当前位置:文档之家› 机电工程专业英语教案

机电工程专业英语教案

机电工程专业英语教案
机电工程专业英语教案

教案

教案

教案

教案

教案

教案

教案

教案

教案

教案

教案

教案

教案

教案

教案

教案

电气工程及其自动化专业英语(1)重点

电气工程及其自动化专业英语 考试题型:选择10*2 单词翻译10*2 短句翻译5*4 长句翻译4*10 Exercise All the simple circuit elements that will be 在下面进行的工作中我们要研究的简单电路元件,可以根据流过元件的电流与元件两端的电压的关系进行分类。例如,如果元件两端的电压正比于流过元件的电流,即u=ki,我们就把元件称为电阻器。其他的类型的简单电路元件的端电压正比于电流对时间的导数或正比于电流关于时间的积分。还有一些元件的电压完全独立于电流或电流完全独立于电压,这些是独立源。此外,我们还要定义一些特殊类型的电源,这些电源的电压或电流取决于电路中其他的电流或电压,这样的电源将被称为非独立源或受控源。 It must be emphasized that the linear 必须强调的是线性电阻器是一个理想的电路元件;它是物理元件的数学模型。我们可以很容易地买到或制造电阻器,但很快我们发现这种物理元件只有当电流、电压或者功率处于特定范围时其电压——电流之比才是恒定的,并且这个比值也取决于温度以及其它环境因素。我们通常应当把线性电阻器仅仅称为电阻器。只有当需要强调元件性质的时候才使用更长的形式称呼它。而对于任何非线性电阻器我们应当始终这么称呼它,非线性电阻器不应当必然地被视为不需要的元件。 If a circuit has two or more independent 如果一个电路有两个或多个独立源,求出具体变量值(电流或电压)的一种方法是使用节点分析法或网孔分析法。另一种方法是求出每个独立源对变量的作用然后把它们进行叠加。而这种方法被称为叠加法。叠加法原理表明线性电路某个元件两端的电压(或流过元件的电流)等于每个独立源单独作用时该元件两端的电压(或流过元件的电流)的代数和。 The ratio of the phase voltage to the 相电压与相电流之比等于电路的阻抗,符号为字母Z,阻抗是一个具有量纲为欧姆的复数量。阻抗不是一个相量,因此不能通过把它乘以e jωt,并取其实部把它转换成时域形式。但是,我们把电感器看作是通过其电感量L表现为时域形式而通过其阻抗jωL表现为频域形式,电容在时域里为电容量C而在频域里为1/jωc,阻抗是某种程度 上的频域变量而非时域变量。 Both wye and delta source connections 无论是星型连接的电源还是三角形连接的电源都有重要的实际应用意义。星型连接的电源用于长距离电力传输,此时电阻损耗(I2R)将达到最小。这是由于星型连接的线电压是三角形连接的线电压的√3倍,于是,对于相同的功率来说,三角型连接的线电流是星形连接的线电流的√3倍。三角形连接的电源使用在根据三相电源而需要的三个单相电路中。这种从三相到单相的转变用在住宅布线中因为家用照明和设备使用单相电源。三相电源用在需要大功率的工业布线中。在某些应用场合,无论负载是星形连接还是三角形连接并不重要。

