) When concluding a contract, the parties of the contract purpose should be determined. The conclusion and performance of contracts are also human behavior.
专业合同系列，下载即可用 英文购销合同_中英文对照购销合同 范本(2021版) 导语：合同目的具有确定性。一般情况下，在订立合同时，当事人的合同目的应该是确定的。从严格意义而言，任何人的行为都是有目的的。合同的订立和履行也属于人的行为，而且是比较正式的行为，所以更应该具有一定的具体目的。因此，对于特定的合同当事人，其合同目的是确定的。 英文购销合同_中英文对照购销合同范本(一) Buyer: 买方： Add.: 地址： Seller: 卖方： Add.: 地址： This purchase contract (hereafter abbreviated “contract”) is signed by and between the Buyer and the Seller upon equal negotiations based on the Contract Law of P..R .China and other relevant laws and regulations.. Both parties agree to sell and buy goods on following terms and conditions. 此销售合同(以下简称“合同”)根据 >及相关法律法规并经由买卖双方经平等协商后共同签定，买方与卖方均同意以下条款和条件购买和出售货物。 1. COMMODITY NAME品名：Work glves 劳保手套
Serial No.: Employment Contract Party A: Legal Representative: Registered Post Code: Telephone No.: Party B:Gender: ID No.: Home Address: Mailing Address and Post Code: Domicile: Street（Town）District（County）Province（Municipality）Telephone: In accordance with the Labor Law of the People’s Republic of China, the Law of the People’s Republic of China on Employment Contract, and othe r relevant laws and regulations, on the basis of equality and of their own accord, and through consultations, Party A and Party B have reached consensus and signed this Contract and shall collaboratively abide by the conditions prescribed in this Contract. Chapter I Term of the Employment Contract Article 1 This Contract is a fixed term employment contract. This Contract enters into effect on date month year among which the probation period ends on date month year . And this Contract shall expire on date month year . Chapter II Job Description and the Place of Work Article 2According to the stipulations of the Labor Service Contract on the Employment of Chinese Citizens /or Agreement /or MOU signed between Party A and (the employing work unit, hereinafter referred to as “the
房屋租赁合同LEASE CONTRACT-中英文对照 发布时间：2010-12-19 11:18:55 http: 本合同双方当事人 出租方（甲方）： 承租方（乙方）： 根据国家有关法律、法规和本市有关规定，甲、乙双方在平等自愿的基础上，经友好协商一致，就甲方将其合法拥有的房屋出租给乙方使用，乙方承租使用甲方房屋事宜，订立本合同。 一、建物地址 甲方将其所有的位于上海市区的房屋及其附属设施在良好状态下出租给乙方使用。 LEASE CONTRACT Lessor （hereinafter referred to as Party A）： Lessee （hereinafter referred to as Party B）： Party A and B have reached an agreement through friendly consultation to conclude thefollowing contract. 1.Location of the premises Party A will lease to Party B the premises and attached facilities owned by itself which is located at and in good condition for .
二、房屋面积 出租房屋的登记面积为平方米（建筑面积）。 三、租赁期限 租赁期限自____年__月__日起至____年__月__日止，为期年，甲方应于年月日将房屋腾空并交付乙方使用。 2.Size of the premises The registered size of the leased premises is __squaremeters （Gross size）。 3.Lease term The lease termwill be from（month）（day）（year） to_（month）___（day）___（year）。Party A will clear the premises and provide it to Party B for use before ___（month） ___（day）___（year）。 四、租金 1.数额： 双方商定租金为每月___元整（含管理费）。乙方以___形式支付给甲方. 2.租金按___月为壹期支付；第一期租金于___年___月___日以前付清；以后每期租金于每月的___日以前缴纳，先付后住（若乙方以汇款形式支付租金，则以汇出日为支付日，汇费由汇出方承担）；甲方收到租金后予书面签收。 3.如乙方逾期支付租金超过七天，则每天以月租金的 0.3％支付滞纳金；如乙方逾期支付租金超过十天，则视为乙方自动退租，构成违约，甲方有权收回房屋，并追究乙方违约责任。 4.Rental
1.Sales Agreement The agreement, (is) made in Beijing this eighth day of August 1993 by ABC Trading Co., Ltd., a Chinese Corporation having its registered office at Beijing, the People’ Repubic of China (hereinafter called “Seller”) and International Trading Co., Ltd., a New York Corporation having its registered office at New York, N.Y., U.S.A. (hereinafter called “Buyer”). 2.WITNESSETH WHEREAS, Seller is engaged in dealing of (product) and desires to sell (product)to Buyer, and WHEREAS, Buyer desires to purchase(product) from Sellers, Now, THEREFORE, it is agreed as follows: 3.Export Contract th This Contract is entered into this 5 day of August 1993 between ABC and Trading Co., Ltd. (hereinafter called “Seller”) who agrees to sell, and XYZ Trading Co., Ltd. (hereinafter called “Buyer”) who agrees to buy the following goods on the following terms and condition. 4.Non-Governmental Trading Agreement No. ＿＿ This Agreement was made on the＿day of＿ 19＿, BETWEEN ＿(hereinafter referred to as the Seller) as the one Side and ＿ (hereinafter referred to as the Buyer) as the one other Side. WHEREAS, the