环境工程专业英语汇总

专业英语 环境:environment 环境工程:environmental engineering 环境保护:environmental protection 环境意识:environmental consciousness/awareness 环境问题:environmental issue/problem 环境效应:environmental effect 环境污染:environmental pollution 环境要素:environmental elements 环境因子:environmental factors 环境化学:environmental chemistry 环境生态学:environmental ecology 环境质量:environmental quality 环境自净作用:environmental self-purification/self-cleansing 水环境:watershed 水体:water body 流域:watershed 水质:water quality 水资源:water resources 供水:water supply 废水:waste water 水处理:water treatment 物理性水质指标:physical indicate of water quality 水污染物:water pollutant 生物性水质指标:biological water-quality index 水质标准:water quality standard 化学性水质指标:chemical water-quality index DS:dissolved solids BOD:biochemical oxygen demand TDS:total dissolved solids COD:chemical oxygen demand TSS:total suspended solids DO:dissolved oxygen TOC:total organic carbon PH值: TN:总氮total nitrogen TP:总磷phosphorus Zn:zinc Cu:Copper As:arsenic Cd:Cadmium Cr:chromium Ni:Nickel Hg:mercury Pb:plumbum 物理处理:physical treatment 过滤:screening 生物处理:biological treatment 沉淀:sedimentation 化学处理:chemical treatment 气浮:flotation 物理化学处理:physical-chemical treatment 蒸发:evaporation 稀释:dilution 扩散:dispersion 吹脱:stripping 好氧处理:aerobic treatment 生物膜法:bio-membrane process 厌氧处理:anaerobic treatment 生物滤池:trickling filters 活性污泥法:activated sludge process 生物接触氧化:biological contact SBR:苯乙烯-丁二烯Styrene Butadiene Rubber UASB(流式厌氧污泥床):Upflow anaerobic sludge blanket 活性污泥:activated sludge 改进型:modification 一级处理:primary treatment 二级处理:secondary treatment 三级处理:tertiary treatment 高级氧化处理:advanced treatment 生活污水:domestic wastewater 生产废水:industrial wastewater 城市生活污水:municipal wastewater 电镀废水:metalplating plants 印染废水:pulp and paper industries wastewater 浊度:turbidity 硬度:hardness 水质净化:water quality purifies 混凝沉淀:coagulate flocculating agent 活性炭吸附:activated carbon adsorption

机械工程专业英语

机械工程专业英语 课程负责人: 课程中文名称:专业英语 课程英文名称:English for Mechanical Engineering 课程类别:选修 课程学分数:2 课程学时数:32 授课对象:机械电子工程专业本科生 本课程的前导课程:公共英语,机械专业的相关课程 考核方式:平时成绩+期末考试 使用教材:《机械工程专业英语教程》施平主编(第3版)电子工业大学出版社 教学要求及目的: 了解专业英语的语法特点,熟悉专业词汇,逐步培养学生具有比较熟练的专业文献阅读理解能力、翻译能力和英文学术论文的写作能力。 教学方式: 课堂讲授、讨论与自学相结合。以教师讲授为主,引导学生积极阅读指定参考文献,完成课外作业,参与课堂讨论。有意识地积累与自己研究方向相关的词汇与文献资料,掌握专业英语学习方法。 具体教学目标: ●掌握机械工程专业方面的专业名词、专业术语 rolling contact bearing, 滚动接触轴承journal bearing, 径向轴承resonance 共振 upright drilling machine 立式钻床radial ['re?d??l]drill 摇臂钻床shaper 牛头钻床 ●掌握习惯表达方式 machine design, kinematics [,k?n?'m?t?ks] 运动学,动力学dynamic 动态 slider-crank mechanism ['mek(?)n?z(?)m] 滑动曲柄机构, assembly drawing 装配图detailed [d?'teld]drawing 明细图engineering drawing 工程图 degree-of-freedom (DOF) 自由度 a four-bar mechanism 四连杆机构vibration mechanism 振动机构 CAD Computer - Aided Design, CAM computer-aided manufacturing CAE Computer Aided Engineering ●掌握基本的专业文献阅读能力与翻译能力 ●掌握基本的写作能力 ●培养基本的专业文献资料检索能力 ●了解机械工程方面的国内外动向, 并熟悉与机械工程专业相关的其他学科与

土木工程专业英语论文.doc

Building construction concrete crack of prevention and processing Abstract The crack problem of concrete is a widespread existence but again difficult in solve of engineering actual problem, this text carried on a study analysis to a little bit familiar crack problem in the concrete engineering, and aim at concrete the circumstance put forward some prevention, processing measure. Keyword: Concrete crack prevention processing Foreword Concrete's ising 1 kind is anticipate by the freestone bone, cement, water and other mixture but formation of the in addition material of quality brittleness not and all material.Because the concrete construction transform with oneself, control etc. a series problem, harden model of in the concrete existence numerous tiny hole, spirit cave and tiny crack, is exactly because these beginning start blemish of existence just make the concrete present one some not and all the characteristic of quality.The tiny crack is a kind of harmless crack and accept concrete heavy, defend Shen and

电气工程专业英语

电路electric circuit 电气工程electrical engineering 电机electric machine 自然科学physical science 电气设备electrical device 电器元件electrical element 正电荷positive charge 负电荷negative charge 直流direct current 交流alternating current 电压voltage 导体conductor 功work 电动势electromotiveforce 电势差potential difference 功率power 极性polarity 能量守恒定律the law of conservation energy 变量variable 电阻resistance 电阻率resistivity 绝缘体insulator 电阻器resistor 无源元件passive element 常数constant 电导conductance 短路short circuit 开路open circuit 线性的linear 串联series 并联parallel 电压降voltage drop 等效电阻equivalent resistance 电容器capacitor 电感器inductor 储能元件storage element 电场electric field 充电charge 放电discharge 动态的dynamic 电介质dielectric

电容capacitance 磁场magnetic field 电源power supplu 变压器transformer 电机electric motor 线圈coil 电感inductance 导线conducting wire 绕组wingding 漏电阻leakage resistance 电子系统electronic system 结构图block diagram 功能模块functional block 放大器amplifier 滤波器filter 整形电路wave-shaping circuit 振荡器oscillator 增益gain 输入阻抗input impedance 带宽bandwidth 晶体管transistor 集成电路integrated circuit 电力电子power electronics 数字信号处理digital signal-processing 输出装置output device 模拟信号analog signal 数字信号digital signal 传感器transducer 采样值sample value 模数转换器analog-to-digital converter 频谱frequency content 采样频率sampling rate or frequendy 扰动disturbance 分立电路discrete circuit 数字化信号digitized signal 运算放大器operational amplifier 有源电路active circuit 电子部件electronic unit 封装package 管脚pin 同相端noninverting terminal 反相输入inverting input

环境科学与工程专业英语翻译

第二单元环境工程 这本书主要关于什么? 这本书的目标是使工程和科学的学生了解学科间的研究环境问题:它们的起因,为什么它们被关注,我们怎么控制它们。这本书包括: ●描述环境和环境系统意味着什么 ●关于环境破坏基础原因的信息 ●理解环境问题本质和能够定量计算它们所必要的基本科学知识 ●目前运用在水,空气,污染问题的环境控制技术的状况 ●我们目前在很多关于理解和控制人类活动、自然之间复杂相互作用的科学知识上存在着相当大的空白 ●很多环境问题能运用目前的技术消除或减少,但因为社会缺少意愿这么做或在很多例子中因为缺乏资源去这样做,这些环境问题没有被处理 一些重要的定义: 在这本书中,它们第一次被使用,定义被以大写或印刷成黑体字的形式展示 环境是围绕在我们周围的物质生命的栖息地,在这儿我们能看到,听到,触摸,闻到,和品尝到 系统依据韦氏字典,被定义为“一组或一系列能形成一个整体或者有机整体的相互关联的事物”,例如,太阳系统,灌溉系统,供应系统,世界和宇宙。 污染被定义为“在大气,水或土地中的物质的,化学的或生物的特性的不合意的改变,这一改变有害地影响人类或其它生物的健康,生存,或活动”。 当改进环境质量的目标被用来改进人类福利,“环境”一词扩展成包括所有的社会,经济和文化方面的内容。这一扩展在许多真实情况下是不可行的以及在一本被设计为一学期课程的教科书中也是不实际的。我们对环境问题的考察因此限于我们对“环境”的定义。 系统的相互作用 许多不同的环境问题都与水,空气或土地系统有关联。许多这些问题都只适用于这些系统中的一个,这为这些种类中的细目分类提供了充分的理由。这样的分类也更有用于及易于理解一个系统内的相关问题。而且,这样做是明智的,这是因为由于管理上的和行政上的原因,这些有关空气污染,水供应,废水处理和固体废物处理的子域通常由政府机构分别处理。 很遗憾的是,很多重要的环境问题不仅仅限制于空气,水或土地系统,还包括系统间的相互作用。现在举个例子,酸雨问题起源于从发电站烟囱,冶炼厂和汽车尾气中向大气排放的含硫二氧化物和氮氧化物。接着这些气体由气流运输到广阔的区域,降雨“将它们洗去”,产生了有害于水生生命,森林和农作物的酸雨。两个有关于系统间相互作用引起的环境问题有:空气中的二氧化碳的增加的全球问题,及通常具有地域性质的酸雨问题。 环境问题 许多对我们生活标准的主要改进能被归因于科学和技术的运用。这里举一些例子,你能想出其它例子吗? ●生产更多及更好质量的食物 ●创造能避免极端环境的保护所和生存空间 ●快速和可靠的运输方法的建立 ●各种交流系统的发明 ●代替人类和动物体力的机器的发明 ●安全水的供应和废物处理 ●对很多传染疾病的消除

《机械工程专业英语教程》课文翻译

Lesson 1 力学的基本概念 1、词汇: statics [st?tiks] 静力学;dynamics动力学;constraint约束;magnetic [m?ɡ'netik]有磁性的;external [eks't?:nl] 外面的, 外部的;meshing啮合;follower从动件;magnitude ['m?ɡnitju:d] 大小;intensity强度,应力;non-coincident [k?u'insid?nt]不重合;parallel ['p?r?lel]平行;intuitive 直观的;substance物质;proportional [pr?'p?:??n?l]比例的;resist抵抗,对抗;celestial [si'lestj?l]天空的;product乘积;particle质点;elastic [i'l?stik]弹性;deformed变形的;strain拉力;uniform全都相同的;velocity[vi'l?siti]速度;scalar['skeil?]标量;vector['vekt?]矢量;displacement代替;momentum [m?u'ment?m]动量; 2、词组 make up of由……组成;if not要不,不然;even through即使,纵然; Lesson 2 力和力的作用效果 1、词汇: machine 机器;mechanism机构;movable活动的;given 规定的,给定的,已知的;perform执行;application 施用;produce引起,导致;stress压力;applied施加的;individual单独的;muscular ['m?skjul?]]力臂;gravity[ɡr?vti]重力;stretch伸展,拉紧,延伸;tensile[tensail]拉力;tension张力,拉力;squeeze挤;compressive 有压力的,压缩的;torsional扭转的;torque转矩;twist扭,转动;molecule [m likju:l]分子的;slide滑动; 滑行;slip滑,溜;one another 互相;shear剪切;independently独立地,自立地;beam梁;compress压;revolve (使)旋转;exert [iɡ'z?:t]用力,尽力,运用,发挥,施加;principle原则, 原理,准则,规范;spin使…旋转;screw螺丝钉;thread螺纹; 2、词组 a number of 许多;deal with 涉及,处理;result from由什么引起;prevent from阻止,防止;tends to 朝某个方向;in combination结合;fly apart飞散; 3、译文: 任何机器或机构的研究表明每一种机构都是由许多可动的零件组成。这些零件从规定的运动转变到期望的运动。另一方面,这些机器完成工作。当由施力引起的运动时,机器就开始工作了。所以,力和机器的研究涉及在一个物体上的力和力的作用效果。 力是推力或者拉力。力的作用效果要么是改变物体的形状或者运动,要么阻止其他的力发生改变。每一种

电气工程专业英语词汇汇总(综合版)

电气工程师专业英语词汇汇总 10kV distribution substation 10kV配电所abrupt change of voltage 电压突变accumulation of electric energy 电能存储actuating coil 动作线圈adjustment diagram 调整图 alarm 报警 alarm signal 报警信号alternating light 变光灯 ammeter 电流表 apparent energy consumption unit 单位视在能耗 arc furnace 电弧炉 armature 电枢 arrester; lighting arrester; surge diverters 避雷器 automatic voltage regulator 电压自动调整器backlighting; background illumination 背景照明 battery box 电池箱 battery charger 电池充电器battery contactor 电池接触器battery fuse 电池保险丝battery resistor 电池电阻器 blow-out coil 磁吹线圈 boom 吊杆 bracket (OCS) 底座(接触网); 支架;托架bracket for headspan wire 定位索底座bridge 电桥 brush 电刷 built-in wardrobe; built-in closet; closet 壁灯 bulb; light(lamp) bulb; electric bulb 灯泡 butterfly valve with electric actuator 电动蝶阀 button 电钮 cable and accessories 电缆及附件 cable armour 电缆铠装 cable bays 电缆电线间隔cable box 电缆箱 cable bracket; cable tray 电缆托架 cable continuity test 电路复测 cable differential protection 电缆差动保护

(完整版)环境工程专业英语考试重点词汇

Environmental quality 环境质量Acid rain酸雨 Sulfur dioxide二氧化硫Nitrogen oxide 氧化氮Automobile exhausts汽车尾气Infectious diseases传染病Waterborne diseases通过水传播的疾病 Carbon dioxide二氧化碳Environmental disturbance环境破坏 Aquatic life 水生物 Detection limits 检出限Qualitative 定性的Quantitative定量的Characterization 表征性能描写Unpleasant odors 难闻的气味Trace l level 痕量微量Carbon oxide碳化物 Carbon monoxide 一氧化碳Carbon dioxide 二氧化碳Sulfur oxide 硫化物 Sulfur dioxide二氧化硫 Sulfur trioxide 三氧化硫Nitrogen oxide 氮化物 Nitrous oxide一氧化二氮 Nitric oxide一氧化氮 Nitrogen dioxide 二氧化氮Ethane 乙烷 Propane 丙烷Photochemical oxidants 光氧化剂 Ozone臭氧 Aldehydes 乙醛 Sulfate salts硫酸盐 Hydrogen sulfide 硫化氢Ammonia氨气 Sulfur acids 硫酸 Nitric acid 硝酸 Primary air pollutant一次污染物Second air pollutant二次污染物Biofiltration生物过滤 Volatile organic compounds挥发性化合物Trickling filter滴滤器 Municipal sewage treatment plant市政污水处理厂 Wastewater treatment plant污水 处理厂 Rendering plant 炼油厂 Ethanol 乙醇 Biodegradation 生物降解 Bioremediation 生物治理 Suspended solid(SS)悬浮颗粒 物 Volatile suspended solid(VSS) 挥 发性悬浮颗粒物 Biochemical oxygen demand (BOD)生化需氧量 Heavy mental重金属 Domestic sewage 生活废水 Chemical oxygen demand (COD) 化学需氧量 Sewage 污水、废水 Microorganism微生物 Microbe微生物 Bacteria(复数) Bacterium(单数)细菌 Oxidizer氧化剂 Oxidant氧化剂 Dissolved oxygen溶解氧 Residence time 停留时间 Eutrophic lake富营养化的湖泊 Sanitary sewage 生活污水 Aeration tank 曝气池 Sedimentation tank 沉淀池 Eutrophication 富营养化 Adsorption 吸附 Activated carbon 活性炭 Activated sludge活性污泥 Coagulation 絮凝、凝固 Flocculation 混凝 Sedimentation 沉淀、沉积 Hydrophilic 亲水的、吸水的 Oxidizing agent 氧化剂 Reverse osmosis 反向渗透 Membrane膜 Groundwater地下水 Surface water 地表水 Aluminum sulfate 硫酸铝 Screening (用拦污栅)隔离 Turbidity 浊度,浑浊性 Colloidal胶体 Chlorine dioxide 二氧化氯 Ultraviolet light 紫外线 Limestone 石灰石 Incinerator 焚烧炉 Hazardous waste 危险废物 Refuse垃圾、废物 Environmental protection agency 环保部 Hydrogen sulfide 硫化物 Decontamination 净化,消 除……的污染 Aerobic 需氧的 Anaerobic 厌氧的 Decibel meter 分贝仪 Subsonic 亚声速的 Supersonic 超声速的 Muffler消声器 Ecological disruptions 生态破坏 Aquatic ecosystem 水环境系统 Environmental impact assessments环境影响评价 Kinetics 动力学 Steady-state 稳态的 Point source discharge点源排放 Receiving water收纳水体 Nitrogen oxide 氮氧化物 Photochemical oxidant 光化学氧 化剂 Carbon monoxide一氧化碳 Coliform bacteria 大肠杆菌

机械工程专业英语

Lesson1 1、the branch of scientific analysis, which deals with motions, time, and forces, is called mechanics and is made up of two parts, statics and dynamics. Statics deals with the analysis of stationary systems, i.e., those in which time is not a factor, and dynamics deals with systems, which change with time. 对运动时间和作用力作出科学分析的分支成为力学。他由静力学和动力学两部分组成。静力学对静止系统进行分析,即在其中不考虑时间这个引述,动力学对事件而变化的系统进行分析。 2、Any two such forces acting on a body constitute a couple. The arm of the couple is the perpendicular distance between their lines of action, and the plane of the couple is the plane containing the two lines of action. 作用在一个刚体上的两个这样的的里构成一个力偶。力偶臂是这两个条作用线之间的垂直距离,力偶面是包含着两条作用线的平面。 3、Mechanics deal with two kinds of quantities: scalars and vectors. Scalar quantities are those with which a magnitude alone is associated. Examples of scalar quantities in mechanics are time, volume, density, speed, energy, and mass. Vector quantities, on the other hand, possess direction as well as magnitude. Examples of vectors are displacement, velocity, acceleration, force, moment, and momentum. 力学涉及两种类型的量,标量和矢量。标量是那些只有大小的量。在力学中标量的例子有时间、体积、密度、速率、、能量和质量。另一方面,矢量既有大小又有大小又有方向。矢量的例子有位移、速度、加速度、力、力矩、动量。 Lesson2(此课后面没翻译,翻译的不太准确谅解) 1 、The turning of a part in a lathe is another example of several forces in action.(as shown in figure1) 车床车削是一些力在起作用的另一个例子。figure1(如图)。 2 、If this workpiece is held between the centers of the lathe, the centers exert a compressive force against the work. 如果这个工件在放在车床中心之间,中心车床对工作产生压力。 3、 Rotary motion is required to drill holes, turn parts in a lathe, mill surfaces, or drive a generator or fan belt. 扶轮运动需要去钻孔,在车床上转换两件,表面,或驱动发电机或风扇皮带 4 、Harmonic and Intermittent Motion(谐和运动和间歇运动): Any simple vibration, such as the regular back, and forth movement of the end of a pendulum, is simple harmonic motion. Lesson4 1 、Virtually all machines contain shafts. The most common shape for shafts is circular and the cross section can be either solid or hollow. 实际上,几乎所有的机器中都装有轴。轴的最常见的形状是圆形,其截面可以是实心的,也可以是空心的(空心轴可以减轻重量)。有时也采用矩形轴,例如,螺丝起子的头部.套筒扳手和控制旋钮的杆。 2、 A shaft must have adequate torisonal strength to transmit torque and not be over stressed it must also be torsional stiff enough so that one mounted component does not deviate excessively from its original angular position relative to a second component mounted on the same shaft. 为了在传递扭矩时不发生过载,轴应该有适当的抗扭强度。轴还应该具有足够的抗扭强度,以使在同一轴上的两个传动零件之间的相对转角不会过大。 3 、Components such as gears and pulleys are mounted on shafts by means of key. The design of the key and the corresponding keyway in the shaft must be properly evaluated. For example, stress concentrations occur in shafts due to keyways, and the material removed to from the keyway further weakens the shaft. 齿轮和皮带轮等零件通过键连接在轴上。在键及轴上与之相对应的键槽的设计中,必须进行认真的计算。例如,轴上的键槽会引起应力集中,由于键槽的存在会使轴的横截面积减小,会进一步减弱轴的强度。 4、Another important aspect of shaft design is the method of directly connecting one shaft to another. Devices such as rigid and flexible couplings accomplish this. 轴的设计工作中的另一个重要方面是一根轴与另一根轴之间的直接连接方法。这是由刚性或者弹性联轴器来实现的。 Lesson5 1、The term shaft usually refers to a relatively long member of round cross section that rotates and

通信工程专业英语论文设计

The General Situation of AT89C51 The AT89C51 is a low-power, high-performance CMOS 8-bit microcomputer with 4K bytes of Flash Programmable and Erasable Read Only Memory (PEROM) and 128 bytes RAM. The device is manufactured using Atmel’s high density nonvolatile memory technology and is compatible with the industry standard MCS-51?instruction set and pin out. The chip combines a versatile 8-bit CPU with Flash on a monolithic chip; the Atmel AT89C51 is a powerful microcomputer which provides a highly flexible and cost effective solution to many embedded control applications. Features: ?Compatible with MCS-51?Products ?4K Bytes of In-System Reprogrammable Flash Memory ?Endurance: 1,000 Write/Erase Cycles ?Fully Static Operation: 0 Hz to 24 MHz ?Three-Level Program Memory Lock ?128 x 8-Bit Internal RAM ?32 Programmable I/O Lines ?Two 16-Bit Timer/Counters ?Six Interrupt Sources ?Programmable Serial Channel ?Low Power Idle and Power Down Modes The AT89C51 provides the following standard features: 4K bytes of Flash, 128 bytes of RAM, 32 I/O lines, two 16-bit timer/counters, a five vector two-level interrupt architecture, a full duplex serial port, on-chip oscillator and clock circuitry. In addition, the AT89C51 is designed with static logic for operation down to zero frequency and supports two software selectable power saving modes. The Idle

环境工程专业英语钟理_翻译

第一单元环境工程 这本书主要关于什么? 这本书的目标是使工程和科学的学生了解学科间的研究环境问题:它们的起因,为什么它们被关注,我们怎么控制它们。这本书包括: ●描述环境和环境系统意味着什么 ●关于环境破坏基础原因的信息 ●理解环境问题本质和能够定量计算它们所必要的基本科学知识 ●目前运用在水,空气,污染问题的环境控制技术的状况 ●我们目前在很多关于理解和控制人类活动、自然之间复杂相互作用的科学知识上存在着相当大的空白●很多环境问题能运用目前的技术消除或减少,但因为社会缺少意愿这么做或在很多例子中因为缺乏资源去这样做,这些环境问题没有被处理 一些重要的定义: 在这本书中,它们第一次被使用,定义被以大写或印刷成黑体字的形式展示 环境是围绕在我们周围的物质生命的栖息地,在这儿我们能看到,听到,触摸,闻到,和品尝到 系统依据韦氏字典,被定义为“一组或一系列能形成一个整体或者有机整体的相互关联的事物”,例如,太阳系统,灌溉系统,供应系统,世界和宇宙。 污染被定义为“在大气,水或土地中的物质的,化学的或生物的特性的不合意的改变,这一改变有害地影响人类或其它生物的健康,生存,或活动”。 当改进环境质量的目标被用来改进人类福利,“环境”一词扩展成包括所有的社会,经济和文化方面的容。这一扩展在许多真实情况下是不可行的以及在一本被设计为一学期课程的教科书中也是不实际的。我们对环境问题的考察因此限于我们对“环境”的定义。 系统的相互作用 许多不同的环境问题都与水,空气或土地系统有关联。许多这些问题都只适用于这些系统中的一个,这为这些种类中的细目分类提供了充分的理由。这样的分类也更有用于及易于理解一个系统的相关问题。而且,这样做是明智的,这是因为由于管理上的和行政上的原因,这些有关空气污染,水供应,废水处理和固体废物处理的子域通常由政府机构分别处理。 很遗憾的是,很多重要的环境问题不仅仅限制于空气,水或土地系统,还包括系统间的相互作用。现在举个例子,酸雨问题起源于从发电站烟囱,冶炼厂和汽车尾气中向大气排放的含硫二氧化物和氮氧化物。接着这些气体由气流运输到广阔的区域,降雨“将它们洗去”,产生了有害于水生生命,森林和农作物的酸雨。两个有关于系统间相互作用引起的环境问题有:空气中的二氧化碳的增加的全球问题,及通常具有地域性质的酸雨问题。 环境问题 许多对我们生活标准的主要改进能被归因于科学和技术的运用。这里举一些例子,你能想出其它例子吗? ●生产更多及更好质量的食物 ●创造能避免极端环境的保护所和生存空间 ●快速和可靠的运输方法的建立 ●各种交流系统的发明 ●代替人类和动物体力的机器的发明 ●安全水的供应和废物处理 ●对很多传染疾病的消除 ●通过在发达国家运用改进的水技术对大部分水传染的疾病的消除 ●通过更好的生产力(带来的)闲余时间的有效性,为文化的,娱乐的活动提供机会。 ●避免例如洪水,干旱,地震,火山爆发的自然灾害的最坏影响 然而,通过这些改进,已经带来了不良的负面影响,例如耕地的丧失,消失的森林,环境的污染和

机械工程专业英语教程第三版lesson25

机械五班王乘龙 Lesson 25 Computer Graphics(Reading Material) The term computer graphics refers to the entire spectrum of drawing with the aid of a computer,from straight lines to color animation.An immense range of artistic capabilities resides under the heading of computer graphics and drafting is just one of them. Computer graphics was originally associated with the field of electronics.Companies directly involved in electronics design and manufacturing were the first to experiment and work with computer graphics.As they tested equipment and software,new demands arose that required changes and advances in both hardware and software.Equipment and programs got better,faster,more powerful,less expensive,colorful,and fun to operate.The potential for this new computer development was endless.And as engineers and drafters learned to work with the new tools in a technically demanding atmosphere,artists were using the new tools in an atmosphere of unlimited structure.We see the structure and freedom brought by engineers and artists to computer graphics as we watch animated television network.Complex mathematical

相关主题
文本预览
相关文档 最新文档